List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Fault-to-Failure Progression Modeling of Propulsion System and Drive Train Bearings for Prognostic and Useful Performance Life Remaining Predictions

    SBC: SENTIENT CORPORATION            Topic: N02195

    Military and commercial aircraft operators are moving toward predictive maintenance to minimize costs while maximizing asset availability and safety. Key technological prerequisites for this new approach are the ability to monitor the condition of critical components, and the ability to accurately forecast their remaining useful life. Phase I of this project clearly demonstrated the feasibility of ...

    SBIR Phase II 2004 Department of DefenseNavy
  2. Carbon Foam Composite Tooling

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: MDA03049

    Touchstone Research Laboratory has developed a novel material, CFOAMr. The primary enabling carbon foam characteristic is that the Coefficient of Thermal Expansion (CTE) values are comparable to carbon fiber polymer matrix systems in manufacturing advanced composites. Other advantages of carbon foam-based tools are low mass, reduced energy, easy modifications, unmatched repair capabilities, and r ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  3. Advanced Divert and Attitude Control System Materials for Liquid/Gel DACS Systems

    SBC: Fiber Materials, Inc.            Topic: MDA03087

    Fiber Materials, Inc., teamed with Aerojet and Plasma Processes, Inc., will complete the design and development leading to fabrication and demonstration of a ceramic matrix composite thrust chamber and requisite joining technologies for an advanced liquid/gel divert and attitude control (LDACS) application. The proposed Phase II development program will utilize a non-eroding material based on carb ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  4. Coal-Based Porous Graphite for Aerospace Heat Exchanger Applications

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: AF03118

    A newly developed "coal-based" porous graphite material has been recently produced. This development is a direct result of Touchstone Research Laboratory's Phase I funding to develop enhanced-strength carbon foam heat-exchanger materials for aerospace applications since low density carbon foams cannot endure high bleed air pressures in aerospace pre-coolers and heat exchangers. The newly develope ...

    SBIR Phase II 2004 Department of DefenseAir Force
  5. Improved Life Prediction of Turbine Engine Components

    SBC: PEREGRINE CONSULTING, INC.            Topic: AF03112

    The purpose of the proposed Phase II research is to develop a prototype of the TFLAMES core software model. This model and attendant sub-routines will make it possible to calculate the stress and life of each individual engine component using actual flight data in near-real time, replacing the current method of using analysis of generic missions and bookkeeping Total Accumulated Cycles (TAC). In ...

    SBIR Phase II 2004 Department of DefenseAir Force
  6. Optimal Bioaerosol Sampler

    SBC: MANNING APPLIED TECHNOLOGY            Topic: ARMY03T20

    Development of an Optimal Bioaerosol Sampler with enhanced optical triggering capability is proposed, following a highly successful Phase I effort that clearly demonstrated feasibility. The threat of a bioaerosol attack can be partially mitigated by deployment of a cost-effective sensor network. High priority programs, such as BioWatch and Portal Shield will benefit from a sensor compliant to Join ...

    STTR Phase II 2004 Department of DefenseArmy
  7. Future Technology for Aerospace Structures Technology

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: AF03237

    The continued development of hypersonic vehicles and high performance space access vehicles has highlighted the importance of light-weight, load-bearing structures capable of prolonged exposure at elevated temperatures. The optimal solution to this problem would be a hot primary structure capable of supporting the required loads at elevated temperature while also providing the necessary thermal pr ...

    SBIR Phase II 2004 Department of DefenseAir Force
  8. Development and Validation of a Hybrid Sensor Module for Real-Time Monitoring in Material Breakthrough Applications

    SBC: Sensor Research And Development Corporation            Topic: CBD02202

    SRD is proposing to develop a next-generation chemical permeation hybrid sensor module based on a semiconducting metal oxide (SMO) and polymer-coated surface acoustic wave (P-SAW) sensor array for real-time permeation testing of chemical agent protective

    SBIR Phase II 2004 Department of DefenseOffice for Chemical and Biological Defense
  9. Advanced Divert and Attitude Control Materials, Attitude Control System (ACS) Thruster Body Application

    SBC: Fiber Materials, Inc.            Topic: MDA03087

    Fiber Materials, Inc. (FMI), teamed with Aerojet, proposes to demonstrate a low cost material concept applicable to the SM-3 ACS. The material, a 4-dimensionally reinforced carbon-carbon containing silicon carbide to eliminate oxidation and erosion, will offer significant benefits in comparison to the refractory metals now in use such as rhenium, columbium, and molybdenum. Refractory and other m ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  10. Weather Extension for a Commercial Geographic Information System

    SBC: PROLOGIC, INC.            Topic: AF03094

    This SBIR Phase II project will develop a new technology that provides 2D/3D/4D visualization of weather information within a commercial GIS (Geographic Information System) environment. GIS systems provide rich support for mapping, geographic data handling, spatial query, and geographic analysis functionality, but do not include native support for weather. GIS systems typically use static (atemp ...

    SBIR Phase II 2004 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government