List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. TWO DIFFERENT DETECTORS, BOTH USING THIN, CRACKED-ETHYLENE FOILS, WILL BE MADE.

    SBC: Arizona Carbon Foil Co Inc            Topic: N/A

    TWO DIFFERENT DETECTORS, BOTH USING THIN, CRACKED-ETHYLENE FOILS, WILL BE MADE. ONE DETECTOR CONSISTS OF A LOW-PRESSURE GAS CELL, SEALED AT EITHER END WITH ALUMINIZED ETHYLENE FOILS ABOUT 10 MICROGRAMS PER SQUARE CENTIMETER THICK. LIGHT GENERATED WHEN THE PROTON BEAM TRAVERSES THE GAS WILL BE VIEWED THROUGH A SIDE WINDOW; THE INTENSITY OF THE LIGHT, AS MEASURED WITH A PHOTOMULTIPLIER OR PHOTODIODE ...

    SBIR Phase I 1984 Department of DefenseAir Force
  2. GAASP TOP SOLAR CELLS FOR INCREASED SOLAR CONVERSION EFFICIENCY

    SBC: ASTROPOWER, INC.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseAir Force
  3. EXPLOSIVE ENVIRONMENT

    SBC: Baker Engineering and Risk Consultants Inc.            Topic: N/A

    A DESIGN FOR A RUGGED, HIGH-FREQUENCY, ACCELERATION-INSENSITIVE AIRBLAST GAGE IS PROPOSED. THE PROPOSED GAGE SHOULD HAVE ITS FUNDAMENTAL VIBRATION FREQUENCY ABOVE 400 KHZ, BE ROUGHLY CYLINDRICAL IN SHAPE WITH DIAMETER AND LENGTH BOTH LESS THAN ONE INCH, AND HAVE BUILT-IN COMPENSATION WHICH WILL LIMIT SPURIOUS SIGNALS DUE TOACCELERATION TO VERY LOW LEVELS. FULLSCALE OUTPUT FOR AN APPLIED AIRBLAST P ...

    SBIR Phase I 1984 Department of DefenseArmy
  4. HEAT EXCHANGE MATRIX

    SBC: Elanco Inc.            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseArmy
  5. INVESTIGATE THE REQUIREMENTS FOR A SEMICONDUCTOR BASED TIMED FAULT MODULE: PHYSICAL DIMENSIONS, ELECTRICAL SPECIFICATIONS, ERGONOMIC REQUIREMENTS, POSSIBLE CONFIGURATIONS, AND LEVEL OF USER EXPERTISE NECESSARY TO SUCCESSFULLY UTILIZE THE ADAPTER.

    SBC: Electronic Sys Devlpmnt/trng            Topic: N/A

    INVESTIGATE THE REQUIREMENTS FOR A SEMICONDUCTOR BASED TIMED FAULT MODULE: PHYSICAL DIMENSIONS, ELECTRICAL SPECIFICATIONS, ERGONOMIC REQUIREMENTS, POSSIBLE CONFIGURATIONS, AND LEVEL OF USER EXPERTISE NECESSARY TO SUCCESSFULLY UTILIZE THE ADAPTER. DESIGN, PROTOTYPE, AND EVALUATE A DISCRETE COMPONENT VERSION WITH DATA TO DETERMINE CUSTOM LARGE SCALE INTEGRATION/PROGRAMMABLE LOGIC ARRAY MANUFACTURE P ...

    SBIR Phase I 1984 Department of DefenseNavy
  6. GROWTH OF GAAS USING ION CLUSTER BEAM TECHNOLOGY

    SBC: ETONNET, INC.            Topic: N/A

    THIS PROGRAM WOULD INVESTIGATE THE GROWTH OF

    SBIR Phase II 1984 Department of DefenseAir Force
  7. HIGH LEVEL SIMULATION OF ELECTRONIC SYSTEMS

    SBC: Information Research            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseNavy
  8. IT IS PROPOSED TO UTILIZE A GAS DENSITY DETECTOR FOR PROFILING GASES ENCOUNTERED IN THE HELICOPTER ENVIRONMENT.

    SBC: Napp, Inc.            Topic: N/A

    IT IS PROPOSED TO UTILIZE A GAS DENSITY DETECTOR FOR PROFILING GASES ENCOUNTERED IN THE HELICOPTER ENVIRONMENT. THE DETECTOR, COUPLED WITH AN APPROPRIATE GAS CHROMATOGRAPH COLUMN, HAS BEEN PROVED IN IDENTIFYING AND QUANTIFYING INDIVIDUAL COMPONENTS IN COMPLEX GAS MIXTURES. THE GAS DENSITY DETECTOR GIVES A RESPONSE THAT IS A FUNCTION OF THE DIFFERENCE IN DENSITY OF THE SELECTED CARRIER GAS AND THE ...

    SBIR Phase I 1984 Department of DefenseArmy
  9. IMPROVED RADAR TRACKING AGAINST CHAFF COUNTERMEASURES

    SBC: Pinson Associates Inc.            Topic: N/A

    THIS PROPOSED PROGRAM IS TO INVESTIGATE THE FEASIBILITY OF USING UNIQUE FILTERING TECHIQUES TO PROCESS PULSE-TO-PULSE RCS AND PHASE DATA TO TRACK AN AIR VEHICLE IN THE PRESENCE OF CHAFF. THE PROPOSED TECHNIQUE WOULD PERMIT TRACKING THE AIRCRAFT WITH OR WITHOUT THE PRESENCE OF CHAFF. IT IS ANTICIPATED THAT THIS INSTRUMENTATION COULD BE ADDED TO ANY COHERENT OR SEMI-COHERENT RADAR AND BE FAR SUPERIO ...

    SBIR Phase II 1984 Department of DefenseArmy
  10. TESTING OF COMPOSITE ROCKET MOTOR COMPONENTS

    SBC: Scientific Measurement Systems            Topic: N/A

    A METHOD BASED ON THE PROCESSES OF COMPUTERIZED TOMOGRAPHY IS PROPOSED FOR NONDESTRUCTIVE QUANTITATIVE ASSESSMENT OF DAMAGE FEATURES IN FIBER/RESIN COMPOSITE COMPONENTS OF ROCKET MOTORS. AN IN-DEPTH STUDY WILL BE UNDERTAKEN TO ESTABLISH THE FEASIBILITY OF THE APPROACH. AN EXTENSIVE DATA BASE WILL BE GENERATED FROM COMPREHENSIVE TOMOGRAPHIC EXAMINATIONS OF A CONTROLLED REPRESENTATIVE OBJECT. THE IN ...

    SBIR Phase I 1984 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government