You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. CABIN SMOKE CONTROL- PHASE I

    SBC: Omega Technical Services            Topic: N/A

    WHILE INFREQUENT, THE OCCURENCE OF AN IN-FLIGHT FIRE ABOARD COMMERCIAL AIRCRAFT PRESENTS A DANGEROUS SITUATION WHICH HAS HAD CATASTROPHIC RESULTS IN THOSE FEW CASES IN WHICH THE EMERGENCY HAS DEVELOPED BEYOND THE ABILITY OF THE EQUIPMENT AND CREW TO COPE WITH IT. WHEN FIRE OCCURS IN THE APSSENGER CABIN, THE RESULTING ACCUMULATION OF SMOKE AND HOT GASES PRESENT HAZARDOUS CONDITIONS TO THE OCCUPANTS ...

    SBIR Phase I 1993 Department of Transportation
  2. HYBRID POLYMERIC GLAZING MATERIALS

    SBC: Rolltrusion Inc.            Topic: N/A

    A NEW PROCESS IS PROPOSED FOR THE APPLICATION OF POLYMERIC MATERIALS FOR AUTOMOTIVE WINDOWS. SEMI-CRYSTALLINE POLYMERIC MATERIALS CAN BE RENDERED CLEAR THROUGH 3-D ORIENTATION VIA SOLID STATE PROCESSING. APPLYING THIS TECHNOLOGY TO A HYBRID POLYMER STRUCTURE CAN RESULT IN CHEMICALLY RESISTANT, MECHANICALLY STRONG, OPTICALLY CLEAR AND ECONOMICALLY VIABLE PLASTIC WINDOWS FOR GROUND TRANSPORTATION.

    SBIR Phase I 1993 Department of Transportation
  3. POWDER SYSTEM

    SBC: Energy & Minerals Research            Topic: N/A

    TWO YEARS AGO IT WAS EXPERIMENTALLY SHOWN THAT CHARGED WATERDROPLETS COULD KNOCK-DOWN SMOKE RAPIDLY. WE NOW PROPOSE TO TO DEVELOP A DEVICE WHICH USES A CHRGED FINELY POWERED SOLIDAEROSOL TO KNOCK-DOWN SMOKE. USING A SOLID INSTEAD OF A LIQUID AEROSOL HAS SIGNIFICANT ADVANTAGES. THE SOLID PART ICLES CAN BE PRE-FORMED IN A READY-TO-USE STATE. PARTICLE SIZE CAN BE RIGOROUSLY CONTROLLED AND HAVE OPTIMU ...

    SBIR Phase I 1985 Department of Transportation
  4. RESEARCH TO INVESTIGATE THE POTENTIALS OF ABRASION JET IN TRANSPORT SYSTEMS CONSTRUCTION

    SBC: Fluidyne Corp            Topic: N/A

    HIGH-PRESSURE WATERJET IS ONE OF SEVERAL NEW METHODS FOR CUTTING MATERIALS DEVELOPED DURING THE LAST DECADE. CURRENTLY IT IS USED, AT STATIC WATER PRESSURE UP TO 60,000 PSI, TO CUT A WIDE VARIETY OF SOFT AND MEDIUM-HARD MATERIALS IN FACTORIES; IT HAS BEEN EVALUATED FOR GEOTECHNICAL APPLICATIONS WITH VERY LIMITED SUCCESS. THIS RESEARCH CONCERNS THE USE OF ABRASIVE-ENTRAINED WATERJET FOR CUTTING AND ...

    SBIR Phase II 1985 Department of Transportation
  5. ICING MONITORING EQUIPMENT

    SBC: JONAS, INC.            Topic: N/A

    A SIX MONTH PROGRAM TO DEVELOP A RUGGED NEW DEVICE FOR MONITORING THE ONSET OF ICE FORMATION ON SURFACES OF TRANSPORTATION VEHICLES, ROADS, BRIDGES AND AIRCRAFTS, WILL BE DEVELOPED AND A PROTOTYPE WILL BE LABORATORY TESTED. THE NOVEL GAGE AND ELECTRONIC SYSTEM IS PARTLY BASED ON THE TECHNOLOGY APPLIED TO MEASURE CONDUCTIVITY OF SOLUTIONS. BASED ON EXISTING TECHNOLOGY, AND ALREADY TESTED UNDER HIGH ...

    SBIR Phase II 1985 Department of Transportation
  6. DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS.

    SBC: Pahdalai Coatings Co.            Topic: N/A

    DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS. BUT THERE IS NO INFORMATION AVAILABLEABOUT ITS APPLICATION FOR AIRPORT RUNWAY USE. PANDALAI COATINGS COMPANY PROPOSES TO TAKE UP A STUDY OF POLYMER CONCRETE MATERIALS TO EVALUATE ITS FEASIBILITY AS AN ...

    SBIR Phase I 1985 Department of Transportation
US Flag An Official Website of the United States Government