You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. SBIR Phase I:A Wearable, Independent, Braille-Assistive Learning Device

    SBC: BRAILLEWEAR            Topic: HC

    The broader/commercial impact of this Small Business Innovation Research (SBIR) Phase I project is in creating an independent. assistive Braille learning device for blind people. The ability to read Braille is highly correlated with improved independence and quality of life. An estimated 70% of the blind are unemployed yet, of that subpopulation that is Braille literate, only 10% are unemployed. T ...

    SBIR Phase I 2023 National Science Foundation
  2. SBIR Phase I:Boosting Industrial Bio-Fermentation with Microbial Stem Cells

    SBC: ASIMICA, INC.            Topic: BT

    The broader impact of this Small Business Innovation Research (SBIR) Phase I project is to reimagine bio-manufacturing with a novel platform technology that could boost the yields of many products, including food additives, biomaterials precursors, biofuels, and pharmaceuticals. The technological advancement addresses a fundamental issue that limits conventional bio-fermentation, which is that pro ...

    SBIR Phase I 2023 National Science Foundation
  3. SBIR Phase I: Real-Time Allergen Detection Technology for Dietary Proteins Transferred to Human Milk

    SBC: FREE TO FEED, INC.            Topic: BM

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase I project is to provide the first test to determine the allergen content of human milk accurately, quickly, and cost-effectively. As much as 25% of infants have reported allergic responses to dietary proteins found in human milk which often results in breast/body feeding termination. Breast/body feeding ...

    SBIR Phase I 2023 National Science Foundation
  4. SBIR Phase II:Use of ultraviolet light as a treatment for pathogens in strawberry fields

    SBC: TRIC ROBOTICS INC.            Topic: R

    The broader impact/commercial potential of this Small Business Innovation Research (SBIR) Phase II project seeks to accelerate the transition from chemical pesticides to non-chemical alternatives by providing farmers with a sustainable, long-term solution for managing pests, while reducing agricultural impacts on human health and the environment. Today, strawberry farmers are reliant on chemical p ...

    SBIR Phase II 2023 National Science Foundation
  5. 08b: Drone-deployable transmission sensor unit for widespread phasor, power quality, and environmental measurement to increase grid throughput, reliability, and efficiency

    SBC: PITCH AERONAUTICS INC.            Topic: C5608b

    Dynamic Line Ratings (DLRs) can dramatically increase transmission line current capacity, allowing increased renewable energy penetration, decreased line congestion, and prevention of line construction. However, DLR implementation highly depends on unmeasured local line wind, solar irradiation, and line conditions. Today these conditions are only modeled or measured at isolated locations along a s ...

    SBIR Phase I 2023 Department of Energy
  6. Decarbonized Bio-based 2-Methylfuran Manufacturing in America for Sustainable Domestic Bio-Economy

    SBC: RIKARBON INC            Topic: C5610d

    2-Methylfuran (2MF) is a versatile non-food biomass derived low-carbon number performance advantaged bio-product. It is used for manufacturing green solvent (2-methyltertrahydrofuran (2MeTHF)), UpSycal?oils that RiKarbon is manufacturing for end-use natural and sustainable cosmetics and lubricants, and chemical/pharmaceutical intermediates. Currently fossil-based incumbent solvents such as tetrahy ...

    SBIR Phase I 2023 Department of Energy
  7. Development of New Metallization Pastes for Front-Side of Tunnel Oxide Passivated Contact Crystalline Silicon Solar Cells

    SBC: ADVANCED MATERIAL ANALYSIS TECHNOLOGY LLC            Topic: C5615f

    AMA Tech is developing a cutting-edge metallization paste for the front side of tunnel oxide passivated contact (TOPCon) crystalline silicon solar cells, which is expected to improve TOPCon solar cell efficiency significantly. This development has the potential to disrupt the photovoltaic industry, as even a small increase in cell efficiency could replace current passivated emitter and rear cell ( ...

    SBIR Phase I 2023 Department of Energy
  8. Dechlorination of Mixed-Plastics Feedstock with Low Temperature Pyrolysis for Downstream Gasification and Hydrogen Production

    SBC: MICROBEAM TECHNOLOGIES INCORPORATED            Topic: C5626d

    Municipal Solid Waste (MSW) is a huge untapped renewable feedstock resource to produce hydrogen through gasification. Currently, the utilization MSW for hydrogen production is not realized due to the presence of chlorine that causes degradation of gasifier components and formation of pollutants during gasification. This proposed technology has the potential to remove chlorine and produce a consist ...

    SBIR Phase I 2023 Department of Energy
  9. Selective Electrochemical Recovery of Rare Earth Elements from Ore

    SBC: WYONICS LLC            Topic: C5604a

    1. Problem StatementCurrent industrial-scale rare earth element separation technologies are based on solvent extraction schemes which produce large amounts of undesirable chemical waste, including the loss of volatile organic solvents and reagents employed in the treatment of feed streams. These concerns have severely limited the development of U.S.-based rare earth element separation facilities. ...

    SBIR Phase I 2023 Department of Energy
  10. Powder Injection Molding Processes for Manufacture of Fast Reactor Nuclear Fuels

    SBC: J FOSTER & ASSOCIATES LLC            Topic: C5640v

    Current methods of manufacturing sodium fast reactor (SFR) fuels are constrained to small window of manufacturability. Powder forming processes could provide unique material advantages over traditional casting and extrusion techniques; however, fuel materials in powder form are highly reactive with oxygen and represent a pyrophoric hazard. U and Pu alloys and ceramics are easily dispersible in pow ...

    SBIR Phase I 2023 Department of Energy
US Flag An Official Website of the United States Government