You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Real-Time In-Situ Measurement of Void Fraction and Specific Surface in Fresh Concrete

    SBC: CREARE LLC            Topic: 171FH2

    Water expansion during freeze-thaw cycles can cause deterioration in concrete, leading to scaling, cracking, and crumbling over a period of years. Resistance to this damage is achieved with a system of voids formed by adding surfactants to the fresh concrete to stabilize air bubbles naturally entrained during mixing. The volume fraction, size, and spacing of these voids are critical. It is importa ...

    SBIR Phase I 2017 Department of Transportation
  2. RailMonitor: Real-Time Broken Rail Detection System

    SBC: CREARE LLC            Topic: 171FR2

    Broken rails are a common cause of mainline derailments and a particular concern given the increasing use of our rail system for passenger traffic and petroleum products. The progressive nature of the defects provides an opportunity for early detection of cracks before they become significant enough to cause a derailment. Unfortunately, current inspection technology does not allow these inspection ...

    SBIR Phase I 2017 Department of Transportation
  3. Broad Spectrum Absorption-Fluorescence Method for Determining Adsorption Capacity of Fly Ash

    SBC: PHOSPHORTECH CORP            Topic: 171FH1

    Interference of unburned and activated carbon in fly ash with air-entraining admixtures (AEA’s) in fresh concrete mixtures is a major concern in the concrete industry. Therefore, a rapid and accurate measurement of adsorption capacity of fly ash is of great interest to this industry. In this project, a new method is suggested, which can qualitatively and quantitatively measure different surfact ...

    SBIR Phase I 2017 Department of Transportation
  4. Signal Processing for Layered Sensing

    SBC: VADUM INC            Topic: CBD152006

    Vadum will develop Chemical, Heterogeneous sensor fusion Incident awareness Module (CHIME)asoftware module that will ingest data from a large number of asynchronous, heterogeneous and multi-tiered sensors to automate the process of estimating the source attributes of a chemical or biological release. CHIME generates estimates from a continuous stream of raw sensor data with successive estimates al ...

    SBIR Phase II 2017 Department of DefenseOffice for Chemical and Biological Defense
  5. Improved Thermal and Acoustic Comfort for Motorcycle Helmets

    SBC: CREARE LLC            Topic: 151NH1

    Use of motorcycles helmets significantly reduces the risk of fatality or serious brain injury to riders in the event of a crash, but riders often do not wear helmets in warm weather because of thermal discomfort. We propose to develop an innovative ventilation and cooling system that will maintain a cool, dry environment inside the helmet while also meeting applicable safety standards. The key the ...

    SBIR Phase II 2017 Department of Transportation
  6. Dermal Medical Countermeasures for Chemical Weapons Exposure

    SBC: ZYMERON CORP            Topic: CBD161003

    The skin is the first line of defense against chemical warfare agents including nerve agents and toxic industrial chemicals, providing a possible barrier or delay to systemic distribution. Some chemicals also can act directly on the skin including the vesicants sulfur mustard and lewisite. Early and rapid skin decontamination is extremely important following exposure to CWAs and TICs because it de ...

    SBIR Phase I 2017 Department of DefenseOffice for Chemical and Biological Defense
  7. Low-Output High Precision Automated Powder Disseminator

    SBC: ADVANCED MECHANICAL SYSTEMS TECHNOLOGY,            Topic: CBD06101

    This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a technology does not exist at the present time. After examining existing technologies, we believe that the r ...

    SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense
  8. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  9. Hermetic Textile Closure Hardware System

    SBC: SIGMA K CORP            Topic: CBD04110

    Effective collective protection fabrics must have a reliable closure system. During our Phase I Work Plan, Sigma-K began developing a Hermetic Textile Closure Hardware (HATCH) system. The HATCH combines both a magnetic and geometric self locking mechanism that will provide a hermetic seal when closed. Our current Phase I successes include developing self closing samples that can provide a hermetic ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  10. Model-Based Design of Test Systems for Chemical Protective Clothing

    SBC: CREARE LLC            Topic: CBD02202

    The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
US Flag An Official Website of the United States Government