You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of enhanced active damping system for the Marine Corps Expeditionary Fighting Vehicle (EFV)

    SBC: ACTIVE SHOCK, INC.            Topic: N04192

    A semi-active suspension upgrade kit for the SOCOM up-armored HMWWV will be developed that will achieve comparable performance for the entire weight range of a GMV: 8300lbs curb weight to 14,500lbs combat loaded. The baseline performance requirement is equivalent handling, stability and ride quality as an M1113 HMMWV at rated GVW. A dynamic model that incorporates the semi-active suspension into ...

    SBIR Phase II 2006 Department of DefenseSpecial Operations Command
  2. Development of Endurable Thermal Barrier Coatings for Diesel Engine Specific Heat Reduction

    SBC: ADIABATICS INC            Topic: A04250

    The future generation of both military and commercial diesel engines will operate at significantly higher temperatures and pressures than today’s engines. The future combat system diesel engine operating parameters demand significant design improvement of power cylinder insulation. Increased cylinder pressure and reduced cooling requirements, heat energy recovery in the exhaust gas by turbocha ...

    SBIR Phase II 2006 Department of DefenseArmy
  3. Compact Turbochargers for High Power Density Diesel Engines

    SBC: ADIABATICS INC            Topic: A05237

    A high-power density, Low Heat Rejection (LHR) diesel engine design for both traditional and hybrid Future Combat System (FCS) vehicle configurations is being proposed. Work under this proposal includes application of LHR engine technology to improve power density and life cycle durability of a military commercial diesel engine. This engine is General Engine Products, LLC.’s Optimizer 6500 HUM ...

    SBIR Phase II 2006 Department of DefenseArmy
  4. 1024 x 1024 Snapshot Two-Color Infrared Focal Plane Array (FPA) for Air-to-Ground Applications

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: N05032

    We propose to develop “High Performance, Large Format Mid-Wave Focal Plane Arrays on Type II Strained Layer Superlattice (SLS) Material”. The Innovative Features of the project are: • Detector Arrays on Type II SLS Material. High Performance Detector Arrays are designed on Type II SLS material. The Type II Detector has several advantages as compared to Type I HgCdTe and InSb Detectors. The ...

    SBIR Phase II 2006 Department of DefenseNavy
  5. Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material

    SBC: ADVANCED DEVICE TECHNOLOGY, INC.            Topic: A06122

    We propose to develop “Type II Focal Plane Arrays on Strained Layer Superlattices (SLS) Material The Innovative Features of the project are: • Detector Arrays on Type II Strained Layer Superlattice (SLS) Material. High Performance Detector Arrays are designed on SLS material. The main advantages of SLS detectors are 1) higher performance and longer minority carrier life time 2) higher operat ...

    SBIR Phase I 2006 Department of DefenseArmy
  6. Low-Output High Precision Automated Powder Disseminator

    SBC: ADVANCED MECHANICAL SYSTEMS TECHNOLOGY,            Topic: CBD06101

    This proposal presents a Phase I SBIR project to develop a high precision, low disperse rate powder disseminator for the US Army. In the development of the sensitive detecting agent, we need to release a precise amount of C&B agents in the controlled detection experiments. However, such a technology does not exist at the present time. After examining existing technologies, we believe that the r ...

    SBIR Phase I 2006 Department of DefenseOffice for Chemical and Biological Defense
  7. A Laser-Based Device for Work Site Stability Assessment

    SBC: AAC International            Topic: N/A

    DESCRIPTION (provided by applicant): Summary: A laser-based acoustic emission (AE) detection device is proposed for work site structural stability assessment. This new device will take advantage of innovations in laser ultrasonics, artificial intelligence (Al) and advanced acoustic emission technology to provide mine workers with a unique instant, real time stability assessment of immediate rock ...

    SBIR Phase II 2006 Department of Health and Human ServicesCenters for Disease Control and Prevention
  8. Coupled Multibody Dynamics and Computational Fluid Dynamics Simulation of Liquid Sloshing for Tanker Vehicles

    SBC: Advanced Science And Automation Corp            Topic: A04238

    The objective of this proposal is to develop a tool for time-accurate simulation of coupled CFD and multibody dynamics of tanker vehicles and sloshing liquid payloads, that includes integrated pre-processor, solver, and post-processor. The pre-processor allows constructing an object-oriented hierarchical "preliminary" model of the vehicle, tank, and terrain. The pre-processor includes a model tree ...

    SBIR Phase II 2006 Department of DefenseArmy
  9. Advanced Stress Measurement Technologies for Small Turbine Engines

    SBC: AERODYN ENGINEERING, INC.            Topic: A04083

    Aerodyn Engineering proposes to develop a new concept in slip ring design that could operate up to 90,000 RPM with 50 contacts (25 channels), be capable of handling temperatures up to 700°F without external cooling support, weigh less than 2 lb, and be designed to directly support new developments in small turbo-shaft engines.

    SBIR Phase II 2006 Department of DefenseArmy
  10. Tunable, Low Mass, Low Loss, Millimeter Wave, MEMS RF Filters

    SBC: AESOP, INC.            Topic: AF05230

    AESOP proposes to design and manufacture robust, miniaturized, broadly tunable mm-wave bandpass filters for space applications. The mm-wave tunable filters will have an unloaded Q of up to 1500 and the potential for multi-octave tuning ranges, for example from 6 to 18 Ghz, although any tuning range up to the limitations of the packaging, interconnections and actuator can be constructed. Aesop, Inc ...

    SBIR Phase II 2006 Department of DefenseAir Force
US Flag An Official Website of the United States Government