Award Data

Many large-scale numerical simulations can be broken down into common mathematical routines. While the applications may differ, they often need to perform standard functions such as system solves, Fourier transforms, or eigenvalue calculations. Consequently, producing fast, efficient implementations of these methods will benefit a broad range of Air Force applications. Graphics Processing Units (G ...

In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

The global war on terror has dramatically changed the environment in which today's warfighter operates. Many of the locations in theater require moving troops and equipment into areas with unimproved landing zones. Loss of situational awareness in degraded visual environments is one of the largest threats to rotary wing aircraft operating in these areas. Phase Sensitive Innovations has built a pas ...

The maturation of Titanium Matrix Composite into an affordable material system with production experience on the F-16 opens up a wide series of opportunities for improved propulsion performance. This SBIR builds on the baseline TMC demonstrations being conducted by FMW and ATK and extends them to advanced systems. The use of configured residual stress states and enhanced Titanium matrix systems ...

ABSTRACT: We propose to build Infrared LED (IRLED) scene projectors that are able to project larger than 1k by 1k imagery with maximum temperatures of 3000K, frame rates in excess of 400 Hz, and emission wavelength between 3 and 5 microns. Our team consists of experienced IRLED fabrication experts, RIIC designers, and packaging specialists.; BENEFIT: Infrared LED (IRLED) arrays represent a potenti ...

The future propulsion requirements of the USAF will require substantial performance improvements, especially stage mass fraction as defined by the Phase III IHPRPT goals. The development and transition to production of titanium matrix composites (TMC) offer the potential of significant mass fraction gains for liquid engines. This program proposes the substitution of TMC into the impeller, which ...

Plasmonic metamaterials, composed of patterned metallic and dielectrics, can be engineered to have interesting optical properties that are attractive for a range of advanced obscurant applications. These particles are typically fabricated on planar surfaces, since patterning planar surfaces to achieve the desired effects is relatively straightforward.However, for planar geometries the particles op ...

Under the DARPA sponsored Naval Advanced Amorphous Coating (NAAC) program, a novel, thermal sprayed amorphous metal coating has been developed. Such a coating has demonstrated superior mechanical and corrosion resistance properties. Although the coating is designed to be life-of-ship, the application and operational conditions may compromise the integrity of the coating. For example, the applicati ...

Thermal barrier coatings have been widely used to provide thermal protection to superalloy components in gas turbine engines. After certain amount of service time, the coating experiences a reduction in thickness by processes such as wear, erosion and foreign/domestic object damage. When the thickness decreases below a critical value, the thermal barrier effect provided by the coating is no longer ...

ABSTRACT: Casting parts with intricate internal surfaces are routinely used in many gun systems. It is important to inspect those casting parts to ensure the inner structures comply with the original design during the first article testing and production lot certification. Currently, inspections of inner surfaces are often done with borescopes, which is time consuming, labor intensive, and costly. ...