List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Crowd-Sourced Environmental Sensing and Terrain Analysis Using Mobile Devices

    SBC: CREARE LLC            Topic: A16047

    The objective of this project is to improve situational awareness of weather impacted terrain conditions in the battlespace.Our technical approach exploits crowd-sourced data available from existing sensors on mobile devices.Creare is developing these capabilities within the Crowd-Sourced Terrain Analysis for Geospatial Enterprise (CSTAGE) software framework.CSTAGE provides capabilities for measur ...

    SBIR Phase II 2018 Department of DefenseArmy
  2. Advanced Helmet for Maintainer Head and Hearing Protection

    SBC: CREARE LLC            Topic: N04255

    Improved head and hearing protection is required for aircraft maintainers working on a carrier flight deck during launch and recovery operations. Legacy Flight Deck Cranials are inadequate in many aspects including hearing protection and impact protection. In previous work, Creare has developed a Flight Deck Cranial (FDC) that offers unparalleled hearing protection and industrial standard head pro ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Recuperator for SWaP-C Sensitive Cryocooler Applications

    SBC: CREARE LLC            Topic: N161062

    Superconducting radio-frequency receivers, optical absorption energy sensors, and quantum computers have the potential to revolutionize digital communications for manned aircraft, unmanned aerial vehicles, (UAVs) and satellites. Development of low size, weight, power, and cost (SWaP-C) cryocooler technology is essential since these communication systems must operate at cryogenic temperatures. Turb ...

    SBIR Phase II 2018 Department of DefenseNavy
  4. Advanced Technologies for Reducing Decompression Obligation and Risk

    SBC: CREARE LLC            Topic: SB131004

    Despite over 100 years of research, decompression sickness (DCS) remains the mission-limiting factor in the design and execution of combat diving operations.Divers may spend over an hour decompressing after spending as little as ten minutes at the target depth.While decompressing, divers are limited in vertical mobility, making then susceptible to detection and threatening their survivability.This ...

    STTR Phase II 2018 Department of DefenseDefense Advanced Research Projects Agency
  5. Rapid Assessment of Air Void System in Fresh Concrete

    SBC: CREARE LLC            Topic: 171FH2

    Proposal title: Rapid Assessment of Air Void System in Fresh Concrete Water expansion during freeze-thaw cycles can cause deterioration in concrete, leading to scaling, cracking, and crumbling over a period of years. Resistance to this damage is achieved with a system of voids formed by adding surfactants to the fresh concrete to stabilize air bubbles naturally entrained during mixing. The volume ...

    SBIR Phase II 2018 Department of Transportation
  6. Broken Rail Detection from Flashing Rear End Device

    SBC: CREARE LLC            Topic: 171FR2

    Proposal title: Broken Rail Detection from Flashing Rear End Device Broken rails are a common cause of mainline derailments and a particular concern given the increasing use of our rail system for passenger traffic and petroleum products. The progressive nature of the defects provides an opportunity for early detection of cracks before they become significant enough to cause a derailment. Unfortu ...

    SBIR Phase II 2018 Department of Transportation
  7. The Vulcan Advanced Hybrid Manufacturing System

    SBC: Made In Space, Inc.            Topic: H7

    Building on previously funded work by NASA and DARPA, its internal research and development projects, and manufacturing activities occurring on the International Space Station (ISS), Made In Space, Inc. (MIS) is developing the VULCAN system to address NASA’s requirement to produce high-strength, high-precision polymer and metallic components on-orbit with comparable quality to commercially-a ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  8. Industrial Crystallization Facility for Nonlinear Optical Materials

    SBC: Made In Space, Inc.            Topic: H8

    Made In Space, Inc. (MIS) proposes the development, to a critical design level, of an Industrial Crystal Facility (ICF) for microgravity product manufacturing and applied research. The ICF is focused on advanced materials engineering, rather than biomedical research, and expands utilization of the ISS into new product areas not previously investigated. Intended applications include nonlinear optic ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  9. Impact Resistant Composite Structures for Space Suit Applications

    SBC: Composites Automation LLC            Topic: H4

    Composites Automation (CA) proposes to collaborate with the University of Delaware Center for Composite Materials (UD-CCM) and our industry transition partner ILC Dover, to develop innovative material and structure concepts for next generation Space Suit hard composite components. The SBIR goals are develop material systems that survive an impact of 300 J at <0.125” thickness and <1.7 ...

    SBIR Phase II 2018 National Aeronautics and Space Administration
  10. Impact-Resistant, Damage-Tolerant Composites with STF Energy Absorbing Layers

    SBC: STF Technologies LLC            Topic: H4

    We propose an innovative hybrid composite material containing shear thickening fluid (STF) Energy Absorbing Layers (SEALs) that provides superior impact protection and novel, self-healing functionality to prevent leakage after impact.  The proposed innovation directly addresses the need for thin, lightweight, impact-resistant composite materials that can be fabricated in complex geometries fo ...

    SBIR Phase II 2018 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government