List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. A Computational Tool for Modeling Geometric Proximity of Independent Systems

    SBC: D&P LLC            Topic: AF083268

    This SBIR Phase I project proposes to develop an accurate viscous CFD algorithm which can include various small gaps between both static and moving components into the analysis. It is not an easy task to model those small gaps in the current CFD codes due to the geometric proximity, especially for moving components. However, those small gaps may have a significant impact on the aerodynamic, aeroel ...

    SBIR Phase I 2009 Department of DefenseAir Force
  2. A High Production Rate Process to Fabricate Low Cost High Strength MMCs In Net Shape

    SBC: ATS-MER, LLC            Topic: A07063

    Military systems are traditionally produced in steel because of excellent mechanical properties and low cost. For a lighter weight and more mobile force, all aspects of military systems are being scrutinized for possible weight reduction. Metal matrix composites with discontinuous reinforcements offer the potential for the very high strength and modulus required for targeted Army applications su ...

    SBIR Phase II 2009 Department of DefenseArmy
  3. A Metallic Nanocomposite with the Highest Strength and Modulus Ratio of Any Metallic Material for Applications Weapons Systems

    SBC: ATS-MER, LLC            Topic: SB082007

    New and innovative materials are required to provide revolutionary capabilities to DoD platforms and weapon systems. Magnesium is the lightest metal that can be applied to defense, structural and commercial applications. Magnesium’s utilization is often restricted since it suffers from inherent poor corrosion resistance and mechanical deficiencies. Nanoreinforcements in magnesium have demonst ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  4. A Novel Microwave Sensor for Non- Destructive Evaluation of Silicon Nitride Bearing Balls

    SBC: ALPHASENSE, INC.            Topic: AF083109

    In this proposal, Alphasense, Inc. details the development of a novel microwave NDE sensor for defect inspections in silicon nitride bearing balls. The key innovations of this proposal include the following: a) the use of the spherical bearing ball as a dielectric resonator, thus enabling us to correlate the resonance characteristics of the bearing ball with various defects; b) the measurements in ...

    SBIR Phase I 2009 Department of DefenseAir Force
  5. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In this proposal, AlphaSense, Inc. (AI) and the Pennsylvania State University (PSU) detail the development of a novel noninvasive microwave sensor to quantify the DoS in marine aluminum alloys. The key innovations of this proposal include the following: a) DoS quantifications based on the correlation between the surface resistivity with the microstructures of the aluminum alloys, b) measurements o ...

    STTR Phase I 2009 Department of DefenseNavy
  6. A Point-of-Care Assay for the Detection of Coxiella Burnetii (Q fever) Infection in Soldiers Deployed to Iraq

    SBC: Inbios International Inc            Topic: A08178

    The objective of this study is to develop a robust, field deployable, and a cost effective rapid screening assay for the detection of Q fever infection caused by Coxiella burnetii using human blood and sera. The test will utilize a lateral flow based immunochromatographic system (dipstick). The proposed assay would be a very useful screening tool to assess Q fever infection in the fields, in remo ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. A Rapid and Cost-Effective Approach to Nanostructural Analysis of Semiconductor Devices

    SBC: FABMETRIX, INCORPORATED            Topic: AF083170

    Phase I proposal focuses on the demonstration of the feasibility to improve the efficiency and to lower the cost associated with nanostructural analysis of semiconductor devices by implementing a two-pronged strategy. The proposed methodology combines streamlining the required specimen preparation processes with application of test structures for the above purpose. This strategy will minimize th ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. A Spectrally Dynamic Berth Light for Active Circadian Cycle Management

    SBC: BIZ RESEARCH, INC.            Topic: SB082055

    Navy and other armed service personnel frequently encounter environmental conditions that upset the natural circadian rhythm and would profit from a light that offers corrective management. The feasibility of a new berth light will be studied. It will meet the standard requirements but also have spectral, timed, controlled and intense enough light to affect the human circadian system. The advanta ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  9. A Unified Multidimensional Hybrid Gaskinetic BGK method using Cartesian Grid for Nonequilibrium and Chemically Reacting Flows

    SBC: Zona Technology, Inc            Topic: AF08T019

    A consistent time-accurate Hybrid gaskinetic Bhatnagar-Gross-Krook (BGK) method (H-BGK), valid in the full Knudsen number (Kn) range, is proposed using Cartesian grid as a 3D tool to handle hypersonic aerothermodynamics from continuum to thermochemical nonequilibrium and ionized/plasma flows.  H-BGK method is to provide automated sub-domain solutions by direct BGK method and the gaskinetic BGK me ...

    STTR Phase I 2009 Department of DefenseAir Force
  10. A Unique Process for the Bulk Anodizing of Small Aluminum Parts

    SBC: ATS-MER, LLC            Topic: N08114

    Currently, small aluminum parts are racked on aluminum prongs for anodizing which is time consuming, ineffective and costly. Bulk anodizing of small parts without the need for individual racking of parts has become a necessity for anodizing small arms parts to reduce cost, and enhance performance and reliability including uniformity of the anodized layer. Barrel type anodizing in state-of-the-art ...

    SBIR Phase I 2009 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government