List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Advanced Analytical Techniques for Determining Metal Speciation in Contaminated Soils

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseArmy
  2. Fracture Mechanics Based Life Prediction of High Temperature Composite Joints

    SBC: ADTECH SYSTEMS RESEARCH INC            Topic: N/A

    An important aspect in the design of aircraft structure and aeropropulsion components made of high temperature composite materials is damage tolerance and life prediction. Many components contain joints between composites and metals. There is a need to develop methods for predicting life of such components and then implementing the methods in software for design calculations on computers. The prop ...

    SBIR Phase II 1995 Department of DefenseAir Force
  3. Functional Gradient Materials

    SBC: Sensintel Inc.            Topic: N/A

    Functional gradient materials (FGMs) have a microstructurally graded transition in composition (e.g. zirconia to a nickel based superalloy). The graded transition eliminates problems associated with a discrete interface such as poor mechanical strength and transport losses. They are being actively pursued by the engineering community, particularly in Japan, as a means of taking advantage of two di ...

    SBIR Phase I 1995 Department of DefenseMissile Defense Agency
  4. Aqueous Biopolymers for Ceramic Solid Freeform Fabrication

    SBC: Sensintel Inc.            Topic: N/A

    The proposed program is to develop the use of aqueous biopolymers for the solid freeform fabrication of ceramic components. It will be a collaborative effort between ACR and Battelle PNL. PNL has expertise in colloidal ceramic processing and experience on utilizing biopolymers in ceramic slurries. ACR has already developed extensive software and hardware capability for solid freeform fabricatio ...

    SBIR Phase I 1995 Department of DefenseNavy
  5. Composite Reinforcing Fiber and Interfacial Coating Process

    SBC: Sensintel Inc.            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseAir Force
  6. Micromachined Silicon Temperature Extreme Sensor Requiring No Power Source

    SBC: ADVANCED MICROMACHINES, INC.            Topic: N/A

    The objective of this research is to design a micromechanical temperature sensor capable of recording temperature extremes experienced beyond a preset value without the use of electrical power. The temperature sensor's memory will be mechanically induced. The sensor will be either in an electronically resettable form, or, less expensively, in a disposable form. The proposed device will be microfab ...

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency
  7. Microfabricated Silicon Carbide Heat Flux Sensor

    SBC: ADVANCED MICROMACHINES, INC.            Topic: N/A

    The goal of this project is to develop new high-temperature heat flux sensors for heat transfer measurements in turbomachinery. The following obejctives will be pursued. Pototype sensors will be demonstrated which function at temperatures as high as 600C with a frequency response up to 50kHz. Using microfabrication techniques, miniature sensors will be produced for better than 0.1 mm spatial resol ...

    SBIR Phase II 1995 Department of DefenseAir Force
  8. PRETENSIONING DEVICE DESIGN FOR CRASH PROTECTION

    SBC: Advanced Structures Technology            Topic: N/A

    THE CURRENT FIVE-POINT MILITARY AVIATION RESTRAINT SYSTEM (FOR NON-EJECTION CREW SEATS) WHEN PROPERLY USED (I.E., TIGHTLY ADJUSTED), CAN PROVIDE GOOD OCCUPANT CRASH PROTECTION. THE RESTRAINT SYSTEMS ALSO INCLUDE AN INERTIAL REEL ON THE SEAT BACK WHICH IS DESIGNED TO LOCK THE SHOULD STRAPS AT THE ONSET OF A CRASH, IN THE SAME MANNER THAT THE COMMON AUTOMOBILE SEAT BELT INERTIAL REEL LOCKS WHEN JERK ...

    SBIR Phase II 1995 Department of DefenseNavy
  9. Process Optimization Through Discovery and Integration of Materials and Processing Properties

    SBC: Ai Ware, Inc.            Topic: N/A

    The objective is to increase the productivity of materials research by automating the infrastructure of such efforts. Global competition in manufacturing, limitations in fiscal and physical resources, ecological constraints, and technically challenging mission goals require that productivity be increased in the design, fabrication, and utilization of new or improved materials. The technical approa ...

    SBIR Phase II 1995 Department of DefenseAir Force
  10. LO Rotor Blade De-Ice Systems Evaluation

    SBC: ANALYTIC DESIGNS INC            Topic: N/A

    This proposal investigates candidate main rotor blade de-icing systems which offer signature reduction capabilities. In comparison to traditional mechanical boot style de-icing systems, electrical de-icing systems are considered. One such candidate is a novel electrical thin film resistive de-icing system, which shows potential to lower the RCS levels associated with main rotor blade systems. This ...

    SBIR Phase II 1995 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government