You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Novel Integrated Model of Missile and Munition Thermal Batteries

    SBC: Erigo Technologies LLC            Topic: A06021

    Thermal batteries are the power source of choice for many weapon systems. While thermal batteries offer designers several key advantages, the design and integration of this technology into new applications suffers from two significant impediments. The first is the lack of suitable design tools, and the second is the time-consuming and expensive effort necessary to qualify a new battery design thr ...

    SBIR Phase I 2006 Department of DefenseArmy
  2. Remote Autonomous Robot Mounted Laser Night Vision Surveillance System

    SBC: OASYS TECHNOLOGY, LLC.            Topic: A06238

    This proposal outlines a development path which leverages a legacy robot sensor system and evolves it into a completely self-contained sensor surveillance system with laser illumination function designed specifically to covertly penetrate architectural glass and vehicular windows. This system will operate as a standalone entity, requiring only power and a simple mounting surface from its host pla ...

    SBIR Phase I 2006 Department of DefenseArmy
  3. A High-Temperature Battlefield Fuel Vaporization Membrane

    SBC: CREARE LLC            Topic: A06173

    The Army seeks to standardize all equipment on its battlefield logistics fuel, JP-8. JP-8 is difficult to use for small-scale, low-power applications, however, since its low vapor pressure and complex composition inhibit complete vaporization. Existing methods for vaporizing logistics fuels require electric power, moving parts, or high temperatures. To address this need, Creare proposes to deve ...

    SBIR Phase I 2006 Department of DefenseArmy
  4. Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: A06122

    We propose to develop “Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material The Innovative Features of the project are: • Detector Arrays on Type II Strained Layer Superlattice (SLS) Material. High Performance Detector Arrays are designed on SLS material. The main advantages of SLS detectors are 1) higher performance and longer minority carrier life time 2) higher operat ...

    SBIR Phase I 2006 Department of DefenseArmy
  5. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W TEK INC            Topic: A06065

    Low-light-level photodetector arrays are proposed for detecting the weak optical emission spectra from the trace atoms in the laser-induced breakdown spectroscopy (LIBS). The proposed semiconductor image intensifier and low-light-level camera utilize the miniaturized and monolithically integrated version of a proven solid-state detector technology, and is expected to be able to detect femto-watts ...

    SBIR Phase I 2006 Department of DefenseArmy
  6. Enhanced DCE-MRI Imaging of Ovarian Cancer

    SBC: CREARE LLC            Topic: A06164

    The recent introduction of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) permits noninvasive imaging of vascular function and characterization of angiogenesis. This emerging capability is critically important in staging disease and screening for cancer. The primary goal of this project is development of fundamental improvements in DCE-MRI imaging methods that provide increased s ...

    SBIR Phase I 2006 Department of DefenseArmy
  7. Rapid Detection of Acetylcholinesterase-Inhibiting Pesticides in Water Using a Handheld Assay and Reader

    SBC: ANP TECHNOLOGIES INC.            Topic: A06159

    We propose that a comparative colorimetric assay be developed that will use a ticket of the same dimensions as the current ANP immunoassay tickets. This will allow the AChE test to be conducted using a similar workflow as the lateral flow immunoassay-based HHAs and be similarly read on the ANP reader to yield an unambiguous result independent of user judgment.

    SBIR Phase I 2006 Department of DefenseArmy
  8. Cooling Objectives and Operative Leverage (COOL) Techniques

    SBC: International Mezzo Technologies, Inc.            Topic: A04248

    The objective of this Phase II program is to develop and demonstrate a high performance heat exchanger technology for military ground vehicles such as the up-armored HMMWV. Mezzo will build a heat exchanger that is more compact, provides improved heat transfer performance, and meets the demands of the harsh environments (such as resistance to sand and dirt fouling) to which military vehicles and ...

    SBIR Phase II 2006 Department of DefenseArmy
  9. Plasma Stabilization and Control of Titanium Welding

    SBC: Erigo Technologies LLC            Topic: A06046

    The welding of titanium is of rapidly increasing importance to the Army, and this trend will accelerate as low-cost titanium becomes available. To facilitate the use of titanium in a growing set of applications, a rapid, reliable, and inexpensive joining process must be established. Gas metal arc welding is a highly desireable joining method because of high production rates and relatively low c ...

    SBIR Phase I 2006 Department of DefenseArmy
  10. Innovative Hardware-Based Chip Control Tool Holder

    SBC: Erigo Technologies LLC            Topic: A06047

    The formation of continuous chips during metal fabrication adversely affects production times, worker safety, and production costs. The Army's ever increasing need for greater mobility and lethality demand greater precision in the machining of traditionally hard-to-machine materials, while balancing cost. Erigo Technologies LLC proposes to develop a replacement tool holder for lathes that will imp ...

    SBIR Phase I 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government