You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Seat/Bolster/Other

    SBC: ACTIVE SHOCK, INC.            Topic: N/A

    A shock mitigating suspended seat, which places the Special Forces Operator in an optimal ergonomic position, will be developed for use in the NSW 11M RIB. It will feature a semi-actively controlled shock absorber to optimize the suspension for a broadrange of operator weights and sea states. In the Phase I effort, a conceptual design and architecture for both control hardware and software was d ...

    SBIR Phase II 2003 Department of DefenseSpecial Operations Command
  2. Safety-Sensing Independence-Enhancing Wheelchair

    SBC: MOBILEROBOTS, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Serious wheelchair accidents have risen to almost 37,000 per year. Users of power chairs are three times as likely to have accidents as users of manual chairs! Many people can neither walk nor successfully navigate a wheelchair, e.g., many with MS, quadraplegia, spinal stenosis, visual and other impairments. The Safety Sensing Independence-Enhancing Wheelch ...

    SBIR Phase II 2003 Department of Health and Human ServicesNational Institutes of Health
  3. Ethanol Production via Consolidated Bioprocessing

    SBC: Advanced Bioconversion Technologies            Topic: N/A

    72808S03-I The conversion of cellulosic biomass to commodity products via biological processing could benefit society by improving energy security, reducing greenhouse gas emissions, and promoting rural economies. However, commercial application is impeded by the current absence of low-cost technology to overcome the recalcitrance of cellulosic biomass. This project will develop a strain of Clo ...

    SBIR Phase I 2003 Department of Energy
  4. Crested Tunnel Barriers for Fast, High Density, Nonvolatile Memory Devices

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    Crested multi-layer tunnel barriers have been proposed, which offer a revolutionary solution to overcome density to speed trade-offs characteristic of present data storage technologies. Practical implementation of the proposed technology will involve useof thin film materials that are readily manufacturable and CMOS-compatible. A critical need exists for experimental verification of the theoreti ...

    STTR Phase II 2003 Department of DefenseAir Force
  5. Real-Time Optical Smoke Meters

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    The SAE smoke number has been an important measurement for prevention of black, sooty plumes in military and commercial aviation. The current method, however, requires the use of a complex extraction system to bring engine exhaust through a filter paper,and then requires a person to remove the soot covered filter and perform a measurement in an optical reflectometer to determine the smoke number. ...

    SBIR Phase I 2003 Department of DefenseAir Force
  6. A Hybrid Pyrolysis/Incineration System for Solid Waste Resource Recovery

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    Both pyrolysis and incineration steps have been considered as the key solid waste processing step for a Controlled Ecological Life Support System (CELSS). Pyrolysis is more amenable to handling mixed solid waste streams in a microgravity environment, but produces a more complex product stream. Incineration produces a simpler product stream, but the incineration of mixed solids is a complex unit op ...

    SBIR Phase I 2003 National Aeronautics and Space Administration
  7. Carbon-Supported Amine Sorbent Monoliths for Carbon Dioxide Removal

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    The NASA objective of expanding the human experience into the far reaches of space will require the development of regenerable life support systems. On-board carbon dioxide (CO2) removal units play a key role in such systems ensuring high quality cabin air for crew members. Similar but more compact units are needed for extravehicular activities (space suit). The overall objective is to develop a C ...

    SBIR Phase I 2003 National Aeronautics and Space Administration
  8. Low-Cost Mercury Sorbents Derived From Waste Tires

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    In this research project, Advanced Fuel Research, Inc., addresses two important environmental problems: (1) removal and recovery of mercury from combustion/incineration flue gas, and (2) reprocessing of waste tires into value-added products. Coal combustion and incineration of municipal and hazardous wastes results in air pollution due to emissions of trace amounts of heavy metals. Because of t ...

    SBIR Phase II 2003 Environmental Protection Agency
  9. Microporous Carbon for Radiation Shielding and Hydrogen Storage

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: N/A

    Advanced Fuel Research, Inc. (AFR) has developed a technology to provide radiation shielding, while simultaneously increasing the capacity of hydrogen storage tanks. This technology uses carbon foam filler with a complex pore structure (?microporosity?). The tank with the filler has, counter-intuitively, more capacity to store hydrogen than an otherwise empty tank. This technology increases hydrog ...

    SBIR Phase I 2003 National Aeronautics and Space Administration
  10. Development of Ultrasonic Appratus for Dental Diagnosis

    SBC: AAC International            Topic: N/A

    DESCRIPTION: An ultrasonic diagnostic apparatus has been proposed for Dental applications in determining tooth pathologies such as demineralization/caries, hidden fractures, and formation of abscesses. The equipment adopts a piezoelectric and laser optic hybrid transduction system for interrogation of teeth. Ultrasonic responses of the tooth structure will be analyzed by a pattern recognition expe ...

    SBIR Phase I 2003 Department of Health and Human ServicesNational Institutes of Health
US Flag An Official Website of the United States Government