You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of enhanced active damping system for the Marine Corps Expeditionary Fighting Vehicle (EFV)

    SBC: ACTIVE SHOCK, INC.            Topic: N04192

    A semi-active suspension upgrade kit for the SOCOM up-armored HMWWV will be developed that will achieve comparable performance for the entire weight range of a GMV: 8300lbs curb weight to 14,500lbs combat loaded. The baseline performance requirement is equivalent handling, stability and ride quality as an M1113 HMMWV at rated GVW. A dynamic model that incorporates the semi-active suspension into ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  2. Vinyl Ester Compatible High-Modulus Fiber System for Composite Laminates

    SBC: Adherent Technologies, Inc.            Topic: N04094

    An aqueous-based finish (sizing) was developed in Phase I to improve the carbon/vinyl ester interfacial bond. The finish is composed of a reactive coupling agent, a low viscosity vinyl ester resin, a free radical inhibitor, and a surfactant. The reactive finishes substantially improved the carbon/vinyl ester interface compared to unsized or FOE sized materials. Failure mode analysis shows that ...

    SBIR Phase II 2006 Department of DefenseNavy
  3. High Temperature Finishes/Sizings for Polyimide Matrix Composites

    SBC: Adherent Technologies, Inc.            Topic: N04251

    New high-temperature sizings are needed to improve the properties and durability of carbon/polyimide composites. Compatibility with weaving and braiding operations and improved wetting during prepregging or resin infusing polyimide resin is also needed. Achieving these characteristics will result in reducing life cycle costs for jet engine composites through better property translation, reduced ...

    SBIR Phase II 2006 Department of DefenseNavy
  4. Finishing Process to Improve Interfacial Bonding in SiC/BMI Composites

    SBC: Adherent Technologies, Inc.            Topic: N05025

    High-temperature (HT) polymer matrix composites (PMCs) are desired for many aerospace and military applications. Silicon carbide (SiC) fibers provide a potentially attractive reinforcement for HT PMCs for applications ranging from propulsion systems to structures for the orbiting space plane. The sizings routinely added to commercial SiC fibers are not compatible with the new HT matrix resins. ...

    SBIR Phase II 2006 Department of DefenseNavy
  5. Surface Modification of Exfoliated Graphite Nano-Reinforcements

    SBC: Adherent Technologies, Inc.            Topic: A205

    Phase I results showed that two surface treatments, oxidative plasma and reactive finishes, are effective means of modifying the surface chemistry of exfoliated graphite nanoflakes. The surface modifications provide a more compatible surface energy for dispersion in polymers and create well-bonded interfaces with the polymer matrix. In order to be cost effective for NASA and commercial applicati ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  6. Light-Curing Structural Tape for In-Space Repair

    SBC: Adherent Technologies, Inc.            Topic: X1203

    NASA has numerous requirements for in-space repair capabilities to aid future missions beyond earth orbit. A subset of these requirements is adhesive patch materials that provide permanent or temporary repair of a wide variety of surfaces with minimal surface preparation. Prior work on light (UV and visible) curing composite matrix resins for rigidizing inflatable spacecraft shows that there is ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  7. Phosphorous-Containing Epoxy Resins for Room Temperature VARTM

    SBC: Adherent Technologies, Inc.            Topic: N06T017

    The Navy intends to start using a significant quantity of composite structures in surface ship construction in an effort to decrease costs as well as to reduce the visibility of the ships to radar. The large size of the target structures necessitates the use of low temperature, non-autoclave processing techniques such as Vacuum Assisted Resin Transfer Molding (VARTM). In the recent past, most m ...

    STTR Phase I 2006 Department of DefenseNavy
  8. Closed Loop Composite Recycling Process

    SBC: Adherent Technologies, Inc.            Topic: AF06081

    The recycling of composites on a large scale is an unsolved problem. Currently, the material is either ground up into near-worthless fillers, incinerated, or digested using environmentally questionable technology. Adherent Technologies, Inc. has developed a number of technologies to reclaim valuable carbon fiber and other raw materials from these composites in a potentially economically feasible ...

    SBIR Phase I 2006 Department of DefenseAir Force
  9. 1024 x 1024 Snapshot Two-Color Infrared Focal Plane Array (FPA) for Air-to-Ground Applications

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: N05032

    We propose to develop “High Performance, Large Format Mid-Wave Focal Plane Arrays on Type II Strained Layer Superlattice (SLS) Material”. The Innovative Features of the project are: • Detector Arrays on Type II SLS Material. High Performance Detector Arrays are designed on Type II SLS material. The Type II Detector has several advantages as compared to Type I HgCdTe and InSb Detectors. The ...

    SBIR Phase II 2006 Department of DefenseNavy
  10. Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: A06122

    We propose to develop “Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material The Innovative Features of the project are: • Detector Arrays on Type II Strained Layer Superlattice (SLS) Material. High Performance Detector Arrays are designed on SLS material. The main advantages of SLS detectors are 1) higher performance and longer minority carrier life time 2) higher operat ...

    SBIR Phase I 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government