Award Data

ABSTRACT: High-performance computing (HPC) programmers and domain experts, such as those in the Air Force's research divisions, develop solvers for a wide variety of application areas such as modeling next generation aircraft and weapons designs and advanced image processing analysis. When developing software for HPC systems, the programmer should not spend the majority of their time optimiz ...

In this SBIR program, AlphaSense, Inc. teamed with the Center for Non-destructive Evaluations at Iowa State University to develop a compact, low cost handheld sensor for non-destructive material case depth verification. In phase I, we have proven the feasibility of using an alternating current potential drop (ACPD) sensor for non-destructive measurements of case depth. Phase II will be focusing on ...

ACTIVATED STEEL FOIL FABRICATED INTO ELEMENTS TO BE PACKAGED AS EXPENDABLE DECOYS HAS SHOWN GOOD PERFORMANCE IN LOW IR SIGNATURE APPLICATIONS. THE PRESENT BATCH PRODUCTION PROCESS FOR THESE FOILS ENTAILS, IN PART, TWENTY HOURS OF FURNACE TREATMENT. A COMBINATION OF NINE SEPARATE OPERATIONS, LOW PRODUCTION RATES AND HIGH LABOR COSTS YIELDS A UNIT MANUFACTURING COST OF MORE THAN $250.00. WE PROPOSE ...

The maturation of Titanium Matrix Composite into an affordable material system with production experience on the F-16 opens up a wide series of opportunities for improved propulsion performance. This SBIR builds on the baseline TMC demonstrations being conducted by FMW and ATK and extends them to advanced systems. The use of configured residual stress states and enhanced Titanium matrix systems ...

The future propulsion requirements of the USAF will require substantial performance improvements, especially stage mass fraction as defined by the Phase III IHPRPT goals. The development and transition to production of titanium matrix composites (TMC) offer the potential of significant mass fraction gains for liquid engines. This program proposes the substitution of TMC into the impeller, which ...

Gearbox seal wear and leakage is a major source of maintenance and downtime for rotorcraft. Sentient will use our advanced tribology modeling technology to evaluate coatings and surface texturing processes for carbon face seals and provide a generalized modeling approach that can replace physical testing of seals. These models will be used to evaluate several rotorcraft seal designs proposed by ou ...

ABSTRACT: Knobley Technical Associates Phase I Advanced Solid Rocket Motor Technology for Tactical Missiles program is planned to identify and evaluate technology advancing weight and risk reducing processes, component designs and increased energy reduced signature propellant systems for the rate augmented highly loaded dual pulse tactical propulsion system. The proposed program is planned to bui ...

Although biodiesels have been increasingly used in automobiles, trains, commercial aircrafts and heating systems, they are not currently used in the military aircrafts and land vehicles because they typically do not meet the JP-8 performance criteria as specified by MIL-PRF-83133E. Unintentional contaminations by the biodiesels into the jet fuels can introduce adverse effects, including engine ope ...

INCREASES IN SOLAR CELL EFFICIENCY CAN BE ACHIEVED WITH TANDEM MULTI-JUNCTION STRUCTURES TO IMPROVE THE PERFORMANCE AND SCALE OF SPACE PHOTOVOLTAIC CONCENTRATORS. THE "TOP SOLAR CELL" TANDEM APPROACH COULD INCREASE ENERGY CONVERSION EFFICIENCY BY AS MUCH AS 100%. A SELF-SUPPORTING ALUMINUM-GALLIUM-ARSENIDE (ALGAAS) TOP SOLAR CELL IS BEING DEVELOPED FOR MECHANICAL ATTACHMENT TO A SILICON CONCENTRAT ...

DEVELOPMENT OF AN AMPLIFYING CHEMICAL AGENT DETECTOR, INCORPORATING A MODULAR APPROACH TO SENSING OF NERVE AGENTS AND OTHER CHEMICALS OF MILITARY INTEREST, IS PROPOSED. THE THREE MODULES: (1) A DYNAMIC TRIGGER WHICH RESPONDS TO THE CHEMICAL AGENT OF INTEREST; (2) A BIOAMPLIFIER WHICH CONTAINS THE CENTRAL SWITCH AND WHICH PROVIDES AN INITIAL AMPLIFICATION STAGE; AND (3) AN ELECTROCHEMICAL TRANSDUCE ...