You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A 3D Printed Head Phantom for Transcranial Direct Current Stimulation Current Model Validation

    SBC: ALPHASENSE, INC.            Topic: AF151026

    ABSTRACT:Cognitive skills/capabilities are important for the military personnel to fulfill tasks and to ensure mission efficiency and success. In the past decade, there are abundant researches suggesting that non-invasive brain stimulation via transcranial direct current stimulation (tDCS) holds great promise to enhance a soldier's cognitive performances. Although models to predict the tDCS curren ...

    SBIR Phase I 2015 Department of DefenseAir Force
  2. Advanced High Mass Fraction Tactical Rocket Motor Case

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: AF04199

    The maturation of Titanium Matrix Composite into an affordable material system with production experience on the F-16 opens up a wide series of opportunities for improved propulsion performance. This SBIR builds on the baseline TMC demonstrations being conducted by FMW and ATK and extends them to advanced systems. The use of configured residual stress states and enhanced Titanium matrix systems ...

    SBIR Phase I 2004 Department of DefenseAir Force
  3. Advanced Manufacturing Technologies

    SBC: Stutz Applied Technology, Inc.            Topic: DLA152001

    A method of utilizing 3D printed molds to produce low cost metal parts for obsolescence, engineering development prototypes, and low rate production is proposed for development and evaluation.This method is capable of producing parts of similar quality to mass production techniques such as green sand and lost wax casting at a fraction of the setup costs for those methods.

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  4. Advanced Manufacturing Technologies

    SBC: SENTIENT SCIENCE CORPORATION            Topic: DLA152001

    In response to Defense Logistics Agencys SBIR for Advanced Manufacturing Technologies, Sentient proposes to develop a life-cycle cost optimization tool based on its DigitalClone-ComponentTM (DCC) modeling technology.This tool will enable users to better understand the tradeoffs between manufacturing cost and performance/durability of the resultant components. This is particularly attractive for lo ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  5. Advanced Rocket Propulsion Technologies

    SBC: FMW COMPOSITE SYSTEMS, INC.            Topic: AF04199

    The future propulsion requirements of the USAF will require substantial performance improvements, especially stage mass fraction as defined by the Phase III IHPRPT goals. The development and transition to production of titanium matrix composites (TMC) offer the potential of significant mass fraction gains for liquid engines. This program proposes the substitution of TMC into the impeller, which ...

    SBIR Phase I 2004 Department of DefenseAir Force
  6. Advanced Solid Rocket Motor Technology for Tactical Missiles

    SBC: KNOBLEY TECHNICAL ASSOCIATES, LLC            Topic: AF112102

    ABSTRACT:Knobley Technical Associates Phase Il Advanced Solid Rocket Motor Technologies for Tactical Missiles program includes design, analysis, development and testing efforts to define and mitigate technical and operational challengesto be investigated and resolved for successful maturation ofthe performance enhancing burn-rate augment highly loaded propellant grain technology for next generatio ...

    SBIR Phase II 2015 Department of DefenseAir Force
  7. A Novel, Low Cost and Handheld Microwave Sensor for the Detection and Evaluation of Incipient Composite Heat Damage

    SBC: ALPHASENSE, INC.            Topic: N131013

    Due to their high specific strength and light weight properties, polymer matrix composites (PMCs) are increasingly used in a wide variety of military and civilian aircrafts. The mechanical strength of PMCs can be dramatically compromised when such materials are exposed to various heat sources during operation and maintenance. It has been shown that PMCs can lose up to 80% of their mechanical stren ...

    SBIR Phase II 2015 Department of DefenseNavy
  8. Aspect-Oriented Secure Fuselet Runtime Environment

    SBC: ORIELLE, LLC            Topic: MDA04044

    We propose to develop a secure runtime environment for fuselet-based missile targeting and threat analysis built on a foundation of aspect-oriented secure web services. Aspect-oriented techniques enable the modularization of crosscutting concerns such as remote access, security, transactions, and monitoring. We will compose aspect-oriented instrumentation with distributed object technologies in a ...

    SBIR Phase I 2004 Department of DefenseMissile Defense Agency
  9. Carbon Foam Composite Tooling

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: MDA03049

    Touchstone Research Laboratory has developed a novel material, CFOAMr. The primary enabling carbon foam characteristic is that the Coefficient of Thermal Expansion (CTE) values are comparable to carbon fiber polymer matrix systems in manufacturing advanced composites. Other advantages of carbon foam-based tools are low mass, reduced energy, easy modifications, unmatched repair capabilities, and r ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  10. Carbon Foam Innovative Processing

    SBC: TOUCHSTONE RESEARCH LABORATORY, LTD.            Topic: MDA02021b

    Touchstone Research Laboratory is currently producing carbon foam in its pilot production facility. In the Phase I feasibility study, Touchstone identified opportunities to reduce the production cycle by combining manufacturing processes. The results indicated that a batch foaming process was optimum and the heat treatment step should be converted to a continuous process. This would lead to a s ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government