List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Validation and Verification of Nonlinear Structural Dynamic Models

    SBC: ACTA, LLC            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseDefense Threat Reduction Agency
  2. Enhanced Angle Estimation in Adaptive Low Frequency Radar Systems

    SBC: Adaptive Sensors Inc.            Topic: N/A

    A target angle estimation technique making effective use of the spatial degrees of freedom of an adaptive array radar system has been developed by ASI and demonstrated to yield unbiased and efficient angle estimates in near-main beam jammer environments. The program objective of progressing towards a feasibility demonstration includes optimizing system designs including the detection and post-dete ...

    SBIR Phase II 1995 Department of DefenseAir Force
  3. Selenium Coated CMOS Image Sensor

    SBC: Adept Ic Design            Topic: N/A

    We propose to develop sensor technology capable of high resolution imaging of electromagnetic radiation in the energy spectrum spanning the ultraviolet to x-rays. Phase I calls for the fabrication of small scale image sensors. These sensors are fabricated from CMOS arrays, coated with selenium and then a conductive electrode. These sensors will undergo testing and performance evaluation for both x ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  4. Functional Gradient Materials

    SBC: Sensintel Inc.            Topic: N/A

    Functional gradient materials (FGMs) have a microstructurally graded transition in composition (e.g. zirconia to a nickel based superalloy). The graded transition eliminates problems associated with a discrete interface such as poor mechanical strength and transport losses. They are being actively pursued by the engineering community, particularly in Japan, as a means of taking advantage of two di ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  5. Aqueous Biopolymers for Ceramic Solid Freeform Fabrication

    SBC: Sensintel Inc.            Topic: N/A

    The proposed program is to develop the use of aqueous biopolymers for the solid freeform fabrication of ceramic components. It will be a collaborative effort between ACR and Battelle PNL. PNL has expertise in colloidal ceramic processing and experience on utilizing biopolymers in ceramic slurries. ACR has already developed extensive software and hardware capability for solid freeform fabricatio ...

    SBIR Phase I 1995 Department of DefenseNavy
  6. Composite Reinforcing Fiber and Interfacial Coating Process

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  7. Ultrathin BESOI for Fully Depleted CMOS Applications

    SBC: Aracor            Topic: N/A

    BESOI fabrication techniques will be evaluated to select an optimum approach for manufacturing ultrathin silicon films on 150- and 200-mm diameter wafers. A supplier of such BESOI material will be identified. The baseline will be the SiGe etch stop and strain-sensitive etch method which ARACOR has already demonstrated to be capable of producing defect-free, undoped films that are as thin as 1000 a ...

    SBIR Phase II 1995 Department of DefenseNavy
  8. The Development of a Laser Focal Plane Array

    SBC: Advanced Scientific Concepts, LLC            Topic: N/A

    Ladar is becoming increasingly important as a military surveillance, tracking and navigational tool. Current ladar systems use a single pixel combined with a mechanical, two-dimensional scanner to obtain an image. One laser pulse must be transmitted and received for each pixel in the image and considerable processing is required to register the different pixels and assure a coherent two-dimensiona ...

    SBIR Phase II 1995 Department of DefenseAir Force
  9. PRETENSIONING DEVICE DESIGN FOR CRASH PROTECTION

    SBC: Advanced Structures Technology            Topic: N/A

    THE CURRENT FIVE-POINT MILITARY AVIATION RESTRAINT SYSTEM (FOR NON-EJECTION CREW SEATS) WHEN PROPERLY USED (I.E., TIGHTLY ADJUSTED), CAN PROVIDE GOOD OCCUPANT CRASH PROTECTION. THE RESTRAINT SYSTEMS ALSO INCLUDE AN INERTIAL REEL ON THE SEAT BACK WHICH IS DESIGNED TO LOCK THE SHOULD STRAPS AT THE ONSET OF A CRASH, IN THE SAME MANNER THAT THE COMMON AUTOMOBILE SEAT BELT INERTIAL REEL LOCKS WHEN JERK ...

    SBIR Phase II 1995 Department of DefenseNavy
  10. Wavelet-based Identification of Specific Emitters

    SBC: Advent Systems, Inc.            Topic: N/A

    The Discrete Wavelet Transform (DWT) is a Time-Frequency Distribution (TFD) which offers the potential to efficiently characterize both transient and global intrapulse signal features in a highly compressed format. The overall objective of this three phase effort is to develop Wavelet analysis as a new approach to modulation on pulse (MOP) processing in support of electronic warfare (EW) systems i ...

    SBIR Phase I 1995 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government