List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 3D Visualization for Serpentine Robotic Systems

    SBC: LITE CYCLES, INC.            Topic: SB062023

    During the program baseline, LCI will develop an eyesafe, large array RT3D camera system that generates both 3D and 2D grayscale imagery in real-time that can be mounted on the iRobot PackBot. The 3D and 2D grayscale imagery can be fused in software to display both range and albedo information for each pixel in the 3D image, a display that will provide better scene understanding. During the option ...

    SBIR Phase II 2008 Department of DefenseDefense Advanced Research Projects Agency
  2. A Cartesian Mesh Method For Turbulent Flow Simulation

    SBC: D&P LLC            Topic: N08T008

    This STTR Phase I project proposes to develop a Cartesian mesh solver for high Reynolds number turbulent flow simulations. Due to its ease of grid generation, simplicity of flow solver, lower computational storage requirement, significantly less operational count per cell, and also due to rapid growth of computer power, the Cartesian mesh approach gets revitalized recently with grid adaptation. Th ...

    STTR Phase I 2008 Department of DefenseNavy
  3. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  4. A compact, low cost, in- process welding defects detection system based on thermal plasma emission

    SBC: ALPHASENSE, INC.            Topic: N08178

    In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

    SBIR Phase I 2008 Department of DefenseNavy
  5. A Coupled Computational Aeroelasticity and Thermal Response Analysis Tool

    SBC: D&P LLC            Topic: AF073145

    This Small Business Innovation Research Phase I project develops a coupled computational aeroelasticity and thermal response analysis tool that can be used to analyze and design ballistic reentry vehicles and Trajectory Shaping Vehicles (TSV). In Phase I, a well validated thermal response analysis module will be integrated into a well validated computational aeroelasticity code. In Phase II, a gas ...

    SBIR Phase I 2008 Department of DefenseAir Force
  6. A Modular, Lightweight, Removable Ballistic Protection System for Aviation Helmets

    SBC: SAFE INC            Topic: A04195

    The purpose of the Phase I SBIR program was to demonstrate the feasibility of a ballistic covering for the existing HGU-56/P flight helmets. The scope of this effort covered the identification of applicable materials; fabrication and testing of ballistic test panels and development and fabrication of a helmet armor concept. In Phase II a basic design will be developed and readied for production sh ...

    SBIR Phase II 2006 Department of DefenseArmy
  7. A Process to In-Situ Form Cooling Channels in SiC/SiC Composite Turbine Blades and Nozzles

    SBC: ATS-MER, LLC            Topic: A07012

    Ceramic matrix composites (CMCs) such as SiC/SiC offer higher temperature capabilities than metals with cooling channels in turboshaft engines. Even higher operating temperatures are possible if cooling channels can be produced in SiC/SiC composites as well as silicon free environmental barrier coatings (EBC). The Phase I program demonstrated that cooling channels can be in-situ formed in the fa ...

    SBIR Phase II 2008 Department of DefenseArmy
  8. A System Approach using CartEuler-based Nonlinear Aeroelasticity for FP/LCO Analysis and Design of Control Surfaces

    SBC: Zona Technology, Inc            Topic: AF081086

    The ZONA Team proposes to develop a nonlinear aeroelastic/aeroservoelastic methodology for free-play (FP)/LCO analysis and prediction for aircraft control surfaces at various trim conditions and subjected to gust/pilot commend excitations. In phase I, a CartEuler-based FP/LCO methodology (CEFM) will be established with a ZONA-developed Cartesian Euler solver fully integrated with a ZONA nonlinear ...

    SBIR Phase I 2008 Department of DefenseAir Force
  9. A Two Stage Data Fusion Strategy for False Alarm Mitigation in Propulsion Health Management (PHM) Systems

    SBC: Scientific Monitoring, Inc.            Topic: AF081054

    Scientific Monitoring, Inc. (SMI) proposes a novel two-stage comprehensive strategy for fault diagnosis for the purpose of reducing the occurrence of No Fault Found (NFF) events in Propulsion Health Management (PHM) activities. The strategy includes modeling and algorithmic elements that account for uncertainty at two distinct stages in the fault detection process: (a) anomaly detection, and (b) ...

    SBIR Phase I 2008 Department of DefenseAir Force
  10. Adjustable Attachment Device for Aircraft Blankets

    SBC: HILLIER DEVELOPMENT            Topic: N06016

    A simple clamping U bracket to secure itself under pressure on both sides of the aircraft's structural frame ribs. A clamp will be placed on every section where the bonded studs currently exist. A cavity on the bottom of each clamp will hold a stud or other tool to secure the blankets. The outer surface of the bracket will be made of rubber and the inner core will be made of 9255 spring steel, ...

    SBIR Phase I 2006 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government