You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Separation Technologies for Extraction of Rare Earth Elements (REE)

    SBC: SPECTRUM MAGNETICS LLC            Topic: OSD12T01

    The proposed SBIR Phase I program is to develop a novel nanobulb flotation method with high efficiency and rare earth mineral recovery rate comparing to conventional methods. Significant efforts will focus on the studies of fundamental surface chemistry o

    STTR Phase I 2013 Department of DefenseNavy
  2. Advanced Spectrally Selective Materials for Obscurant Applications

    SBC: LUMILANT, INC.            Topic: A13AT016

    As infrared (IR) electo-optical sensors improve in both availability and quality a strong need exists to have comparable improvements in the performance of military obscurants within the IR band. Conventional approaches for creating effective IR obscurants have relied primarily on shaped metal particles with high aspect ratios (e.g. rods, flakes). While efficient it is difficult to create very ...

    STTR Phase I 2013 Department of DefenseArmy
  3. A Flexible and Extensible Solution to Incorporating New RF Devices and Capabilities into EW/ ISR Networks

    SBC: Adaptive Micro-Ware Inc.            Topic: ST13A004

    There are many different RF devices used in military networks. It is highly desirable to have scalable networks, where new devices can be readily installed without hardware or software changes elsewhere in the network. It is known that achieving this goal

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  4. A Noninvasive Sensor/Control Suite for Health Monitoring and Extended Life of Aircraft Generation Systems

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: N06T007

    Failures in aircraft electrical power systems can compromise the readiness, safety, and capabilities of the war-fighter. Furthermore, if the root cause for the failure cannot be quickly identified, this can lead to increased maintenance costs and potential downtime for the aircraft. In this effort, enhanced diagnostic and prognostic algorithms will be implemented in a hardware unit to minimize suc ...

    STTR Phase II 2013 Department of DefenseNavy
  5. Closed Loop Frequency Control for Tunable High Quality Factor Filters

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: SB12A005

    The proposed project will focus on the development of closed loop frequency control hardware and algorithms for control of high quality factor tunable microwave filters based upon evanescent mode resonators. The developed controller will be integrated with a representative filter. As a system demonstration, the integrated filter/controller module will then be applied to a next generation frequency ...

    STTR Phase II 2013 Department of DefenseDefense Advanced Research Projects Agency
  6. High-Throughput Brain Injury Proteomic Microassay

    SBC: ANP TECHNOLOGIES INC.            Topic: OSD05T003

    We propose to develop a multiplexed immunoassay for the detection of 2 - 4 medically relevant biomarkers of traumatic brain injury for use by front-line medical personnel and their civilian equivalents. The assay will provide results in less than 30 minutes, and provide information as to the actual level (concentration) of the biomarkers in the patient. The sample size for operating the assay is ...

    STTR Phase I 2005 Department of DefenseArmy
  7. Low Drag, Underwater Acoustic Source for Sea surface-based Mine Sweeping

    SBC: LewTech Company, Inc.            Topic: N05T029

    The U.S. Navy desires the use of Unmanned Surface Vessels in littoral water regions for the mission of Mine Counter Measures. In particular, the use of the standard Navy Rigid Hull Inflatable Boats (RHIBs) for such a mission is desirable to decrease dependence on traditional, high operating cost assets, increase mission endurance and maneuverability and the removal of personnel from harm's way. ...

    STTR Phase I 2005 Department of DefenseNavy
  8. Miniaturized, Power Efficient C-band Telemetry

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: AF12BT07

    ABSTRACT: The program will focus on the design and development of a compact, high efficiency C-Band telemetry transmitter. The transmitter will be capable of transmitting in three separate sub-bands. The user will be able to select the band of operation as well as the desired ARTM waveform. LTCC will be utilized with susbsrate integrated components and filters to produce a compact system design. ...

    STTR Phase I 2013 Department of DefenseAir Force
  9. Modeling of Integrally Bladed Rotor (IBR) Blends

    SBC: Optimal Solutions Software, LLC            Topic: N13AT002

    The overall goal of this Phase I project is to show the feasibility of using state-of-the-art parameterization tools for shape changes (i.e., volumetric deformation/morphing provided by Sculptor) coupled with a fast FEA tool (i.e., the MAX method) to quickly calculate the dynamic response of the many different shapes necessary for sample-based stochastic vibration analysis of IBRs with blends. The ...

    STTR Phase I 2013 Department of DefenseNavy
  10. Modeling to Quantify Improved Durability of Superfinish Gear Processing

    SBC: SENTIENT SCIENCE CORPORATION            Topic: N11AT007

    Under this STTR, Sentient Corporation, along with the Ohio State University GearLab as a research partner, will develop a probabilistic physics-based damage modeling tool for the simulation of superfinished gear components. This model will consider critical surface, material, and load parameters for components manufactured from common gear steels. The model will also analyze superfinished as well ...

    STTR Phase II 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government