List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Advanced Aluminum Alloy: Extruded Thin Wall Structural Concepts

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The primary objective of this proposed work is to develop a method of producing integrally stiffened, complex shaped monolithic structural components in high strength aluminum alloys at a lower cost and lighter weight than equivalent conventional built-up assemblies. In Phase I the feasibility of attaining this objective will be demonstrated by conducting a series of subscale experiments based upo ...

    SBIR Phase I 1994 Department of DefenseAir Force
  2. Fabrication of Functional Gradient Materials Thru Solid Freeforming

    SBC: Sensintel Inc.            Topic: N/A

    Solid Free Forming of monolith and uniform discrete reinforced materials has been demonstrated by fused deposition of heavily loaded slurries. In this program we will extend the fused deposition process to functional gradient material. The composition of material deposited will be controlled by the flow rates of two individual materials that are mixed in a low dead volume head. Thus, it will be po ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  3. Novel Membrane System to Automatically Deglycerolize Thawed Frozen Human Blood

    SBC: Advanced Haemotechnologies            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseArmy
  4. PRETENSIONING DEVICE DESIGN FOR CRASH PROTECTION

    SBC: Advanced Structures Technology            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseNavy
  5. Monolithically Interconnected, Thin Silicon Solar Cell Array

    SBC: ASTROPOWER, INC.            Topic: N/A

    ASTROPOWER PROPOSES TO DEVELOP A LIGHTWEIGHT, HIGH EFFICIENCY, MONOLITHICALLY INTERCONNECTED THIN SILICON SOLAR CELL ARRAY. THE ARRAY INCORPORATES AN INNOVATIVE TECHNIQUE TO ACHIEVE ELECTRICAL ISOLATION AND INTERCONNECTION OF THE ARRAY ELEMENTS. A MONOLITHICALLY INTERCONNECTED ARRAY TECHNOLOGY OFFERS REDUCED COST AND COMPLEXITY AS WELL AS INCREASED RELIABILITY AND YIELD COMPARED TO CONVENTIONAL SO ...

    SBIR Phase II 1994 Department of DefenseMissile Defense Agency
  6. High Quantum Efficiency, Low-noise, Radiation-tolerant AlGaP CCD-UV

    SBC: ASTROPOWER, INC.            Topic: N/A

    ASTROPOWER PROPOSES TO DEVELOP A NEW FRONT-ILLUMINATED, ALUMINUM GALLIUM PHOSPHIDE (AlGaP) BASED, CHARGE-COUPLED DEVICE (CCD), ULTRAVIOLET (UV) IMAGING ARRAY. THIS NOVEL ARRAY TECHNOLOGY HAS NEVER BEEN SUCCESSFULLY DEVELOPED. THREE NEW INNOVATIONS WILL BE NECESSARY TO ACOMPLISH THE AlGaP CCD. THESE ARE: AlGaP MATERIAL QUALITY WHICH CAN SUPPORT A CCD DEVICE; THE GROWTH OF A NATIVE OXIDE ON THE AlGa ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  7. InAsSb/GaSb Infrared Light-Emitting Diodes (LED's)

    SBC: ASTROPOWER, INC.            Topic: N/A

    AstroPower proposes to develop intense, mass-producible, low-cost 4 to 5 micron light-emitting diodes (LED's) using liquid-phase heteroepitaxy of lattice-matched InAsSb on GaSb substrates. The brightest visible LEDs (Ultrabrights) currently available are being produced commercially by the liquid phase heteroepitaxy process using materials with bandgaps in the appropriate visible range for the part ...

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Embedded UV Combustion Sensor

    SBC: ASTROPOWER, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  9. LOW-DEFECT SIC MATERIAL BY LIQUID-PHASE EPITAXIAL LATERAL OVERGROWTH

    SBC: ASTROPOWER, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. High Explosive Structural Damage Assessment Computer Code

    SBC: Baker Engineering and Risk Consultants Inc.            Topic: N/A

    The proposed project consists of developing a software package which can be used in the development of site plans at facilities where high explosives are stored or handled. The software will be a public release product and is intended for approval by the DDESB. Site plans developed under proper application of the software will be in compliance with explosive safety siting standards in DOD 6055.9. ...

    SBIR Phase I 1994 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government