You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Advanced Carbon Nanotube Flywheel for Pulsed Power Applications

    SBC: CREARE LLC            Topic: N152118

    The advancement of systems requiring high power (megawatt level) in a short amount of time (seconds to minutes) is increasing, and there is currently no reliable energy storage and release system to complement these technologies on the Navys ships. Traditional flywheels are heavy with low tip speeds and often have to be built in place. Creare proposes an advanced carbon nanotube (CNT) flywheel for ...

    SBIR Phase I 2016 Department of DefenseNavy
  2. UNMANNED UNDERSEA VEHICLE (UUV) DETECTION AND CLASSIFICATION USING DIVER DETECTION SONARS

    SBC: SCIENTIFIC SOLUTIONS, INC.            Topic: N152113

    Unmanned underwater vehicle (UUV) threats in a harbor environment present a complex, and in certain ways contradictory, set of detection and classification issues. The threats may come in the form of highly aggressive behaviors with associated kinematics and classification signatures, as well as passive loitering with different kinematics and classification opportunities. One obvious modality to c ...

    SBIR Phase I 2016 Department of DefenseNavy
  3. Diver Communication System Upgrade

    SBC: CREARE LLC            Topic: N152110

    Voice communication with military divers is challenged by their extreme operating environment and limited by inadequate performance from their legacy communications equipment. Bottomside, the divers are subject to extreme pressures, mixed breathing gases, and high ambient noise. Clean pickup and delivery of voice would be challenging under these conditions even with ideal communications equipment. ...

    SBIR Phase I 2016 Department of DefenseNavy
  4. Flight Deck Lighting Addressable Smart Control Modules

    SBC: CRITICAL COMMUNICATIONS, CONTROLS AND INSTRUMENTS, LLC            Topic: N152086

    The LED Lighting Fixture Control Module (LFCM) will be the next generation of LED lighting control capability replacing the current C3I LED Flex Driver Control Module (LFDM). C3Is Configurable Distributed LED Driver (CD-LD) technology will meet the LFCM requirements, providing performance enhancements and resulting in significantly reduced installation, operating, maintenance, and configuration co ...

    SBIR Phase I 2016 Department of DefenseNavy
  5. E3 Mitigation for Interceptor Thermal Protection Systems

    SBC: MENTIS SCIENCES INC            Topic: MDA15020

    Mentis Sciences and San Diego Composites have developed composite materials that reduce system weight and sustain more aero-thermally stressing environments. This technology has been validated in rain erosion tests, has undergone preliminary aerothermal evaluation, and is currently undergoing characterization to develop B-Basis material allowables. This will be accomplished by designing and demons ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  6. Smaller, More Powerful, and Longer-Lasting Thermal Batteries

    SBC: Erigo Technologies LLC            Topic: MDA15021

    There is an ever-growing need for increased battery performance in weight-sensitive and volume-constrained applications.In particular, MDA weapons systems need reserve batteries with greater power and energy density to support new mission profiles.Also needed is the ability to develop batteries with non-standard form factors to fit in systems with tight size constraints.Erigo and our collaborators ...

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  7. Mobile Plasma Gasification System for Waste-to-Energy Conversion

    SBC: CREARE LLC            Topic: N152097

    Responsible waste disposal has become an important challenge as the world population has grown, concern about the environment has increased, and energy costs have risen. Landfills are unsustainable and have potential to contaminate groundwater, while incineration consumes fuel and can produce hazardous airborne emissions. In response, we propose to develop a mobile plasma gasification system that ...

    SBIR Phase I 2016 Department of DefenseNavy
  8. Fast Vacuum Isolation Valve for Debris Mitigation

    SBC: CREARE LLC            Topic: DTRA143007

    Nuclear weapons effects (NWE) testing and other experiments conducted with plasma radiation sources require that test articles be exposed to radiation but protected from fast moving debris generated by a high power source event. Solid barriers or membranes are unacceptable because they attenuate the desired radiation, and physical shutters of reasonable size and complexity have difficulty reaching ...

    SBIR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  9. Radio Frequency over Fiber (RFoF) for the Next Generation Submarine Electronic Warfare (EW) System

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: N161034

    Submarine applications for antennas are severely constricted by mission constraints for stealth and force protection. High fidelity fiber optic links could potentially open a new range of mission capabilities by enabling towed antenna arrays that could be accessed while submerged. However, to date RF photonic links have had insufficient noise performance and/or dynamic range to satisfy these missi ...

    SBIR Phase I 2016 Department of DefenseNavy
  10. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: NEVADA COMPOSITES INC            Topic: N16AT015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government