You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: A06122

    We propose to develop “Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material The Innovative Features of the project are: • Detector Arrays on Type II Strained Layer Superlattice (SLS) Material. High Performance Detector Arrays are designed on SLS material. The main advantages of SLS detectors are 1) higher performance and longer minority carrier life time 2) higher operat ...

    SBIR Phase I 2006 Department of DefenseArmy
  2. In-situ Measurement of Automotive Fluids Degradation by Micro-ESR Spectrometry

    SBC: AESOP, INC.            Topic: A05223

    Aesop’s Micro-ESR™ sensor is a miniature electron spin resonance (ESR) sensor designed to continuously measure oxidation, soot, ferrous particles and humidity levels in engine oil and hydraulic fluid. The Micro-ESR sensor’s small size, low power consumption and low cost make it ideal for integration into vehicles, heavy machinery, generators and fixed engine installations. This sensor will a ...

    SBIR Phase II 2006 Department of DefenseArmy
  3. Novel Protein Nanodelivery Systems for Biological Agent Countermeasures

    SBC: ANP TECHNOLOGIES INC.            Topic: A04192

    We propose to continue the development and characterization of a polymeric nanoencapsulation technology that can increase the lifetime of a protein therapeutic agent within a biological system. The materials have been demonstrated to exhibit no cytotoxicity and to efficiently deliver antibody against Protective Antigen of bacillus anthracis.

    SBIR Phase II 2006 Department of DefenseArmy
  4. Rapid Detection of Acetylcholinesterase-Inhibiting Pesticides in Water Using a Handheld Assay and Reader

    SBC: ANP TECHNOLOGIES INC.            Topic: A06159

    We propose that a comparative colorimetric assay be developed that will use a ticket of the same dimensions as the current ANP immunoassay tickets. This will allow the AChE test to be conducted using a similar workflow as the lateral flow immunoassay-based HHAs and be similarly read on the ANP reader to yield an unambiguous result independent of user judgment.

    SBIR Phase I 2006 Department of DefenseArmy
  5. Pathogen Concentration from Complex Water Supplies

    SBC: ANP TECHNOLOGIES INC.            Topic: A06T022

    ANP Technologies proposes to develop a sample concentration system that uses commercial hollow fiber filtration technology with permanent anti-fouling coatings to concentrate biological contaminants in water sources or supplies to a level high enough to be readily detected. The filter technology will allow simple and quick release of the contaminants into a much smaller volume without the use of ...

    STTR Phase I 2006 Department of DefenseArmy
  6. High Sensitivity Rugged Array Detectors for Field Deployed Instruments: Low-Light Level Camera for Laser-Induced Breakdown Spectroscopy (LIBS) and Ram

    SBC: B & W TEK INC            Topic: A06065

    Low-light-level photodetector arrays are proposed for detecting the weak optical emission spectra from the trace atoms in the laser-induced breakdown spectroscopy (LIBS). The proposed semiconductor image intensifier and low-light-level camera utilize the miniaturized and monolithically integrated version of a proven solid-state detector technology, and is expected to be able to detect femto-watts ...

    SBIR Phase I 2006 Department of DefenseArmy
  7. Mobile Embedded Component Suite (MECS)

    SBC: BAND XI INTERNATIONAL, LLC            Topic: A06222

    Band XI International will architect, design, develop and document an Equinox/OSGi based embedded component suite that addresses the need for tight, efficient, and usable: (1) bitmap oriented user interface framework, (2) pluggable off board messaging framework, and (3) device connection framework. Band XI will develop these components in an agile manner, driven by real scenarios and through a tr ...

    SBIR Phase I 2006 Department of DefenseArmy
  8. 1.5- 2.5 kW Diesel-Hybrid Power System for SUGVs

    SBC: D-Star Engineering Corporation            Topic: A06218

    The project aims to engage in detailed definition and preliminary design of the 1.5 to 2.5 kW heavy-fuel diesel-hybrid power system and its subsystems, performance analysis for the subsystems and the system, exploration of its feasibility including costs and risks, comparative performance analysis and assessment of other competing power and energy technologies, and preparation of a plan for devel ...

    SBIR Phase I 2006 Department of DefenseArmy
  9. A Novel Integrated Model of Missile and Munition Thermal Batteries

    SBC: Erigo Technologies LLC            Topic: A06021

    Thermal batteries are the power source of choice for many weapon systems. While thermal batteries offer designers several key advantages, the design and integration of this technology into new applications suffers from two significant impediments. The first is the lack of suitable design tools, and the second is the time-consuming and expensive effort necessary to qualify a new battery design thr ...

    SBIR Phase I 2006 Department of DefenseArmy
  10. Plasma Stabilization and Control of Titanium Welding

    SBC: Erigo Technologies LLC            Topic: A06046

    The welding of titanium is of rapidly increasing importance to the Army, and this trend will accelerate as low-cost titanium becomes available. To facilitate the use of titanium in a growing set of applications, a rapid, reliable, and inexpensive joining process must be established. Gas metal arc welding is a highly desireable joining method because of high production rates and relatively low c ...

    SBIR Phase I 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government