Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Multimodal Acoustic Tool for Inline Pipe Inspection

    SBC: CREARE LLC            Topic: 180PH1

    A Multimodal Acoustic Tool for Inline Pipe Inspection 3/19/2018 The US energy transport pipeline system is a longstanding distribution network with most of its still standing pipes being installed between the 1950s–1970s. Due to degradation mechanisms, such as embrittlement, capable of causing a two-fold reduction in fracture toughness, pipe rupture is a major risk. Current nondestructive ins ...

    SBIR Phase I 2018 Department of Transportation
  2. Rapid Assessment of Air Void System in Fresh Concrete

    SBC: CREARE LLC            Topic: 171FH2

    Proposal title: Rapid Assessment of Air Void System in Fresh Concrete Water expansion during freeze-thaw cycles can cause deterioration in concrete, leading to scaling, cracking, and crumbling over a period of years. Resistance to this damage is achieved with a system of voids formed by adding surfactants to the fresh concrete to stabilize air bubbles naturally entrained during mixing. The volume ...

    SBIR Phase II 2018 Department of Transportation
  3. Bifunctional Regenerative Electrochemical Air Transformation for Human Environments

    SBC: Skyre, Inc.            Topic: T6

    The proposed  Bifunctional Regenerative Electrochemical Air Transformation for Human Environments (BREATHE) for life support and habitation is part of the atmosphere revitalization equipment necessary to provide and maintain a livable environment within the pressurized cabin of crewed spacecraft. Sustainable Innovations (SI) has developed a novel solid state technology for gas compression bas ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Ultra-Thin Ply Formable Material from Reusable Short Carbon Fiber Composites

    SBC: Composites Automation LLC            Topic: T12

    This project develops an ultra-thin and formable prepreg material from reusable short carbon fiber composites (CFC), including process and material development, test panel fabrication and mechanical performance evaluation. Key to superior performance of ultra-thin ply materials is the ability to fabricate high fiber volume and uniform fiber distribution prepreg with low void content and layer thic ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  5. Multi-Spectral Infrared Focal Plane Array For Wildfire And Burning-Biomass Analysis

    SBC: QmagiQ, LLC            Topic: S1

    An important NASA mission is to remotely analyze fires, such as wildfires and burning biomasses, for their chemical content. The chemical species of most interest have infrared spectral signatures at wavelengths ranging from 1.5 microns to 12 microns. A broadband infrared focal plane array (FPA) with that spectral coverage and high quantum efficiency is a key technology to enable this mission. Qma ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Optically Interrogated Thin Film Strain Gauge for Balloon

    SBC: CREARE LLC            Topic: S3

    To support development of atmospheric balloons and gossamer structures, NASA requires a capability for real-time, dynamic strain measurement in thin polymeric membranes during deployment and flight.  This capability will provide quantitative test data to inform balloon design efforts, as well as enable real-time monitoring of material state during flight.  Existing technologies include w ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. High Efficiency 4 K Cryocooler for Space Missions

    SBC: CREARE LLC            Topic: S1

    Future astrophysics missions require efficient, low-temperature cryocoolers to cool advanced instruments or serve as the upper stage cooler for sub-Kelvin refrigerators. Potential astrophysics missions include Lynx, the Origin Space Telescope, and the Superconducting Gravity Gradiometer. Cooling loads for these missions are up to 300 mW at temperatures of 4 to 10 K, with additional loads at higher ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Model-Based Design Assessment and FM Visualization Technologies in TEAMS

    SBC: QUALTECH SYSTEMS, INC.            Topic: S5

    NASA's FM community has identified one of the major problems with FM on the Science Mission Directorate (SMD) missions being that the complexity of FM has often been discovered late in the system development during testing, or in other cases in flight itself requiring unplanned, major spikes in resources to ensure that it will work properly and not create failures in the system that it is tryi ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. ASOMIS

    SBC: APPLIED GEOSOLUTIONS LLC            Topic: S5

    The innovation of the Agricultural SOil Moisture and Irrigation Status (A·SOM·IS) platform is the development of operational and moderate resolution mapping and assessment of soil moisture, irrigation status (irrigated vs not), and crop water stress metrics at field scale for agricultural decision support tools. The platform focuses on utilization of Synthetic Aperture Radar (SAR) an ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. A Compact, Lightweight Electrically Driven Propellant Pump with High Pressure Rise

    SBC: CREARE LLC            Topic: S4

    Reducing the inert mass of propulsion systems in sample return spacecraft will reduce their launch costs and increase opportunity for these missions. Compared to a pressure-fed system, a propellant pump-fed system can significantly reduce overall propulsion system mass, especially for a system with high propellant throughput. To address this need, we propose to develop a compact, lightweight elect ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government