Award Data

The objective of this project is to develop and validate a CAD tool for the rapid design of mechanically fastened repairs, bonded repairs, and hybrid repairs involving both adhesive bonding and mechanical fasteners. To allow use by non-specialists, the CAD tool will replace the current process of manual construction of joint finite element models with CAD tinker toy assembly using parametric par ...

In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

A simple clamping U bracket to secure itself under pressure on both sides of the aircraft's structural frame ribs. A clamp will be placed on every section where the bonded studs currently exist. A cavity on the bottom of each clamp will hold a stud or other tool to secure the blankets. The outer surface of the bracket will be made of rubber and the inner core will be made of 9255 spring steel, ...

Topic Synopsis: Current aircraft disposition tools are not designed to take advantage of predictive prognostic information that will be available on new systems such as the F-35 PHM system or the proposed Maintenance and Monitoring system for the E-2D Hawkeye. The central challenges in this topic are to (1) develop automated reasoner technologies to distill large volumes of PHM data into actionabl ...

Information Management is an important component in the development of viable information sharing systems, such as JBI, where shared information may be manipulated to derive further information. The qualities of such derived information depend on qualities of the contributing information and of their sources. Determining information quality requires propagation of qualitative and pedigree data abo ...

The military is actively implementing diagnostics, prognostics, and health management technologies across platforms in an effort to reduce maintenance costs, increase readiness and availability, and improve safety. In aircraft electric power systems, the largest maintenance driver is the generator, followed by the batteries. Common faults include winding shorts, pitting and spalling in bearings, a ...

A system that provides a large field of regard for propagation of a lethal beam from a transonic platform will be evaluated. The proposed design incorporates concepts to address the fact that shocks do develop in transonic flow, but with the proposed system the field of regard should be enhanced. A second feature is provided that allows a simple method of controlling optical aberrations imposed b ...

ANP Technologies proposes to integrate a commercially available air sample concentrator from ICx MesoSystems with our automated detection instrument that uses the NIDS® multiplexed assays and NIDS® Auto-Reader (AR) device. A trigger device may also be incorporated into the final system, which might better enable the system to serve as a remote monitor of air streams. The proposed effort will b ...

The development and introduction of new aircraft for the Fleet, or the deployment of existing aircraft on a new carrier, requires knowledge of the deck area, or “spot factor,” that characterizes the particular aircraft type. Currently, aircraft spot factors are obtained by iterative, manual methods that are very time consuming. NAVAIR is seeking the creation of a software tool to automatical ...