Award Data

When many Lithium-ion battery cells are integrated into a large pack, the possible outcomes resulting from individual cell faults are complex and difficult to predict. Consequently, there is great interest in developing design tools to aid in the optimization of pack performance as well as to understand and mitigate the effects of individual cell failures from propagating to other cells or even th ...

DESCRIPTION (provided by applicant): The Advanced Biofidelic Lower Extremity Kids prosthesis (ABLE Kids) project will advance the state-of-the-art of pediatric prosthesis systems by incorporating miniaturized mesofluIdic mechanisms pioneered by the Oak Ridge National Labs (ORNL), advanced control algorithms developed by Clarkson University, and digital proportional control into prosthetic joints ...

Many large-scale numerical simulations can be broken down into common mathematical routines. While the applications may differ, they often need to perform standard functions such as system solves, Fourier transforms, or eigenvalue calculations. Consequently, producing fast, efficient implementations of these methods will benefit a broad range of Air Force applications. Graphics Processing Units (G ...

In this proposal, AlphaSense, Inc. and the Center for Non-destructive Evaluations at Iowa State University detail the development of a compact, low cost handheld sensor for non-destructive material case depth verification. The key innovations of this proposal include the following: a) case depth evaluations based on electromagnetic property measurements, b) a model based alternating current potent ...

The ability for engineers to assess the impact of their preliminary design of solid rocket motor (SRM) performance and combustion stability is the focus of this proposal. The SRMs of the future will be designed for increased performance. Since ballistic excursions, instabilities, and sporadic forces on rocket motors have catastrophic results, Software and Engineering Associates, Inc. (SEA) has mad ...

High performance metals, ceramics, and hard coatings are used in military applications to enhance the performance of key systems needed by the warfighter. One of the most prevalent operations to remove material, achieve the desired surface finish, or enhance part quality is bulk and finish grinding. For typical cutting speeds, conventional synthetic or oil-based coolants are sufficient to remove ...

The global war on terror has dramatically changed the environment in which today's warfighter operates. Many of the locations in theater require moving troops and equipment into areas with unimproved landing zones. Loss of situational awareness in degraded visual environments is one of the largest threats to rotary wing aircraft operating in these areas. Phase Sensitive Innovations has built a pas ...

The proposed Mobile Port concept, consists primarily of a modular and rapidly deployable Floodable Jetty dissipate the required Pierson-Moskowitz Sea State 5 (SS5) energy, without any additional stabilizing anchors. Within the Jetty’s lee, the Lightweight Modular Causeway System (LMCS) that has been under development by the US Army Corps of Engineers, Engineer Research & Development Center (ERDC ...

The solution envisaged in this proposal is to use a very large floating mat (VLFM) as a floating breakwater. Depending on the elasticity, relative dimensions with respect to wave length and wave angle, a mat exhibits different levels of reflection and transmission. The dimensions, elasticity and wave angle will be optimized in an effective design to achieve the maximum protection in the target wav ...

The Marines and other military branches are seeking to develop more efficient, more reliable, and safer logistics fuel (JP-8) burners needed for field kitchen cooking appliances. Existing appliances that operate on logistics fuel have a number of significant shortcomings. In some cases, existing burners involve open flames which are inherently inefficient and vent both heat and potentially hazardo ...