You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. 6000297

    SBC: Chip Design Systems LLC            Topic: AF18AT017

    We propose to develop an innovative concept of the high speed dynamic IRSP that combines components and devices from proven suppliers with novel system-level research topics from CDS and University of Delaware. Having previously built and delivered working LED IRSPs to users gives CDS a unique advantage. In line with system theme of the solicitation, our phase 1 research topics are focused on syst ...

    STTR Phase I 2018 Department of DefenseAir Force
  2. ABL (Airborne Laser) Detection Sensor Improvements

    SBC: VOXTEL, INC.            Topic: MDA06054

    Recent and emerging technologies, such as a 3-D LADAR tracker with precise target detection, tracking, and aimpoint imaging could make significant gains for ABL’s capabilities. Solid state avalanche photodiodes (APDs) are a rugged, fully-monolithic detector technology well suited for LADAR focal plane arrays (FPAs). In the past, Geiger mode APD operation has been preferred for tasks requiring se ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  3. ABL (Airborne Laser) Detection Sensor Improvements

    SBC: VOXTEL, INC.            Topic: MDA06054

    To provide the Airborne Laser (ABL) precision ranging and 3-D track refinement capability for the next generation active ranging system (NGARS), Voxtel will develop an avalanche photodiode (APD) receiver. Unlike the original ARS, which uses a 10.6 µm CO2 laser, Voxtel’s InGaAs-based ARS receiver is designed for high-speed photon counting between 1.0 – 1.6 µm. Operation in the short-wave infr ...

    SBIR Phase II 2008 Department of DefenseMissile Defense Agency
  4. Abrasion and Impact Resistant Hydrophobic Thermoplastic Coatings for Aircraft Landing Skis/Skids

    SBC: RESODYN CORPORATION            Topic: AF103256

    ABSTRACT: The current polyurethane based coatings on the landing skis/skids of US Air Force aircraft require frequent maintenance due to exposure to extreme conditions. A long-lasting, low-friction, hydrophobic, impact and abrasion resistant coating on the landing ski/skids is highly desired to ensure the ski/skid equipped aircraft can continue to meet their unique mission requirement. Resodyn Co ...

    SBIR Phase I 2012 Department of DefenseAir Force
  5. Abrasion and Impact Resistant Hydrophobic Thermoplastic Coatings for Aircraft Landing Skis/Skids

    SBC: RESODYN CORPORATION            Topic: AF103256

    ABSTRACT: Resodyn Corporations proposed Functionalized Polyethylene (FPE) copolymer thermoplastic coating will overcome the shortcomings of the current ski coating. The FPE will provide the long-lasting, low friction, impact-resistant, abrasion resistant and hydrophobic properties required and will also provide hydraulic fluid resistance and reduced drag during wet snow conditions. Enhancements ...

    SBIR Phase II 2013 Department of DefenseAir Force
  6. Absorbable Gels for Modulated Bioavailability of Vaccines

    SBC: POLY-MED, INC.            Topic: N/A

    Growing interest in vaccination and diversity of new vaccines which can be administered as a single dose for timely response and prolonged immunity evoked use of absorbable polymers for developing controlled delivery systems. Although absorbable microspheres were explored for controlled delivery of vaccines, poor reproducibility of these systems created a need for a unique single-shot vaccine for ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
  8. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase II 2003 Department of DefenseOffice of the Secretary of Defense
  9. A CAD Tool for Rapid analysis of Repairs

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N06005

    The objective of this project is to develop and validate a CAD tool for the rapid design of mechanically fastened repairs, bonded repairs, and hybrid repairs involving both adhesive bonding and mechanical fasteners. To allow use by non-specialists, the CAD tool will replace the current process of manual construction of joint finite element models with CAD tinker toy assembly using parametric par ...

    SBIR Phase I 2006 Department of DefenseNavy
  10. A CAD Tool for Virtual Laser Shock Peening of Rotorcraft Components

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: A05063

    The objective of this project is to develop a test-validated CAD tool for performing virtual laser shock peening(LSP) simulations of rotorcraft components. Virtual LSP peening can be used, in conjunction with virtual fatigue testing, to conduct simulations to assess the effects of variations in process parameters, i.e., laser beam power density and size, number of layers, and the overlay pattern ...

    SBIR Phase I 2005 Department of DefenseArmy
US Flag An Official Website of the United States Government