List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  2. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  3. A compact, low cost, in- process welding defects detection system based on thermal plasma emission

    SBC: ALPHASENSE, INC.            Topic: N08178

    In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

    SBIR Phase I 2008 Department of DefenseNavy
  4. A High Speed Towed Magnetic Array for In-Road Detection of Improvised Explosive Devices Employing Optimized Magnetic Map Differencing

    SBC: GEOPHEX, LTD.            Topic: N/A

    The goal of this project is to design, build, and test an active electromagnetic induction (EMI) sensor array for detecting and characterizing IEDs. At low frequencies (below a few kHz), an EMI sensor is a magnetometer that primarily responds to susceptibility targets (i.e., ferrous objects). The main difference is that, while a magnetometer uses the earth's field as the illuminating source, an EM ...

    SBIR Phase II 2008 Department of DefenseArmy
  5. A High Speed Towed Magnetic Array for In-Road Detection of Improvised Explosive Devices Employing Optimized Magnetic Map Differencing

    SBC: GEOPHEX, LTD.            Topic: A07169

    The goal of this project is to design, build, and test an active electromagnetic induction (EMI) sensor array for detecting and characterizing IEDs. At low frequencies (below a few kHz), an EMI sensor is a magnetometer that primarily responds to susceptibility targets (i.e., ferrous objects). The main difference is that, while a magnetometer uses the earth’s field as the illuminating source, an ...

    SBIR Phase II 2008 Department of DefenseArmy
  6. A Multiscale Software Tool for Field/Circuit Simulation

    SBC: WAVE COMPUTATION TECHNOLOGIES INC            Topic: A08T004

    Wave Computation Technologies, Inc. (WCT) proposes to develop a new multiscale solver for electromagnetic field/circuit co-simulation. This solver combines three efficient electromagnetic field algorithms, (a) the spectral element time-domain (SETD) method for coarse scales, (b) the enlarged cell technique (ECT) for the boundary conformal finite-difference time-domain method [i.e., the FDTD method ...

    STTR Phase I 2008 Department of DefenseArmy
  7. A New Hybrid Method for High-Order EM-PIC Simulations

    SBC: WAVE COMPUTATION TECHNOLOGIES INC            Topic: AF071009

    Wave Computation Technologies, Inc. (WCT) proposes to develop a new commercial electromagnetic particle-in-cell (EM-PIC) software package based on a 3-D hybrid technique that combines two efficient algorithms, (a) the enlarged cell technique (ECT) and (b) the spectral-element time-domain (SETD) method, as a high-order solver for EM-PIC simulations. This hybrid technique overcomes the well-known l ...

    SBIR Phase II 2008 Department of DefenseAir Force
  8. Adhesives for Rapid Outfitting and Insulation Attachment

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: N08180

    There is an ongoing requirement to reduce the cost and time associated with insulation attachment during outfitting and new construction on naval vessels. Currently, the primary method of attaching insulation on metal surfaces is through the used of welded studs. These studs are attached to decks and bulkheads early in the construction process and are often damaged before the construction process ...

    SBIR Phase I 2008 Department of DefenseNavy
  9. Adjustable Attachment Device for Aircraft Blankets

    SBC: HILLIER DEVELOPMENT            Topic: N06016

    A simple clamping U bracket to secure itself under pressure on both sides of the aircraft's structural frame ribs. A clamp will be placed on every section where the bonded studs currently exist. A cavity on the bottom of each clamp will hold a stud or other tool to secure the blankets. The outer surface of the bracket will be made of rubber and the inner core will be made of 9255 spring steel, ...

    SBIR Phase I 2006 Department of DefenseNavy
  10. Advanced Epoxy System for Large Scale Composite Ship Component Manufacturing Using the VARTM Process.

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: N06T040

    A major limitation of current high performance composites made from vinyl ester resins is their performance with carbon fiber reinforcements. Carbon fiber composites can possess much higher specific stiffness and strength than glass fiber composites, but the laminated composite properties depend on a good interface between the matrix resin and the fiber. Since vinyl ester resins typically do not e ...

    STTR Phase I 2006 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government