List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Zinc Oxide Based Photonics Devices

    SBC: MOXTRONICS, INC.            Topic: N03113

    The program goal is to develop UV to visible light emitting diodes based on ZnO and its alloys. The target devices are one one that will emit in the UV (300 nm) and one that will emit in the violet (400 nm), each with power greater than 5 mW. Recent data indicate ZnO-based photonic devices such as light emitting diodes (LEDs) and laser diodes (LDs) that use arsenic doped p-type material will have ...

    SBIR Phase II 2004 Department of DefenseNavy
  2. Zinc Oxide Based Photonics Devices

    SBC: MOXTRONICS, INC.            Topic: N/A

    Recent experimental data indicate ZnO-based photonics devices such as light emitting diodes (LEDs) and laser diodes (LDs) that use arsenic doped p-type ZnO would have technical and operational advantages to those based on GaN. Principal advantages includeease of film growth at lower cost, larger exciton binding energy to give higher brightness in emisson and sensitivity in detection, the availabil ...

    SBIR Phase I 2003 Department of DefenseNavy
  3. Zero VOC Coatings for Aircraft Grade Aluminum Alloys

    SBC: RESODYN CORPORATION            Topic: AF071110

    The Air Force is actively pursuing a reduction and eventual elimination of the volume of volatile organic compound (VOC) emissions generated during aircraft coating operations. Resodyn Corporation proposes the development of the zero VOC (ZCOV) coating system that consists of thermally applied engineered thermoplastics. The enabling technology will be Resodyn Corporation’s Low Temperature Powd ...

    SBIR Phase I 2007 Department of DefenseAir Force
  4. Winning the 'Race to the Bottom' by Changing the Rules: Inhibiting Malicious Hardware Activation through Attack Incompatibility

    SBC: Galois, Inc.            Topic: OSD10IA1

    Many hardware trojans depend on (a) the ability of an attacker to have an accurate model of the target system and of key software used on that system and (b) identification of one or more deterministic trigger conditions with low observability (i.e., conditions that evade detection by traditional scan- or ATPG-based testing methodologies but that can be exercised on demand via external stimuli). ...

    SBIR Phase I 2010 Department of DefenseAir Force
  5. Winning the 'Race to the Bottom' by Changing the Rules: Inhibiting Malicious Hardware Activation through Attack Incompatibility

    SBC: Galois, Inc.            Topic: OSD10IA1

    Many hardware trojans depend on (a) the ability of an attacker to have an accurate model of the target system and of key software used on that system and (b) identification of one or more deterministic trigger conditions with low observability (i.e., conditions that evade detection by traditional scan- or ATPG-based testing methodologies but that can be exercised on demand via external stimuli). ...

    SBIR Phase II 2012 Department of DefenseAir Force
  6. Wide Spectral Response Nanocrystal-Sensitized Focal Plane Array

    SBC: VOXTEL, INC.            Topic: AF121019

    ABSTRACT: The printed nanocrystal detector technology will enable low cost, wide-spectral-response imagers. Phase I will use high volume synthesis methods where nanocrystal films will be fabricated and characterized. Solution processing allows nanocrystal films to be deposited or printed directly onto ROICs, so that high resolution (e.g.

    SBIR Phase I 2012 Department of Defense
  7. Wide Spectral Response Nanocrystal-Sensitized Focal Plane Array

    SBC: VOXTEL, INC.            Topic: AF121019

    ABSTRACT: A compact night vision imaging technology will be developed that responds in the visible through the short-wavelength infrared (SWIR) and medium-wavelength infrared (MWIR) spectral range from 0.4 to 5µm wavelengths. The detectors are made using low cost deposition techniques, at atmosphere, using CMOS readout integrated circuits (ROICs). The imager does not require bump bond hybridizat ...

    SBIR Phase II 2013 Department of Defense
  8. WHOLE BODY SURFACE SCANNER FOR DESIGN OF PROTECTIVE EQUIPMENT

    SBC: Rose Imaging            Topic: N/A

    We propose to design, implement and test the feasibility of a full body surface digitizing system to be used for anthropometric studies and design of protective equipment. Resolution, speed, coverage and accuracy of three dimensional (3D) optical surface scanning will be defined. A generic whole body scanner will be designed, and a software simulation system will be implemented and used to test th ...

    SBIR Phase II 1994 Department of DefenseAir Force
  9. WHOLE BODY SURFACE SCANNER FOR DESIGN OF PROTECTIVE EQUIPMENT

    SBC: Rose Imaging            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force
  10. Wet-Vacuum Sampler For Surface Biocontamination Detection

    SBC: ROCKY MOUNTAIN RESOURCE LABS, INC.            Topic: N/A

    In response to possible biological warfare (BW) attack, accurate sample acquisition and rapid detection of point microbial contamination on military equipment, housing and supplies is required for personnel safety and early response strategies. A novelhand-held, wet-vacuum sampling unit (VSU) is proposed, which will allow application of sterile rinse solutions onto diverse material surfaces or te ...

    SBIR Phase I 2001 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government