You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Enhanced Soil Vapor Extraction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Conventional volatile organic compound (VOC) recovery membranes (silicone rubber) preferentially transport organics over air. Although this silicone rubber has shown some success, it is not appropriate upstream of catalytic oxidation. Catalytic oxidation requires modest increases in VOC concentration at pressure to maintain performance. This is best achieved by using a reverse separation membra ...

    SBIR Phase I 2003 Environmental Protection Agency
  2. Retrofitting Diesel Electrical Generators for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    Diesel generator sets (gen-sets) are used routinely to supply electrical power. Hospitals, businesses, and small communities use gen-sets to help reduce costs by load leveling and provide emergency power during blackouts (either scheduled or unscheduled). Recent power outages in California have led to large increases in the purchase of gen-sets, primarily for providing emergency power. In addit ...

    SBIR Phase II 2003 Environmental Protection Agency
  3. Low-Cost Machining Without Cutting Fluids

    SBC: CREARE LLC            Topic: N/A

    Cutting fluids have been used in machining processes for many years to decrease the temperature during machining by spraying the coolant into the machining zone, directly on the cutting tool and the part. This has the effect of decreasing the tool temperature, which increases tool life and improves the part quality. These benefits come with significant drawbacks. Cutting fluids are environmenta ...

    SBIR Phase II 2003 Environmental Protection Agency
  4. A Carbon-Polymer Matrix-Based Flue Gas Desulfurization Technology

    SBC: CM-Tec, Inc.            Topic: N/A

    This Phase I research project involves an innovative technology for sulfur dioxide (SO2) removal from coal-burning flue gases: flue gas desulfurization (FGD) technology. The current FGD technologies are expensive and energy extensive, and they generate secondary pollution. For example, the limestone-based wet scrubber FGD system costs up to 15 percent of the total construction cost of a coal-fi ...

    SBIR Phase I 2003 Environmental Protection Agency
US Flag An Official Website of the United States Government