Award Data

In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

A simple clamping U bracket to secure itself under pressure on both sides of the aircraft's structural frame ribs. A clamp will be placed on every section where the bonded studs currently exist. A cavity on the bottom of each clamp will hold a stud or other tool to secure the blankets. The outer surface of the bracket will be made of rubber and the inner core will be made of 9255 spring steel, ...

Topic Synopsis: Current aircraft disposition tools are not designed to take advantage of predictive prognostic information that will be available on new systems such as the F-35 PHM system or the proposed Maintenance and Monitoring system for the E-2D Hawkeye. The central challenges in this topic are to (1) develop automated reasoner technologies to distill large volumes of PHM data into actionabl ...

Characterizing turbine engine rotor vibratory characteristics is becoming increasingly complex with the introduction of advance technologies, such as integrally bladed rotors (IBR), low aspect ratio airfoils, 3-D aerodynamic computational fluid dynamics (CFD) design blades, and advance materials. The analysis and measurement techniques used to evaluate the vibratory characteristics has also advan ...

Information Management is an important component in the development of viable information sharing systems, such as JBI, where shared information may be manipulated to derive further information. The qualities of such derived information depend on qualities of the contributing information and of their sources. Determining information quality requires propagation of qualitative and pedigree data abo ...

The military is actively implementing diagnostics, prognostics, and health management technologies across platforms in an effort to reduce maintenance costs, increase readiness and availability, and improve safety. In aircraft electric power systems, the largest maintenance driver is the generator, followed by the batteries. Common faults include winding shorts, pitting and spalling in bearings, a ...

This is a proposal to research new methods of coating small particles using a water-based electroplating process. These methods would build upon existing technology, in which small particulates are placed into a metallic-ion-containing electrolyte solution inside an electroplating device. The particulates are repeatedly stirred, allowing sedimentation to occur by gravity until a sedimentation laye ...

In Phase I of this project, FTG researchers showed that complete and uniform coatings of metal-coated particulates provide a mechanism for improving particle distribution, enhancing mechanical properties of fabricated components, and significantly improving the performance of reactive materials. This permits the creation of fully dense and high-quality MMCs for the production of bulk materials/coa ...

ANP Technologies proposes to integrate a commercially available air sample concentrator from ICx MesoSystems with our automated detection instrument that uses the NIDS® multiplexed assays and NIDS® Auto-Reader (AR) device. A trigger device may also be incorporated into the final system, which might better enable the system to serve as a remote monitor of air streams. The proposed effort will b ...