You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Accelerator for UAV Modeling in Near-Ship Environments Based on Commodity Graphics Cards

    SBC: EM PHOTONICS INC            Topic: N07T004

    UAVS (Unmanned Aircraft Vehicle System) integration with naval vessels is currently realized in limited form. This is largely due to the fact that the operational envelopes of these vehicles are based solely on at-sea flight testing. In addition to the complexities involved with at-sea flight testing, the unsteady nature of ship-airwakes and the use of automated UAV control software necessitates ...

    STTR Phase I 2007 Department of DefenseNavy
  2. ACTIVATED METAL DECOY FOR LOW IR SIGNATURE AIRCRAFT

    SBC: Alloy Surfaces Company, Inc.            Topic: N/A

    ACTIVATED STEEL FOIL FABRICATED INTO ELEMENTS TO BE PACKAGED AS EXPENDABLE DECOYS HAS SHOWN GOOD PERFORMANCE IN LOW IR SIGNATURE APPLICATIONS. THE PRESENT BATCH PRODUCTION PROCESS FOR THESE FOILS ENTAILS, IN PART, TWENTY HOURS OF FURNACE TREATMENT. A COMBINATION OF NINE SEPARATE OPERATIONS, LOW PRODUCTION RATES AND HIGH LABOR COSTS YIELDS A UNIT MANUFACTURING COST OF MORE THAN $250.00. WE PROPOSE ...

    SBIR Phase I 1990 Department of DefenseNavy
  3. Advanced Biomechanical and Physiological Monitoring System for Amputees and Rehabilitating Personnel

    SBC: TENXSYS, INC.            Topic: OSD05H11

    This SBIR Phase II project will develop and build a health monitoring sensor and analysis system to support the return of military personnel with prosthetic devices to active duty. DoD is allowing increasing numbers of soldiers with prosthetics to return to active duty if they are performance capable, minimizing the loss of their valuable core expertise to the services. There are significant cha ...

    SBIR Phase II 2007 Department of DefenseArmy
  4. Advanced Infrared (IR) Sensor Components for Missile Defense

    SBC: NANO LIGHT            Topic: MDA06T011

    The objective of this proposal is to further develop IV-VI PbSnSe detectors epitaxially grown on Si substrates. The motivation of fabricating IV-VI detector arrays on Si is based on the following advantages of IV-VI Pb-salt semiconductors. (1) The large dielectric constant helps screen and localize the defect related effects. (2) The epitaxial material on Si is highly uniform, and thus the cutoff ...

    STTR Phase II 2007 Department of DefenseMissile Defense Agency
  5. Advanced Manufacturing Technologies

    SBC: SENTIENT SCIENCE CORPORATION            Topic: DLA152001

    In response to DLA SBIR Topic DLA152-001 for Advanced Manufacturing Technologies, Sentient Corporation (Sentient) proposes to develop a life cycle cost optimization tool based on our commercial DigitalClone modeling technology. This tool will enable users to evaluate the tradeoffs between alternate manufacturing processes, implementation costs, and the performance/durability of the resultant comp ...

    SBIR Phase II 2017 Department of DefenseDefense Logistics Agency
  6. Advanced MRO Multi-Echelon Planning and Scheduling

    SBC: Anautics, Inc.            Topic: AF06330

    The objective of this proposal is to identify and integrate multi-echelon constraints in Manufacturing Repair Overhaul (MRO) process planning and scheduling. The OC-ALC depot operates in a multi-echelon MRO environment that is highly constrained regarding its capacities, resources, deadlines, and other physical limitations. The representation, capture, satisfaction and relaxation of these constra ...

    SBIR Phase I 2007 Department of DefenseAir Force
  7. Advanced RIIC Technology to Increase Density and Efficiency of IRLED Arrays (ART-IDEA)

    SBC: Chip Design Systems Inc.            Topic: AF171015

    We propose to study how extraction efficiency can be improved by reducing IRLED pixel pitch. Our approach is to scale the size of RIIC pixel and IRLED device from 24-microns down to 12-microns and to lower the IRLED drive voltage from 10 Volts to 5 Volts.

    SBIR Phase I 2017 Department of DefenseAir Force
  8. Aircraft Battle Damage Assessment Tool, (Aircraft Battle Damage Repair (ABDR))

    SBC: OPEN SOLUTIONS, INC.            Topic: AF05257

    Many of the engineering tasks necessary for adequate Aircraft Battle Damage Repair Assessment are currently being performed manually. These manual engineering calculations can be arduous, time consuming, and error prone. Periodic turnover of ABDR personnel exacerbates this challenge and highlights the need for a tool that can both assist with the operational aspects of ABDR engineering and act as ...

    SBIR Phase II 2007 Department of DefenseAir Force
  9. ALUMINUM-GALLIUM-ARSENIDE TOP SOLAR CELL FOR MECHANICAL ATTACHMENT TO A SILICON CONCENTRATOR WITH IMPROVED AMO EFFICIENCY

    SBC: ASTROPOWER, INC.            Topic: N/A

    INCREASES IN SOLAR CELL EFFICIENCY CAN BE ACHIEVED WITH TANDEM MULTI-JUNCTION STRUCTURES TO IMPROVE THE PERFORMANCE AND SCALE OF SPACE PHOTOVOLTAIC CONCENTRATORS. THE "TOP SOLAR CELL" TANDEM APPROACH COULD INCREASE ENERGY CONVERSION EFFICIENCY BY AS MUCH AS 100%. A SELF-SUPPORTING ALUMINUM-GALLIUM-ARSENIDE (ALGAAS) TOP SOLAR CELL IS BEING DEVELOPED FOR MECHANICAL ATTACHMENT TO A SILICON CONCENTRAT ...

    SBIR Phase II 1990 Department of DefenseMissile Defense Agency
  10. A Novel, Low Cost and Handheld Metal Sorting Sensor for Chemical Cleaning and Stripping Process

    SBC: ALPHASENSE, INC.            Topic: AF161009

    ABSTRACT: After a certain amount of service time, many aircraft components need to be cleaned and the coatings on those parts need to be stripped. Prior to the chemical cleaning and stripping processes, those parts are routinely examined by inspectors to locate the part numbers and find their matches on a list. Such a visual inspection process is not only time consuming, but also prone to human er ...

    SBIR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government