You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Printable Materials with Embedded Electronics and Radio Frequency Components

    SBC: Delux Advanced Manufacturing, LLC            Topic: A16006

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards a more integrated design approach that efficiently utilizes all available space. In fact, to accommodate limited space constraints many commercial off-the-shelf (COTS) systems will need to be replaced by custom designed and fabricated components. For radiofrequency (RF) electronic systems, this will requ ...

    SBIR Phase II 2017 Department of DefenseArmy
  2. Integrable High-Performance Analog Optical Modulators

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF171126

    In this SBIR effort we will develop broadband, low V, high linearity, thin-film lithium niobate on insulator (LNOI) modulators that are fully compatible with silicon photonic integrated circuits (PIC) foundry processes. Developing such devices as well a

    SBIR Phase I 2017 Department of DefenseAir Force
  3. Efficient Arrays for Generating Light Emission (EAGLE)

    SBC: Chip Design Systems Inc.            Topic: AF16AT22

    With today's IRLED devices, >99.4% of input electrical power is converted into parasitic/waste heat. Moreover, as the local temperatures of the pixels increase due to the generated heat, IRLED optical efficiency is further reduced. Overall this severely limits the number and intensity of array pixels that can be simultaneously operated at high apparent temperatures. In Phase 2, we focus on develop ...

    STTR Phase II 2017 Department of DefenseAir Force
  4. Tools for Cross-Platform Software Development and Performance Projection

    SBC: EM PHOTONICS INC            Topic: AF161088

    Developers of modern software, particularly those targeting mobile or embedded platforms, are presented with a wide variety of hardware choices. Solutions can be built on microprocessors (e.g. x86, ARM, or Power architecture), GPUs (e.g. NVIDIAs Tegra), DSPs, FPGAs, or some combination of these technologies. Not only does this place a significant burden on programmers in understanding the intricac ...

    SBIR Phase II 2017 Department of DefenseAir Force
  5. Advanced RIIC Technology to Increase Density and Efficiency of IRLED Arrays (ART-IDEA)

    SBC: Chip Design Systems Inc.            Topic: AF171015

    We propose to study how extraction efficiency can be improved by reducing IRLED pixel pitch. Our approach is to scale the size of RIIC pixel and IRLED device from 24-microns down to 12-microns and to lower the IRLED drive voltage from 10 Volts to 5 Volts.

    SBIR Phase I 2017 Department of DefenseAir Force
  6. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk. There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution. Radio fre ...

    STTR Phase I 2017 Department of DefenseAir Force
  7. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: Delux Advanced Manufacturing, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the 5-500 m range. The metal electrodes are typically sputter coated onto the substrate, using lithogra ...

    STTR Phase I 2017 Department of DefenseArmy
  8. Development of In-Process Monitoring Closed-Loop Feedback for Use in Aluminum Alloy Additive Manufacturing (AM) Applications

    SBC: SENTIENT SCIENCE CORPORATION            Topic: A17003

    Sentient Corporation proposes to integrate its DigitalClone® Component (DCC) physics-based modeling technology and John’s Hopkins University Applied Physics Laboratory’s in-situ thermal sensors to develop a comprehensive sensor-based tool to monitor, identify and locate defects in metallic additive manufacturing, and create a DCC model-enabled feedback loop to correct the process-induced defe ...

    SBIR Phase I 2017 Department of DefenseArmy
  9. 1 Micron Fiber Optic Receiver for Mil-Aero Environment

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: N171031

    In this SBIR effort we will develop a high-power, high-speed photodiode (PD) receiver optimized for operation at 1 micron wavelength based on collaboration with Dr. J.C. Campbells research group at the UVA. Demand of such photonic receiver arose from the urgent need of high performance microwave photonic links that replace the conventional metal cables for better SWaP, immunity to EMI and broader ...

    SBIR Phase I 2017 Department of DefenseNavy
  10. Improved Skirt System for Air Cushion Vehicles

    SBC: Kubota Research Associates            Topic: N171042

    Both the Deep Skirt and Advanced Skirt System material used on Landing Craft Air Cushion (LCAC) experience significant wear during normal operations, which require expensive, time-consuming maintenance repairs. The US Navy is looking for innovative new material and manufacturing method for skirt systems to improve it durability and reduces Total Ownership Cost (TOC). Rubber skirts experience two m ...

    SBIR Phase I 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government