Award Data

Compact Membrane Systems (CMS) proposes to employ membrane systems for pressure-driven separation of water from black liquor to replace the first two stages of existing multiple-effect evaporators. This is a promising approach to considerably reduce the steam energy required for concentration. Membrane materials must withstand high temperature, high salinity and high pH conditions. Fouling of the ...

Each year over 1 billion tons of animal manure is produced in US and it can be a pollution source if not handled properly. "Anaerobic digestion" is an energy efficient way to dispose manure. Through this process manure is converted to biogas and digestate. The manure digestate can be used as fertilizer. Biogas is a mixture of ~60% CH4, ~40% CO2 and trace amounts of contaminant gasses such as H2S. ...

There is a critical need for DoD to develop power sources that will increase the mission lifetime for unattended sensors and sensor radio networks. In order to take advantage of recent advances in extremely low power subthreshold circuits to greatly exte...

In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

Idaho Scientific proposes the development of Secure Protocol Unalterable Data (SPUD) as a means to identify activity against system technologies. Approved for Public Release | 17-MDA-9219 (31 May 17)

When imaging over long distances, atmospheric turbulence between the camera and subject degrades the collected data limiting the effective resolution, regardless of the quality of the optic and sensor used. This reduction in image quality can have serious impacts on the ability to carry out missions by reducing situational awareness and preventing target identification. EM Photonics has been worki ...

This Phase I SBIR proposal aims to develop flexible and maritime compatible radio frequency (RF) materials for microwave absorbing material applications and antenna applications at GHz frequencies. Based on the deep understanding of material physics for high frequency properties, and extensive experience in fabricating and supplying RF materials, Spectrum Magnetics proposes several material platfo ...

In this SBIR effort we will develop a high-power, high-speed photodiode (PD) receiver optimized for operation at 1 micron wavelength based on collaboration with Dr. J.C. Campbells research group at the UVA. Demand of such photonic receiver arose from the urgent need of high performance microwave photonic links that replace the conventional metal cables for better SWaP, immunity to EMI and broader ...

Both the Deep Skirt and Advanced Skirt System material used on Landing Craft Air Cushion (LCAC) experience significant wear during normal operations, which require expensive, time-consuming maintenance repairs. The US Navy is looking for innovative new material and manufacturing method for skirt systems to improve it durability and reduces Total Ownership Cost (TOC). Rubber skirts experience two m ...

Sentient along with sub-contractors at Iowa State University, and Honeywell Aerospace will develop and validate the full standalone DigitalClone - Component (DCC) simulation package (the proposed Reliability Centered Additive Manufacturing Design Framework), for assessing tradeoffs in reliability, inspectability, performance/durability and life-cycle costs of parts made through Additive Manufactur ...