You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  2. Optimal Composite Materials using NASA Resins or POSS Nanoparticle Modifications for Low Cost Fabrication of Large Composite Aerospace Structures

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: X602

    Reduced mass composite materials are crucial to the success of aerospace systems, but their adoption is inhibited because they require autoclave consolidation, a process that is prohibitively expensive for large aerospace structure. To remedy this, NASA-LaRC has been developing cost-effective high-performance thermoplastic composite processing equipment that enables out-of-autoclave tape placemen ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  3. Panoramic Stereoscopic Video System for Remote-Controlled Robotic Space Operations

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: F502

    In this project, the development of a novel panoramic, stereoscopic video system was proposed. The proposed system, which contains no moving parts, uses three-fixed position cameras equipped with NASA's Panoramic Refracting Optic (PRO) to generate stereoscopic images over a hemispherical work area. This system will provide an immersive remote environment for robot operation during space missions ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  4. Radiation Shielding and Hydrogen Storage with Multifunctional Carbon

    SBC: ADVANCED FUEL RESEARCH, INC.            Topic: B309

    This project addresses two vital problems for long-term space travel activities: radiation shielding and hydrogen storage for power and propulsion. While both problems have been studied for many years, there is currently no satisfactory technology for providing adequate non-parasitic shielding. Even in low-Earth orbit, astronauts must be closely monitored for radiation exposure, and some mission ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  5. Low Cost/Low Noise Variable Pitch Ducted Fan

    SBC: Aerocomposites, Inc.            Topic: T701

    ACI proposes a design for a Propulsor (Low Cost/Low Noise Variable Pitch Ducted Fan) that has wide application in all sectors of Aviation. Propulsor hardware of this low cost design can be integrated with a broad range of aircraft engines (e.g. existing piston engines, automotive derivative piston engines, new design turbine engines) for use in new design aircraft. The proposed Propulsor desig ...

    STTR Phase I 2005 National Aeronautics and Space Administration
  6. Next Generation MK III Lightweight HUT/Hatch Assembly

    SBC: AIR-LOCK, INCORPORATED            Topic: F401

    A prototype Next Generation MK III Lightweight HUT/Hatch Assembly will be fabricated and delivered during Phase II. Maximum weight reduction for the Hard Upper Torso - Hatch assembly will be acheived via the innovative material selection and cross sectional redesign investigation Air-Lock conducted during Phase I. The intent is to fabricate a lightweight HUT/Hatch Assembly best suited for space & ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  7. Lower Profile, Lighter Weight Space Suit Bearings

    SBC: AIR-LOCK, INCORPORATED            Topic: X301

    Air-Lock will deliver a final report based on the follwoing: 1. Historical summary of bearing design evolution throughout the life of the EMU Program 2. Material research to identify lightweight materials best suited for each beairng. 3. Redesign of current EMU bearings to lower bearing profile and mass.

    SBIR Phase I 2005 National Aeronautics and Space Administration
  8. Building a Rangeland Decision Support System: Linking Ranges Products with DNDC

    SBC: APPLIED GEOSOLUTIONS LLC            Topic: E401

    This proposal is submitted under the Innovative Tools and Techniques Supporting the Practical Uses of Earth Science Observations topic. We seek to evaluate and demonstrate technical approaches for linking remote sensing rangeland products with a soil biogeochemical model to form a decision support system for improved rangeland management. The resulting decision support system will be unique and in ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  9. Novel Long-Term CO2 Removal System

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: B301

    Current Technology for CO2 removal from enclosed air of spacecraft utilizes LiOH canisters for CO2 absorption. This absorption is irreversible so longer flights require more LiOH. For long duration flights it is essential that a small, lightweight system that recovers the CO2 be developed. This allows the CO2 to be used to regenerate O2 for re-use. Compact Membrane systems (CMS) has identified ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
  10. Advanced Product Water Removal and Management (APWR) Fuel Cell System

    SBC: Infinity Fuel Cell and Hydrogen, Inc.            Topic: X604

    The proposed innovation is a passive, self-regulating, gravity-independent Advanced Product Water Removal and management (APWR) system for incorporation into Polymer Electrolyte Membrane (PEM) primary fuel cell power plants. Passive water removal is incorporated into each cell of the power plant stack. Only pressure differential is required to manage within the cell and to remove and discharge li ...

    SBIR Phase I 2005 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government