You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Cavity Enhanced Terahertz Absorption Spectrometer (CETAS)

    SBC: ALPHASENSE, INC.            Topic: A08075

    In this proposal, AlphaSense, Inc. (AI) and the Oklahoma State University (OKState) detail the development of a novel Cavity Enhanced Terahertz Absorption Spectrometer (CETAS). Key innovations of the proposed system include: a) the use of a small Whispering- Gallery- Mode (WGM) cavity to achieve very long pathlength; and b) the integration of the WGM cavity with the conventional pulsed and continu ...

    SBIR Phase I 2008 Department of DefenseArmy
  2. A compact, low cost, in- process welding defects detection system based on thermal plasma emission

    SBC: ALPHASENSE, INC.            Topic: N08178

    In this proposal, AlphaSense, Inc. (AI) and the University of Michigan (UM) detail the development of a compact, portable, and low cost in-process weld defects detection system. Key innovations of the proposed system include: a) weld defects monitoring based on plasma emission characteristics; b) use the electron temperature of the plasma as an indicator of the weld quality, c) use multiple plasma ...

    SBIR Phase I 2008 Department of DefenseNavy
  3. ACTIVATED METAL DECOY FOR LOW IR SIGNATURE AIRCRAFT

    SBC: Alloy Surfaces Company, Inc.            Topic: N/A

    ACTIVATED STEEL FOIL FABRICATED INTO ELEMENTS TO BE PACKAGED AS EXPENDABLE DECOYS HAS SHOWN GOOD PERFORMANCE IN LOW IR SIGNATURE APPLICATIONS. THE PRESENT BATCH PRODUCTION PROCESS FOR THESE FOILS ENTAILS, IN PART, TWENTY HOURS OF FURNACE TREATMENT. A COMBINATION OF NINE SEPARATE OPERATIONS, LOW PRODUCTION RATES AND HIGH LABOR COSTS YIELDS A UNIT MANUFACTURING COST OF MORE THAN $250.00. WE PROPOSE ...

    SBIR Phase I 1990 Department of DefenseNavy
  4. Adaptive Materials for SHM

    SBC: AURA TECHNOLOGIES, LLC            Topic: AF17AT018

    Bennett Advanced Research proposes to examine fundamental properties of adaptive materials for use with Additive Manufacturing technologies. The focus will be on developing a system for spacecraft Self Health Monitoring (SHM).

    STTR Phase I 2017 Department of DefenseAir Force
  5. Adhesives for Rapid Outfitting and Insulation Attachment

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: N08180

    There is an ongoing requirement to reduce the cost and time associated with insulation attachment during outfitting and new construction on naval vessels. Currently, the primary method of attaching insulation on metal surfaces is through the used of welded studs. These studs are attached to decks and bulkheads early in the construction process and are often damaged before the construction process ...

    SBIR Phase I 2008 Department of DefenseNavy
  6. Advanced Durability Coatings for Unmanned Aerial Vehicle Propulsion

    SBC: UNITED PROTECTIVE TECHNOLOGIES LLC            Topic: SOCOM163002

    Unmanned Aerial Vehicle (UAV) engine propulsion reliability is often dominated by failures associated with load bearing, sliding, or rotating components. These durability issues result in frequent overhauls, reducing system availability and increasing operating cost. Overcoming these is dramatically more difficult due to the operating conditions for military applications as well as the major empha ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  7. Advanced Epoxy System for Large Scale Composite Ship Component Manufacturing Using the VARTM Process.

    SBC: TRIANGLE POLYMER TECHNOLOGIES, INC.            Topic: N06T040

    A major limitation of current high performance composites made from vinyl ester resins is their performance with carbon fiber reinforcements. Carbon fiber composites can possess much higher specific stiffness and strength than glass fiber composites, but the laminated composite properties depend on a good interface between the matrix resin and the fiber. Since vinyl ester resins typically do not e ...

    STTR Phase II 2008 Department of DefenseNavy
  8. Advanced Intelligent Web-Based Options to Acquire and Analyze Aircraft Health and Test Data

    SBC: SENTIENT SCIENCE CORPORATION            Topic: N08122

    Topic Synopsis: Current aircraft disposition tools are not designed to take advantage of predictive prognostic information that will be available on new systems such as the F-35 PHM system or the proposed Maintenance and Monitoring system for the E-2D Hawkeye. The central challenges in this topic are to (1) develop automated reasoner technologies to distill large volumes of PHM data into actionabl ...

    SBIR Phase I 2008 Department of DefenseNavy
  9. Advanced Manufacturing Technologies

    SBC: SENTIENT SCIENCE CORPORATION            Topic: DLA152001

    In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  10. Advanced Microgrid Power Distribution Unit

    SBC: AURA TECHNOLOGIES, LLC            Topic: A16112

    Bennett Advanced Research proposes to use advances in intelligent power control and management to balance loads and manage assets on a forward operating base or other tactical environment to ensure that the power provided is stable and consistent.

    SBIR Phase I 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government