You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Freeze Casting of Tubular Sulfur Tolerant Materials for Solid Oxide Fuel Cells

    SBC: MILLENNITEK, LLC            Topic: A14AT011

    Solid oxide fuel cells have long suffered from degradation due to impurities in the fuel and complexities associated with dissimilar materials and high operating temperatures.This degradation lowers the usable cell power output and requires ancillary equipment for fuel sulfur removal and reformation.A unique microstructure for the tubular anode will be produced using a novel freeze-casting techniq ...

    STTR Phase II 2017 Department of DefenseArmy
  2. Efficient Arrays for Generating Light Emission (EAGLE)

    SBC: Chip Design Systems Inc.            Topic: AF16AT22

    With today's IRLED devices, >99.4% of input electrical power is converted into parasitic/waste heat. Moreover, as the local temperatures of the pixels increase due to the generated heat, IRLED optical efficiency is further reduced. Overall this severely limits the number and intensity of array pixels that can be simultaneously operated at high apparent temperatures. In Phase 2, we focus on develop ...

    STTR Phase II 2017 Department of DefenseAir Force
  3. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  4. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk. There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution. Radio fre ...

    STTR Phase I 2017 Department of DefenseAir Force
  5. LWIR Fiber Bundle for Thermal Imaging in Gas Turbine Systems

    SBC: CREARE LLC            Topic: AF17AT016

    Improved temperature measurements of thermal barrier coating (TBC) components are needed for gas turbine research and development.Imaging pyrometry systems are preferred because they are non-contact and can measure the complex spatial temperature distribution on components.Measurement in the long-wave infrared (LWIR) band is required for accurate temperature measurements of modern TBCs.Fiber coupl ...

    STTR Phase I 2017 Department of DefenseAir Force
  6. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: Delux Advanced Manufacturing, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the 5-500 m range. The metal electrodes are typically sputter coated onto the substrate, using lithogra ...

    STTR Phase I 2017 Department of DefenseArmy
  7. Biofidelic Rat Surrogate for Blast-Induced Neurotrauma Studies

    SBC: CREARE LLC            Topic: A17AT022

    Blast-induced Traumatic Brain Injury (TBI) is a major threat to the health of military personnel serving in modern theaters. As such, the biomechanical injury pathways of TBI are and have been the focus of many animal studies. However, differences in the experimental setups across laboratories make it difficult to draw definitive conclusions from the resulting data. A tool that can accurately e ...

    STTR Phase I 2017 Department of DefenseDefense Health Agency
  8. Morphing-Duct and Twin Pumpjet Propulsion Concept Design

    SBC: CREARE LLC            Topic: N17AT019

    Existing 50-hp engines used on the Combat Rubber Raiding Craft (CRRC) do not provide the top speed, payload, and range characteristics necessary for missions requiring high speeds and low vibrations across a wide range of craft loads (e.g., light to heavy loading). Designing propulsors with high performance away from an optimum design point remains a difficult problem. Creare and our Research Inst ...

    STTR Phase I 2017 Department of DefenseNavy
  9. Advanced Augmentor Ignition Modeling Tools

    SBC: CREARE LLC            Topic: N17AT003

    Reliable ignition is critical to the operational performance of augmented military engines. Augmentors must reliably ignite when thrust is needed or system (and pilot) safety could be compromised. Augmentor ignition is particularly challenging relative to other combustion systems because the ignition system must function over an extremely wide range of conditions. Optimizing existing igniter syste ...

    STTR Phase I 2017 Department of DefenseNavy
  10. Innovative Packaging to Achieve Extremely Light Weight Sensor Pod Systems

    SBC: MENTIS SCIENCES INC            Topic: N17AT007

    Mentis Sciences, Inc. and the University of New Hampshire will establish the feasibility, as well as identify and track the primary technical risks, of an extremely lightweight electronics pod that is capable of supporting modular sensor components. Feasibility of the pod will be established through validated modeling and simulation.The planned structural approach for the electronics pod is to use ...

    STTR Phase I 2017 Department of DefenseNavy
US Flag An Official Website of the United States Government