Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Real-Time In-Situ Measurement of Void Fraction and Specific Surface in Fresh Concrete

    SBC: CREARE LLC            Topic: 171FH2

    Water expansion during freeze-thaw cycles can cause deterioration in concrete, leading to scaling, cracking, and crumbling over a period of years. Resistance to this damage is achieved with a system of voids formed by adding surfactants to the fresh concrete to stabilize air bubbles naturally entrained during mixing. The volume fraction, size, and spacing of these voids are critical. It is importa ...

    SBIR Phase I 2017 Department of Transportation
  2. RailMonitor: Real-Time Broken Rail Detection System

    SBC: CREARE LLC            Topic: 171FR2

    Broken rails are a common cause of mainline derailments and a particular concern given the increasing use of our rail system for passenger traffic and petroleum products. The progressive nature of the defects provides an opportunity for early detection of cracks before they become significant enough to cause a derailment. Unfortunately, current inspection technology does not allow these inspection ...

    SBIR Phase I 2017 Department of Transportation
  3. Improved Thermal and Acoustic Comfort for Motorcycle Helmets

    SBC: CREARE LLC            Topic: 151NH1

    Use of motorcycles helmets significantly reduces the risk of fatality or serious brain injury to riders in the event of a crash, but riders often do not wear helmets in warm weather because of thermal discomfort. We propose to develop an innovative ventilation and cooling system that will maintain a cool, dry environment inside the helmet while also meeting applicable safety standards. The key the ...

    SBIR Phase II 2017 Department of Transportation
  4. Low-Output High Precision Automated Powder Disseminator

    SBC: ADVANCED MECHANICAL SYSTEMS TECHNOLOGY,            Topic: CBD06101

    This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a technology does not exist at the present time. After examining existing technologies, we believe that the r ...

    SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense
  5. Identification and Sorting of Printed Wiring Boards (PWB) within an E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 05NCERP1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide.  Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills, consequently leaching into the water supply.  Due to these concerns, e-waste recycling is a rapidly growing industry.  Unfortunately, most current e-waste recycling processes rely on either m ...

    SBIR Phase II 2006 Environmental Protection Agency
  6. Enhanced Ethanol Diesel Blend for Emission Reduction

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 05NCERB2

    New engine diesel pollution is addressed in the U.S. Environmental Protection Agency (EPA) Clean Diesel Truck and Buses, low sulfur diesel, and nonroad diesel rules.  Unfortunately, slow fleet turnover will extend full implementation.  EPA is interested in both retrofit technologies that reduce emissions (particulate matter, volatile organic pollutants, NOx) from diesel sourc ...

    SBIR Phase I 2006 Environmental Protection Agency
  7. Model-Based Design of Test Systems for Chemical Protective Clothing

    SBC: CREARE LLC            Topic: CBD02202

    The current methodology for testing the penetration resistance of textile materials to various chemical agents has a number of drawbacks, including significant uncertainties in the resulting data, inefficiency and expense, risk to test personnel, and limited range of test conditions. The objective of the proposed work is to apply unique computer models for textiles with accompanying experimental ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  8. A Retrofit and Low-Cost Small Industrial Boiler Flue Gas Purification Technology

    SBC: CM-Tec, Inc.            Topic: 04NCERB1

    This novel technology can simultaneously remove particulate matter smaller than 10 microns (PM10), sulfur dioxide (SO2), nitrogen oxides (NO X), and mercury (Hg) from the flue gases of oil and coal-fired small industrial boilers. The technology uses ozone to oxidize NO into high oxides, and applies an innovative catalytic sorbent material to convert high nitrogen oxides and SO2 into nitric acid an ...

    SBIR Phase I 2005 Environmental Protection Agency
  9. Identification and Sorting of Printed Wiring Boards (PWB) Within An E-Waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: 04NCERG1

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfills and leaching into the water supply. Because of these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on manual hand sorting or differential density ...

    SBIR Phase I 2005 Environmental Protection Agency
  10. Integration of Advanced Inductive Signature Vehicle Detectors with an Advanced Transportation Controller running under the Real Time Linux Operating System

    SBC: Inductive Signature Technologies Inc.            Topic: N/A

    We propose to determine what outputs from the SSAJ measurement system would be suitable for traffic control applications, to determine what the "real time" needs and accuracies are for measurements of signature, speed, acceleration, and jerk (SSAJ), to integrate the output of our IST-222 Standard Signature Output Card with and Advanced Transportation Contorller (ATC) and finally to demonstrate pro ...

    SBIR Phase I 2006 Department of Transportation
US Flag An Official Website of the United States Government