List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 2 Micron Laser System for Next Generation Tactical Engagement Simulation (TES) System

    SBC: Schwartz Electro-Optics, Inc            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseArmy
  2. A MMW POLARIZATION DIVERSE TRANSCEIVER SYSTEM PROVIDING BASE BAND FOUR PLANE MONOPULSE, DYNAMICALLY ADJUSTABLE NULLS & POLARIZATION

    SBC: UBC INC            Topic: N/A

    UBC, INC., AN ENGINEERING FIRM PERFORMING RESEARCH, DEVELOPMENT, AND LIMITED PRODUCTION OF ADVANCED TECHNOLOGY OVER THE ENTIRE ELECTROMAGNETIC SPECTRUM, SPECIALIZING IN MILLIMETER WAVE AND INFRARED SENSORS, PROPOSES AN SBIR PROGRAM TO PROVIDE DESIGN, SUPPORTING ANALYSIS AND BRASS-BOARD DEVELOPMENT LEADING TO A W-BAND POLARIZATION DIVERSE FOUR PLANE MONOPULSE RADAR WITH DYNAMICALLY ADJUSTABLE POLAR ...

    SBIR Phase II 1993 Department of DefenseAir Force
  3. A Multi-Processor Embedded Data Processor for Multi-Object Detection & Tracking

    SBC: Aeronix, Inc.            Topic: N/A

    The Aeronix Phase I task will demonstrate the application of an innovative parallel processing computer architecture and parallel processing programing envirorment to a class of problems associated with the real time detection, recognition, acquisition and tracking of multLple objects in a high rate image sensor environment. The Phase I task will examine the problems associated with the multiplici ...

    SBIR Phase I 1993 Department of DefenseArmy
  4. A New Class of Highly Oriented Stable Polymer Material for High-Speed Electro-optic Waveguide Devices

    SBC: SIGMA TECHNOLOGIES INTERNATIONAL GROUP, INC.            Topic: N/A

    A new method is proposed for the development of stable, high speed electro-optic polymers for optical waveguide devices such as switches and couplers. Thin polymer films will be produced by a new process that we refer to as flash evaporation. The process is based on negative electron beam photoresist technology, capable of easily processing thin-film and waveguide structures on various substrates, ...

    SBIR Phase I 1993 Department of DefenseAir Force
  5. A Very High Heat Flux Microchannel Heat Exchanger and Fluid

    SBC: PhD Research Group, Inc.            Topic: N/A

    A research proposal to develop a very high heat flux heat exchanger to cool semiconductor laser arrays is presented. The proposed design will be based on currently available microchannel heat exchangers. In order to enhance their performance so that they may be used for the proposed application, a phase change material suspension will be used as the heat transfer fluid. Unlike conventional phase c ...

    SBIR Phase I 1993 Department of DefenseAir Force
  6. Active/Passive Clearance Control for Small Turbine Engines

    SBC: Scientific Aero Monitoring,            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseArmy
  7. Advanced Avionics Support for Ground Based Munitions Testing

    SBC: Wintec, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of DefenseAir Force
  8. Advanced Regenerators for Very Low Temperature Cryocoolers

    SBC: General Pneumatics Corp            Topic: N/A

    Proposed is a new concept for high effectiveness regenerative heat exchangers which are critically needed to develop efficient cryocoolers for operation at temperatures of 10K and below. Development of light weight, power efficient, long life cryocoolers capable of providing refrigeration at and below 10K has become a critically-pacing technology for spaceborne instrumentation. The best current 10 ...

    SBIR Phase I 1993 Department of DefenseAir Force
  9. Advanced Weapons Material: Exterior Surface

    SBC: Applied Polymer Systems, Inc.            Topic: N/A

    Applied Polymer Systems, Inc (APS) has developed a new plasma spray process capable of applying a polymetric resin binder with high filler levels in coating form over various substrates. The process can be robotically controlled and is environmentally friendly. A vacuum collection system captures vapors, and no solvents are used in the process. The filters can be functional and contribute to surfa ...

    SBIR Phase I 1993 Department of DefenseNavy
  10. ATDA STRUCTURE AND ARCHITECTURE FOE AUTOMATED IMAGE INTERPRETATION

    SBC: Di/mac Technologies, Inc.            Topic: N/A

    The goal of this project is to develop new approaches and innovative ideas, which are needed to represent oceangraphic satellite imagery using data structures of software architecture that facilitate storage, transmission, processing throughput and accuracy of automated analysis results. Wavelet representation provides a unified framework for techniques including image features analysis, image com ...

    SBIR Phase I 1993 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government