Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Reconfigurable Machining Center for Depot Productivity Enhancement

    SBC: CREARE LLC            Topic: AF161019

    Current depot-level manufacturing systems are not responsive to changing requirements and flexible specifications. The serial arrangement of individual work cells results in a lengthy timeline to complete the critically-needed part; thus, critical assets

    SBIR Phase II 2017 Department of DefenseAir Force
  2. Integrable High-Performance Analog Optical Modulators

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF171126

    In this SBIR effort we will develop broadband, low V, high linearity, thin-film lithium niobate on insulator (LNOI) modulators that are fully compatible with silicon photonic integrated circuits (PIC) foundry processes. Developing such devices as well a

    SBIR Phase I 2017 Department of DefenseAir Force
  3. Antimony-based LWIR detectors with low dark current and high quantum efficiency

    SBC: QmagiQ, LLC            Topic: AF171078

    QmagiQ, LLC proposes to fabricate and deliver for evaluation a number of small-format focal plane arrays (FPAs) of antimony-based strained layer superlattice (SLS) photodiodes with longwave infrared (LWIR) cutoff wavelengths ranging from 9 microns to 13 m

    SBIR Phase I 2017 Department of DefenseAir Force
  4. Reduction/Elimination of Unsteady Aerodynamic Loads on Model and Balance Support Systems in Large Scale Wind Tunnels

    SBC: FICS, LLC            Topic: AF171008

    Wind tunnel testing of high performance aerodynamic systems, including force and moment measurements (of larger models), often involve unsteady oscillatory loads which may damage the expensive balance and would also normally impact the data accuracy and a

    SBIR Phase I 2017 Department of DefenseAir Force
  5. Efficient Arrays for Generating Light Emission (EAGLE)

    SBC: Chip Design Systems LLC            Topic: AF16AT22

    With today's IRLED devices, >99.4% of input electrical power is converted into parasitic/waste heat. Moreover, as the local temperatures of the pixels increase due to the generated heat, IRLED optical efficiency is further reduced. Overall this severely limits the number and intensity of array pixels that can be simultaneously operated at high apparent temperatures. In Phase 2, we focus on develop ...

    STTR Phase II 2017 Department of DefenseAir Force
  6. Automated Blade Repair System

    SBC: CREARE LLC            Topic: AF161117

    High pressure compressor blades are subject to damage due to debris strikes and warping due to the elevated pressures and temperatures within the engine. Blade repair is currently performed manually using grinding to blend out the damaged regions. Reliance on manual grinding operations requires highly skilled operators, fails to reach the optimal blade shape, lacks repeatability, and is extremel ...

    SBIR Phase II 2017 Department of DefenseAir Force
  7. Open Standard for Display Agnostic 3D Streaming (DA3DS)

    SBC: Third Dimension Technologies LLC            Topic: AF16AT07

    The Air Force has identified a need for a display agnostic common streaming model for 3D data. Third Dimension Technologies (TDT) and Oak Ridge National Laboratory (ORNL) have formed a consortium to define a 3D streaming model based on open standards for Display Agnostic 3D Streaming (DA3DS). Two factors are driving this need. The first is the dramatic increase in the collection, storage and trans ...

    STTR Phase II 2017 Department of DefenseAir Force
  8. Tools for Cross-Platform Software Development and Performance Projection

    SBC: EM PHOTONICS INC            Topic: AF161088

    Developers of modern software, particularly those targeting mobile or embedded platforms, are presented with a wide variety of hardware choices. Solutions can be built on microprocessors (e.g. x86, ARM, or Power architecture), GPUs (e.g. NVIDIAs Tegra), DSPs, FPGAs, or some combination of these technologies. Not only does this place a significant burden on programmers in understanding the intricac ...

    SBIR Phase II 2017 Department of DefenseAir Force
  9. Advanced RIIC Technology to Increase Density and Efficiency of IRLED Arrays (ART-IDEA)

    SBC: Chip Design Systems LLC            Topic: AF171015

    We propose to study how extraction efficiency can be improved by reducing IRLED pixel pitch. Our approach is to scale the size of RIIC pixel and IRLED device from 24-microns down to 12-microns and to lower the IRLED drive voltage from 10 Volts to 5 Volts.

    SBIR Phase I 2017 Department of DefenseAir Force
  10. Instant k-Space Tomography for Spatial-Spectral Monitoring

    SBC: Phase Sensitive Innovations, Inc.            Topic: AF17AT013

    The Army is frequently forced to operate in hostile climates. Heavy fog, rain, snow, and dust storms can inhibit the performance of tracking technologies such as mid-wave infrared cameras. In such conditions, Army early warning systems are blinded and put personnel and assets at risk. There is a specific need for a degraded visual environment (DVE) penetrative target tracking solution. Radio fre ...

    STTR Phase I 2017 Department of DefenseAir Force
US Flag An Official Website of the United States Government