You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Radiation Hardened Low Power Variable Bandwidth/Resolution Sigma Delta Converters

    SBC: MIAO IC DESIGN LLC            Topic: AF131073

    ABSTRACT: By reducing radiation through rad-hard design, device modeling and manufacture process, we at MIAO LLC technology will provide a state of art solution for 130 nm CMOS/SOI space borne, 10 MHz bandwidth with over 114 dB signal-to noise ratio (SNR) delta-sigma analog-to-digital converters at Total Ionizing Dose greater than 1 MRads. The device power consuming is estimating less than 80 mW ...

    SBIR Phase I 2014 Department of DefenseAir Force
  2. Ultra-Broadband, High Dynamic Range Receiver System

    SBC: ALPHACORE INC            Topic: N132098

    The objective of this proposal is to demonstrate the feasibility of an ultra-broadband, high dynamic range receiver system for signal capture, storage, and analysis. The significance of this innovation lies in generating significant cost savings in testing military receiver systems through stimulation via playback of high-fidelity recordings at RF frequencies. Optimization and testing can now be p ...

    SBIR Phase I 2014 Department of DefenseNavy
  3. Advanced Helo Display for Zero-Zero Shipboard Landings

    SBC: KUTTA TECHNOLOGIES, INC.            Topic: N132133

    As a primary developer of Radio Technical Commission for Aeronautics (RTCA) DO-178C applications for manned and unmanned systems, Kutta is keenly aware of human machine interface (HMI) interaction issues in fixed-wing and rotary wing platforms. For this effort Kutta proposes to develop an Advanced Landing and Display System (ALDS) for use in Degraded Visual Environments (DVE). ALDS will assist in ...

    SBIR Phase I 2014 Department of DefenseNavy
  4. High-Frequency Energy-Deposition Actuators for Effective Scramjet Control

    SBC: PHYSICS, MATERIALS, AND APPLIED MATHEMATICS RESEARCH L.L.C.            Topic: AF121191

    ABSTRACT: Hypersonic propulsion systems, such as supersonic combustion ramjets (scramjets) are generally expected to operate from Mach 3.5 up to Mach 7-8 and are designed for specific flight Mach numbers to achieve optimum performance. However, realistic flight vehicles will experience a wide range of flight conditions during a typical mission. These off-design flight conditions degrade the perfo ...

    SBIR Phase II 2014 Department of DefenseAir Force
  5. Corrosion Identification, Removal and Cleaning of Galvanic Couples in Difficult to Access Areas

    SBC: ALPHASENSE, INC.            Topic: AF131192

    In this proposal, AlphaSense, Inc. details the development of a fully integrated laser ultrasound visualization and laser ablation tool for corrosion identification, removal and cleaning. The key innovations of this proposal include the following: a) Hidden corrosion detections based on direct visualizations of the ultrasound propagation characteristics, b) Corrosion product removal using laser ab ...

    SBIR Phase I 2014 Department of DefenseAir Force
  6. Laser-scopic Approach to Identify, Remove and Clean Galvanic Couple Corrosion in Difficult to Access Areas

    SBC: PHYSICS, MATERIALS, AND APPLIED MATHEMATICS RESEARCH L.L.C.            Topic: AF131192

    The proposed effort will investigate and develop a laser-scopic tool that will provide earlier and improved capabilities for corrosion-detection, -removal, -cleaning and -repair due to galvanic couples in hard-to-access areas, without damaging the underlying substrate or adjacent features. The key focus areas include system definition, power-delivery, mitigation/elimination of splatter and debris ...

    SBIR Phase I 2014 Department of DefenseAir Force
  7. Space-based RF Emitter Detection and Localization Using Field Programmable Gate Arrays

    SBC: RINCON RESEARCH CORPORATION            Topic: AF141124

    Satellite communications are increasingly vulnerable to radio frequency (RF) jamming due to availability of satellite operations information and reduced RF equipment cost. The Air Force seeks a trade study into how a constellation of 5-kg, 10x10x30-cm CubeSats can be used to detect and geolocate RF transmitters operating in the satellite X/Ku/K/Ka/Q frequency communication bands. RRC, together wit ...

    SBIR Phase I 2014 Department of DefenseAir Force
  8. Optical System for Precision Atomic Clocks and Stable Oscillators

    SBC: N.P. PHOTONICS, INC.            Topic: AF141126

    Ultra-stable and accurate frequency and timing devices such as atomic clocks are essential for modern communication, navigation, surveillance, and missile guidance systems. There are many atomic oscillators such as neutral calcium and neutral ytterbium that produce clock signal in optical domain. However, these optical standards are expensive and not widely available. The phase stabilized frequenc ...

    SBIR Phase I 2014 Department of DefenseAir Force
  9. Portable SPR Imaging Biosensor for Pathogen Detection

    SBC: RESODYN CORPORATION            Topic: DHP13005

    Many of the currently available options for food safety testing are expensive, slow, or limited in the range of threats that can be detected. Sending samples back to testing facilities in the United States is too slow and cumbersome to effectively respond to immediate food safety issues. SPR technology has been well-developed as a tool for molecular analysis, so it is relatively mature in terms ...

    SBIR Phase I 2014 Department of DefenseDefense Health Agency
  10. Robust 2700 F MC/C Fiber Reinforced Matrices for Turbine Engines

    SBC: ADVANCED CERAMIC FIBERS, L.L.C.            Topic: N141074

    Advanced Ceramic Fibers, LLC has developed a transformational enabling fiber technology for use in UHT turbine engines - alpha silicon carbide/carbon based fibers - with capability above Navys goal of 2700 F. Our turbine engine OEM and aerospace team members are excited about the MC/C fibers for use in more robust/durable CMCs with higher temperature capability for turbine engines (TE). ACFs has e ...

    SBIR Phase I 2014 Department of DefenseNavy
US Flag An Official Website of the United States Government