Award Data

N/A

Through the Phase I SBIR process, Rini Technologies Inc. has demonstrated the feasibility of using evaporative spray cooling to reduce the temperature of high power laser diode stacks below the temperature at which they currently operate. This reductionin temperature, while operating at high power, results in increased laser efficiency, extended lifetime and reliability, as well as the ability to ...

In this SBIR, AcuSoft will research and develop advanced, real-time PC Image Generation technology, as well as develop tools and integrate the required capabilities using PC image generators. The resultant products will provide to the DOD M&S communitythe advanced real-time image generation technology that will enable the use of lower-cost PC graphics in military virtual simulation. In our PHASE ...

The objective of this Phase II research is to perform advanced testing of second-generation solvent replacements used for cleaning hydrocarbon and fluorocarbon residues from oxygen systems. The advanced testing includes determining flammability,autogenous ignition temperature in oxygen, atmospheric impact, toxicity, and characterization of the thermophysical properties of the candidate solvents. ...

The objective of this Phase II research is to perform advanced testing of second-generation solvent replacements used for cleaning hydrocarbon and fluorocarbon residues from oxygen systems. The advanced testing includes determining flammability,autogenous ignition temperature in oxygen, atmospheric impact, toxicity, and characterization of the thermophysical properties of the candidate solvents. ...

Applied Polymer Systems, Inc (APS) has developed a new plasma spray process capable of applying a polymetric resin binder with high filler levels in coating form over various substrates. The process can be robotically controlled and is environmentally friendly. A vacuum collection system captures vapors, and no solvents are used in the process. The filters can be functional and contribute to surfa ...

The goal of the Phase II effort is to optimize the desing of and demonstrate a low-lift heat pump thermal control system for spacecraft heat refection. This low-lift heat pump thermal control system will use an innovative magnetic-bearing centrifugalcompressor. The Phase II effort will result in optimization of the centrifugal compressor impeller, diffuser, and shroud designs through extensive exp ...

The Athena Group will develop an innovative, low-power, fast Fourier transform (FFT) processor for use in mitigating both intentional and unintentional narrowband jamming and interference in handheld global positioning system (GPS) receivers. Athena'sadvanced digital signal processing (DSP) technology is capable of performance levels well beyond those of conventional DSP technologies. Athena will ...

UBC, INC., AN ENGINEERING FIRM PERFORMING RESEARCH, DEVELOPMENT, AND LIMITED PRODUCTION OF ADVANCED TECHNOLOGY OVER THE ENTIRE ELECTROMAGNETIC SPECTRUM, SPECIALIZING IN MILLIMETER WAVE AND INFRARED SENSORS, PROPOSES AN SBIR PROGRAM TO PROVIDE DESIGN, SUPPORTING ANALYSIS AND BRASS-BOARD DEVELOPMENT LEADING TO A W-BAND POLARIZATION DIVERSE FOUR PLANE MONOPULSE RADAR WITH DYNAMICALLY ADJUSTABLE POLAR ...

The Aeronix Phase I task will demonstrate the application of an innovative parallel processing computer architecture and parallel processing programing envirorment to a class of problems associated with the real time detection, recognition, acquisition and tracking of multLple objects in a high rate image sensor environment. The Phase I task will examine the problems associated with the multiplici ...