You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Abrasion and Impact Resistant Hydrophobic Thermoplastic Coatings for Aircraft Landing Skis/Skids

    SBC: RESODYN CORPORATION            Topic: AF103256

    ABSTRACT: Resodyn Corporations proposed Functionalized Polyethylene (FPE) copolymer thermoplastic coating will overcome the shortcomings of the current ski coating. The FPE will provide the long-lasting, low friction, impact-resistant, abrasion resistant and hydrophobic properties required and will also provide hydraulic fluid resistance and reduced drag during wet snow conditions. Enhancements ...

    SBIR Phase II 2013 Department of DefenseAir Force
  2. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  3. A compact, low cost, in- process welding defects detection system based on thermal plasma emission

    SBC: ALPHASENSE, INC.            Topic: N08178

    In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

    SBIR Phase I 2008 Department of DefenseNavy
  4. Advanced Intelligent Web-Based Options to Acquire and Analyze Aircraft Health and Test Data

    SBC: SENTIENT SCIENCE CORPORATION            Topic: N08122

    Topic Synopsis: Current aircraft disposition tools are not designed to take advantage of predictive prognostic information that will be available on new systems such as the F-35 PHM system or the proposed Maintenance and Monitoring system for the E-2D Hawkeye. The central challenges in this topic are to (1) develop automated reasoner technologies to distill large volumes of PHM data into actionabl ...

    SBIR Phase I 2008 Department of DefenseNavy
  5. Advanced Separation Technologies for Extraction of Rare Earth Elements (REE)

    SBC: SPECTRUM MAGNETICS LLC            Topic: OSD12T01

    The proposed SBIR Phase I program is to develop a novel nanobulb flotation method with high efficiency and rare earth mineral recovery rate comparing to conventional methods. Significant efforts will focus on the studies of fundamental surface chemistry o

    STTR Phase I 2013 Department of DefenseNavy
  6. Advanced Spectrally Selective Materials for Obscurant Applications

    SBC: LUMILANT, INC.            Topic: A13AT016

    As infrared (IR) electo-optical sensors improve in both availability and quality a strong need exists to have comparable improvements in the performance of military obscurants within the IR band. Conventional approaches for creating effective IR obscurants have relied primarily on shaped metal particles with high aspect ratios (e.g. rods, flakes). While efficient it is difficult to create very ...

    STTR Phase I 2013 Department of DefenseArmy
  7. An Advanced NDE Approach to Determine the Adhesive Bond Strength

    SBC: RESODYN CORPORATION            Topic: SB123001

    Bonded composite materials offer considerable opportunity to reduce manufacturing cost, improve structural performance, and improve fuel efficiency of aircraft. However, bonded composite aircraft structures continue to be a challenge to manufacture due to the certification requirement to determine the strength of the bonds in the structures - before they are placed into service. Current testing te ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  8. A New Standard for Power-Aware Programming

    SBC: EM PHOTONICS INC            Topic: A13029

    New enhancements to mobile computers including smaller sensors, displays and powerful processors have made them much more attractive for the battlefield, not only as wearable systems for soldiers, but also unattended ground sensors a warfighter can leave behind for situational awareness. Unfortunately, while the technologies for hands-free interfacing have improved greatly, the challenge of limiti ...

    SBIR Phase I 2013 Department of DefenseArmy
  9. A Novel, Low Cost and Handheld Microwave Sensor for the Detection and Evaluation of Incipient Composite Heat Damage

    SBC: ALPHASENSE, INC.            Topic: N131013

    In this proposal, AlphaSense, Inc. details the development of a novel, low cost and handheld microwave sensor for the detection and evaluation of incipient composite heat damage. The merits of the proposed sensor and its advantages over other techniques are listed below: a) Compact, handheld and low cost, b) Sensitive for incipient heat damage detection, c) Capable of quantitative analysis of the ...

    SBIR Phase I 2013 Department of DefenseNavy
  10. A Process to Produce High-Purity Encapsulated Particulates in Large Quantities

    SBC: FEDERAL TECHNOLOGY GROUP, INC.            Topic: A06083

    In Phase I of this project, FTG researchers showed that complete and uniform coatings of metal-coated particulates provide a mechanism for improving particle distribution, enhancing mechanical properties of fabricated components, and significantly improving the performance of reactive materials. This permits the creation of fully dense and high-quality MMCs for the production of bulk materials/coa ...

    SBIR Phase II 2008 Department of DefenseArmy
US Flag An Official Website of the United States Government