List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Generating Autoclave-Level Mechanical Properties with Out-of-Autoclave Thermoplastic Placement of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: T702

    While in the 1970's and 1980's, composites were adopted for aerospace structure for increased performance and weight savings, the 1990's and 2000's witnessed the attention towards cost-effective fabrication. All thermoset processes that utilize such machines rely on autoclaves to consolidate the laminates, at significant acquisition and operational expense. Autoclaves to consolidate wings are hu ...

    STTR Phase II 2009 National Aeronautics and Space Administration
  2. A Novel Noninvasive Microwave Sensor for Quantitative Assessment of Degree of Sensitization in Marine Aluminum Alloys

    SBC: ALPHASENSE, INC.            Topic: N09T022

    In this proposal, AlphaSense, Inc. (AI) and the Pennsylvania State University (PSU) detail the development of a novel noninvasive microwave sensor to quantify the DoS in marine aluminum alloys. The key innovations of this proposal include the following: a) DoS quantifications based on the correlation between the surface resistivity with the microstructures of the aluminum alloys, b) measurements o ...

    STTR Phase I 2009 Department of DefenseNavy
  3. A Novel Microwave Sensor for Non- Destructive Evaluation of Silicon Nitride Bearing Balls

    SBC: ALPHASENSE, INC.            Topic: AF083109

    In this proposal, Alphasense, Inc. details the development of a novel microwave NDE sensor for defect inspections in silicon nitride bearing balls. The key innovations of this proposal include the following: a) the use of the spherical bearing ball as a dielectric resonator, thus enabling us to correlate the resonance characteristics of the bearing ball with various defects; b) the measurements in ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Innovative Real Time Probes for Plastic Bonded Exp

    SBC: ALPHASENSE, INC.            Topic: A09026

    In this proposal, AlphaSense, Inc. proposes to develop an innovative real time probe for online monitoring of plastic bonded explosive manufacturing process. Key innovations of the proposed sensor probe include: a) the use of a white light interferometer (WLI) to form real time images of the particles for accurate particle size measurements, and b) the use of quartz crystal microbalance (QCM) base ...

    SBIR Phase I 2009 Department of DefenseArmy
  5. Direct Write via Digital Beam Processing for Rad-Hard Flexfet CMOS

    SBC: American Semiconductor, Inc.            Topic: MDA08023

    The is an effort to increase radiation hardness/survivability of microelectronics through innovation of production processes and capabilities by establishing an economically viable low-volume sub-65nm rad-hard foundry CMOS capability based on Digital Beam Processing (DBP) technology. American Semiconductor (ASI) and Digibeam Corporation (DBC) propose a collaboration to evaluate sub-65nm radiation- ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  6. Nano-Passivation of GaSb/InAs Strained Layer Superlattices Infrared Detector

    SBC: B & W Tek Inc.            Topic: A08103

    Mid-infrared (MWIR, wavelength ~10 micron) imaging has significant importance in military surveillance and target recognition, since human body radiation peaks in MWIR. The GaSb/InAs type-II Strained Layer Superlattice (SLS) MWIR detector has been under intensive investigation recently. While much progress has been made to enhance wavelength coverage, one of the few remaining issues has been its r ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. Low Light Level Silicon-Germanium Nano-BiCMOS Infrared Camera

    SBC: B & W Tek Inc.            Topic: A08100

    Low light level infrared imaging has significant importance in military surveillance and target recognition. The proposed broadband low-light-level nano-BiCMOS camera covers visible and near infrared bands from 400 nm to 1,550 nm wavelengths. With a proven nano-technology, the proposed nano-BiCMOS photo-detector solves this long-standing tradeoff between quantum efficiency and dark current by in- ...

    SBIR Phase I 2009 Department of DefenseArmy
  8. Venting of Underground Storage Tanks Containing Ethanol-Gasoline Blends

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Fugitive emissions of VOCs from gasoline marketing facilities are an energy, safety and environmental issue. All new vehicles made after the year 2000 must have an Onboard Refueling Vapor Recovery System (ORVR) which increase fugitive emissions of refueling stations because of interface between ORVR vehicles and gasoline station underground storage systems (UST). The increase of VOCs is attributed ...

    SBIR Phase I 2009 Department of Agriculture
  9. Solvent recovery from vegetable oil miscella by novel solvent-resistant nanofiltration membranes

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Vegetable oil is commonly extracted from oil seeds using hexane. Separation of oil and solvent (hexane) from this extracted mixture (known as miscella) is usually carried out by solvent evaporation or distillation. Solvent recovery from miscella consumes about 50% of the total energy required for the edible oil production. Solvent evaporation is an energy intensive operation and explosive vapors i ...

    SBIR Phase I 2009 Department of Agriculture
  10. Contaminate Removal For Laboratory Pharmaceutical Synthesis

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Most organic pharmaceutical chemical syntheses are done in organic solvents. Oxygen and/or water contaminants in organic solvents will destroy many organic reactants and organometallic reagents and catalysts. As such, the removal of oxygen and water are critical to successful organic synthesis. Unfortunately both oxygen and water are ubiquitous and significant ...

    SBIR Phase I 2009 Department of Health and Human Services

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government