You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Active Thermal Control System Optimization

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: N152115

    The primary objectives of this effort will be the development, validation, and deployment of a software toolset capable of modeling dynamic two-phase flow systems for controls development and optimization. The toolset will be comprised of a variety of components related to two-phase flow systems with user interfaces to parameterize the component models and a variety of supporting tools for operati ...

    SBIR Phase II 2017 Department of DefenseNavy
  2. Ad-Hoc Ground Based Counter-Fire System

    SBC: HYPERION TECHNOLOGY GROUP INC            Topic: N142086

    This proposal addresses the development of a Command Post and Acoustic Listening Posts for performing detection and automatic geo-location and classification of transient acoustic sounds associated with the firing of weapons, especially rockets, mortars, and artillery and the corresponding munitions impacts. Key components of the system are rugged low-noise infrasound sensors, state-of-the-art aco ...

    SBIR Phase II 2017 Department of DefenseNavy
  3. Advanced Engine Durability Systems for Unmanned Aerial Vehicle Propulsion

    SBC: IBC Materials & Technologies, LLC            Topic: SOCOM163002

    UAV engines have a mean time between overhauls of about 400-500 hours, after which the engine is torn down for inspection. One of the primary findings during this overhaul is the presence of abundant carbon deposits in the engines and the combustion areas. There are a number of issues caused by carbon build up. When large carbon deposits are formed, they reduce the smooth air flow which can res ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  4. Advanced Fast Shutter for Debris Mitigation

    SBC: HYPERION TECHNOLOGY GROUP INC            Topic: DTRA143007

    In an effort to development more robust optical system coatings DTRA, in collaboration with Sandia National Labs, is working to characterize the degradation of optical materials for space systems when exposed to high intensely EUV/ cold x-rays. The experiments utilizes the Double Eagle z-pinch facility which generates high current, high voltage arc pinch plasma to produce an intense EUV and cold x ...

    SBIR Phase II 2017 Department of DefenseDefense Threat Reduction Agency
  5. Advanced Manufacturing Technologies

    SBC: SENTIENT SCIENCE CORPORATION            Topic: DLA152001

    In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Advanced RIIC Technology to Increase Density and Efficiency of IRLED Arrays (ART-IDEA)

    SBC: Chip Design Systems Inc.            Topic: AF171015

    We propose to study how extraction efficiency can be improved by reducing IRLED pixel pitch. Our approach is to scale the size of RIIC pixel and IRLED device from 24-microns down to 12-microns and to lower the IRLED drive voltage from 10 Volts to 5 Volts.

    SBIR Phase I 2017 Department of DefenseAir Force
  7. Affordable, Fast-Tunable, Notch Filters at X-Band and Higher Frequencies

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: N171074

    Indiana Microelectronics is proposing to conduct a feasibility study to two types of affordable, high speed, tunable notch filters in the X-Band and above. The first technology is based upon substrate integrated resonators tuned with solid state varactors. This type of filter technology is anticipated to produce a moderate quality factor while maintaining sub-microsecond tuning speeds. The second ...

    SBIR Phase I 2017 Department of DefenseNavy
  8. Aircraft Electrical Power System Diagnostics and Health Management

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: N06T007

    The main focus of the proposed SBIR Phase II effort is the expansion of the EPIDS diagnostic and prognostic monitoring capability to the V-22 constant frequency generators. The design of the EPIDS for the variable frequency generators will be leveraged and modified with additional sensors and updated with diagnostics algorithms specific to the CFG. PCKA plans to test the CFG EPIDS in a laboratory ...

    SBIR Phase II 2017 Department of DefenseNavy
  9. Aircrew-Mounted Self-Adjusting Tether System

    SBC: WOLF TECHNICAL SERVICES INC            Topic: N171026

    Wolf is developing an aircrew-mounted helicopter restraint system for mobile aircrew that prevents ejection from the aircraft and provides crash and fall protection. It attaches to any D-ring currently used to attach the gunner's belt, and requires no modification to the aircraft to use. It automatically manages the slack between the aircrew and the attachment point. It senses motion associated wi ...

    SBIR Phase I 2017 Department of DefenseNavy
  10. A Novel, Low Cost and Handheld Metal Sorting Sensor for Chemical Cleaning and Stripping Process

    SBC: ALPHASENSE, INC.            Topic: AF161009

    ABSTRACT: After a certain amount of service time, many aircraft components need to be cleaned and the coatings on those parts need to be stripped. Prior to the chemical cleaning and stripping processes, those parts are routinely examined by inspectors to locate the part numbers and find their matches on a list. Such a visual inspection process is not only time consuming, but also prone to human er ...

    SBIR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government