You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Avionics Support for Ground Based Munitions Testing

    SBC: Wintec, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force
  2. Advanced Cooling System for High Power Solid State Lasers

    SBC: RINI TECHNOLOGIES, INC.            Topic: N/A

    Through the Phase I SBIR process, Rini Technologies Inc. has demonstrated the feasibility of using evaporative spray cooling to reduce the temperature of high power laser diode stacks below the temperature at which they currently operate. This reductionin temperature, while operating at high power, results in increased laser efficiency, extended lifetime and reliability, as well as the ability to ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  3. ADVANCED SIGNAL WAVEFORM CLASSIFIER

    SBC: Photonic Systems, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseNavy
  4. Advanced Technology for Real-Time Image Generation

    SBC: ACUSOFT, INC.            Topic: N/A

    In this SBIR, AcuSoft will research and develop advanced, real-time PC Image Generation technology, as well as develop tools and integrate the required capabilities using PC image generators. The resultant products will provide to the DOD M&S communitythe advanced real-time image generation technology that will enable the use of lower-cost PC graphics in military virtual simulation. In our PHASE ...

    SBIR Phase I 2001 Department of DefenseArmy
  5. Advanced Testing of Safe-Solvent Replacements for CFC-113 For Use in Cleaning of Oxygen Systems

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N/A

    The objective of this Phase II research is to perform advanced testing of second-generation solvent replacements used for cleaning hydrocarbon and fluorocarbon residues from oxygen systems. The advanced testing includes determining flammability,autogenous ignition temperature in oxygen, atmospheric impact, toxicity, and characterization of the thermophysical properties of the candidate solvents. ...

    SBIR Phase I 2001 Department of DefenseAir Force
  6. Advanced Testing of Safe-Solvent Replacements for CFC-113 For Use in Cleaning of Oxygen Systems

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N/A

    The objective of this Phase II research is to perform advanced testing of second-generation solvent replacements used for cleaning hydrocarbon and fluorocarbon residues from oxygen systems. The advanced testing includes determining flammability,autogenous ignition temperature in oxygen, atmospheric impact, toxicity, and characterization of the thermophysical properties of the candidate solvents. ...

    SBIR Phase II 2001 Department of DefenseAir Force
  7. Advanced Weapons Material: Exterior Surface

    SBC: Applied Polymer Systems, Inc.            Topic: N/A

    Applied Polymer Systems, Inc (APS) has developed a new plasma spray process capable of applying a polymetric resin binder with high filler levels in coating form over various substrates. The process can be robotically controlled and is environmentally friendly. A vacuum collection system captures vapors, and no solvents are used in the process. The filters can be functional and contribute to surfa ...

    SBIR Phase I 1993 Department of DefenseNavy
  8. A High-Efficiency, Low-Power, Two-Phase Pumped Loop (MEC Prop No. 901LG2002)

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N/A

    The goal of the Phase II effort is to optimize the desing of and demonstrate a low-lift heat pump thermal control system for spacecraft heat refection. This low-lift heat pump thermal control system will use an innovative magnetic-bearing centrifugalcompressor. The Phase II effort will result in optimization of the centrifugal compressor impeller, diffuser, and shroud designs through extensive exp ...

    SBIR Phase II 2001 Department of DefenseAir Force
  9. AlGaInP/GaAs 27% Efficient Top Solar Cells

    SBC: ASTROPOWER, INC.            Topic: N/A

    AstroPower will develop a two-junction monolithic tandem solar cell composed of (AlxGa1-x)0.51 In(0.49)P, which is lattice matched to GaAs, as the top cell in a three-junction, two-terminal tandem solar cell. This new tunable bandgap Al-Ga-In-P material is capable of current matching in a two-junction monolithic tandem solar cell two-terminal design of the Al-Ga-In-P over GaAs yielding a best case ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  10. AlGaP/GaP Heterostructure Ultraviolet Detector

    SBC: ASTROPOWER, INC.            Topic: N/A

    AstroPower is developing a highly sensitive UV detector based on epitaxial AlGaP/GaP heterostructures, a promising new material system for ultraviolet detectors. Detecting ultraviolet light is important to spectrophotometry, astronomy, high-energy physics, medicine, UV curing, photoresist exposure, and chemical processes. The large bandgap and crystalline quality of gallium phosphide will provide ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government