List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need (RAPID)

    SBC: Trek10 Inc.            Topic: AF183005

    Legacy Air Force IT systems behind the Operational Training Infrastructure (OTI) are inhibiting warfighter readiness due to lack of interoperability and flexibility, high costs, and need for manual processes. Next generation cloud computing that focuses on cloud-native, serverless designs will enable the Air Force to embrace agility, security, scalability, and lower costs to modernize the OTI.Trek ...

    SBIR Phase II 2019 Department of DefenseAir Force
  2. Black Box RF Sat-Link for Mission Success, Risk Mitigation, and Space Debris

    SBC: NearSpace Launch            Topic: AF183005

    The proposed Phase 2 NSL Black Box is a redundant radio link connected through the $2B Globalstar commercial Sat-phone constellation and a timely AF Dual-Purpose Technology. The miniaturized and autonomous Black Box (BB) solution with its 24/7 global coverage (latency of seconds) can greatly increase performance and response, reduce risk, and help with orbital debris tracking. The Black Box techno ...

    SBIR Phase II 2019 Department of DefenseAir Force
  3. Commercial Solutions for Weather Forecasting

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF182001

    Accurate and timely weather information for situational awareness is critical to the success of Air Force missions.To date, space-borne sensors for weather forecasting primarily include visible, infrared, and microwave instruments.While visible and infrared sensors have reached a high level of maturity and performance, those operating in the microwave region of the electromagnetic spectrum continu ...

    SBIR Phase I 2019 Department of DefenseAir Force
  4. Wafer-Level Electronic-Photonic Co-Packaging

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF16AT01

    In phase II work, we will collaborate with Prof. Stefan Preble in RIT and continue to develop large scale hybrid integration and packaging techniques for key active photonic components such as lithium niobate on insulator (LNOI) modulators and modified uni-traveling (MUTC) photodiodes. We will demonstrate a low V, broadband, small footprint LNOI modulator with hybrid Si/LN or SiN/LN waveguide usin ...

    STTR Phase II 2018 Department of DefenseAir Force
  5. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT CORPORATION            Topic: A17003

    The overall goal of this project is to develop an in-process defect monitoring and correction technique for additive manufacturing (AM) of aluminum alloy to improve repeatability for geometric dimensions, material properties, and quality. In Phase I, Sentient collaborated with Johns Hopkins University Applied Physics Lab, and successfully completed all proposed tasks demonstrating two key capabili ...

    SBIR Phase II 2019 Department of DefenseArmy
  6. Secure Cockpit-to-Ground Wireless Data Transfer

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: AF183013

    This project will develop a Millimeterwave, low-power transceiver for secure, high-speed wireless data transfer between an aircraft cockpit and a ground terminal. The wireless transceiver will replace a cumbersome, unreliable data cable that is currently used for cockpit-to-ground communications. The transciver will be small enough to plug directly into the ports of the cockpit computer and ground ...

    SBIR Phase I 2019 Department of DefenseAir Force
  7. Lightweight Replacement for AM-2 Runway Matting

    SBC: INDIANA TOOL & MFG. CO., INC.            Topic: AF183015

    This project seeks to develop a PXCM (Phase Transforming Cellular Matrix) based runway matting that serves as a superior alternative to AM-2 matting.The results will demonstrate the feasibility of PXCM based matting technology weighing 3.5 lb/sq ft or lessis capable of being laid by hand over a level surface compacted to CBR 50, of containing debris and support flight operations for 5,000 landing- ...

    SBIR Phase I 2019 Department of DefenseAir Force
  8. Reduced Cavitation, High Efficiency Outboard Propulsors for Small Planing Craft

    SBC: CANDENT TECHNOLOGIES INCORPORATED            Topic: N17AT019

    The Candent Technologies Reduced Cavitation, High Efficiency Outboard Propulsor for Small Planing Craft Phase II program is structured to develop an advanced waterjet propulsor for the Combat Rubber Raiding Craft (CRRC). This new axial flow waterjet propulsion system is designed as a bolt on assembly that replaces the lower unit of the existing MFE 55 outboard motor. This new propulsion system inc ...

    STTR Phase II 2018 Department of DefenseNavy
  9. Novel Engine Cycles for Upper Stage Liquid Rocket Engines

    SBC: IN SPACE, L.L.C.            Topic: AF182060

    The performance of upper stage rocket systems that employ deflagration combustion processes has peaked with systems exceeding 98% efficiency.Rotating detonation engine technology offers the potential to improve performance of these systems via combustion of the propellants at higher pressures attained by exposure to a detonation wave traversing the annular combustor at speeds in excess of 2000 m/s ...

    SBIR Phase I 2019 Department of DefenseAir Force
  10. Generator Power Recapture

    SBC: P C KRAUSE AND ASSOCIATES INC            Topic: AF161008

    The Air Force rebuilds and tests many aircraft and ground-power generators each year, involving many hours of loaded run-time with dissipative load banks. To improve facility energy efficiency and to have a positive environmental impact, a regenerative ac/dc load bank is proposed to push power from generator testing back to the electric grid. The proposed generator power recapture unit (GPRU) will ...

    SBIR Phase II 2018 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government