You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. HYBRID POLYMERIC GLAZING MATERIALS

    SBC: Rolltrusion Inc.            Topic: N/A

    A NEW PROCESS IS PROPOSED FOR THE APPLICATION OF POLYMERIC MATERIALS FOR AUTOMOTIVE WINDOWS. SEMI-CRYSTALLINE POLYMERIC MATERIALS CAN BE RENDERED CLEAR THROUGH 3-D ORIENTATION VIA SOLID STATE PROCESSING. APPLYING THIS TECHNOLOGY TO A HYBRID POLYMER STRUCTURE CAN RESULT IN CHEMICALLY RESISTANT, MECHANICALLY STRONG, OPTICALLY CLEAR AND ECONOMICALLY VIABLE PLASTIC WINDOWS FOR GROUND TRANSPORTATION.

    SBIR Phase I 1993 Department of Transportation
  2. VIDEO COMPRESSION FOR TRANSMISSION OF ATC DISPLAYS TO REMOTETOWER CAB

    SBC: Delta Information Systems, Inc.            Topic: N/A

    THIS DOCUMENT IS AN SBIR TECHNICAL PROPOSAL SUBMITTED TO THEFEDERAL AVIATION ADMINISTRATION BY DELTA INFORMATION SYSTEMS, INC. IN RESPONSE TO SBIR SOLICITATION NUMBER 91-FA11. THE PURPOSE OF THE PROPOSED PROGRAM IS TO INVESTIGATE, ANALYZE, AND DESIGN ALTERNATIVE DATA COMPRESSION SYSTEMS TO EFFICIENTLY TRANSMIT AIR TRAFFIC CONTROL DISPLAY DATA FROM MAJOR AIRPORTS TO SMALLER SATELLITE AIRPORTS ON LI ...

    SBIR Phase II 1992 Department of Transportation
  3. PRESSURE SENSITIVE MICROENCAPSULATED DYE SENSORS FOR USE WITH ANTHROPOMORPHIC CRASH TEST DEVICES

    SBC: MACH I Inc.            Topic: N/A

    THE PROPOSED RESEARCH ADDRESSES A NEED FOR A WORKABLE METHODOLOGY FOR RECORDING THE ENERGY FORCES FROM DIRECT AND SLIDING (ABRASION) CONTACTS ON ANTHROPOMORPHIC DEVICES WITHIN THE INTERIOR OF A VEHICLE ON IMPACT. THE SCOPE OF THIS PROPOSAL IS TO DETERMINE FEASIBILITY OF INCORPORATING CALIBRATED PRESSURE SENSITIVE MICROENCAPSULATED DYE (MED) SENSORS INTO A COATING THAT ADHERES TO ANTHROPOMORPHIC CR ...

    SBIR Phase I 1992 Department of Transportation
  4. ADVANCED ELECTRIC SWITCHING CONCEPTS FOR MAGLEV VEHICLES

    SBC: POWER SUPERCONDUCTOR APPLICATIONS CORP.            Topic: N/A

    THREE SYSTEMS OF ACTIVE GUIDEWAY SWITCHING CONCEPTS ARE PROPOSED WHICH USE FAIL- SAFE ELECTRICAL SWITCHING WITHOUT NEED FOR LARGE MECHANICAL MOVEMENT OF GUIDEWAY STRUCTURAL MEMBERS. THE SPECIFIC APPLICATION OF THIS APPARATUS TO A 300 MPH, 40- 80 TONNE CLASS MAGLEV VEHICLE OF 50-200 PASSENGERS IS USED AS A BASELINE DESIGN WITH A VEHICLE WIDTH 3.65 M AND EXTENDING IN LENGTH FROM 14 M TO 56 M. THE TH ...

    SBIR Phase I 1992 Department of Transportation
  5. ADVANCED MATERIAL CONCEPTS FOR GUARDRAIL END TREATMENTS

    SBC: United Dynamics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of Transportation
  6. POWDER SYSTEM

    SBC: Energy & Minerals Research            Topic: N/A

    TWO YEARS AGO IT WAS EXPERIMENTALLY SHOWN THAT CHARGED WATERDROPLETS COULD KNOCK-DOWN SMOKE RAPIDLY. WE NOW PROPOSE TO TO DEVELOP A DEVICE WHICH USES A CHRGED FINELY POWERED SOLIDAEROSOL TO KNOCK-DOWN SMOKE. USING A SOLID INSTEAD OF A LIQUID AEROSOL HAS SIGNIFICANT ADVANTAGES. THE SOLID PART ICLES CAN BE PRE-FORMED IN A READY-TO-USE STATE. PARTICLE SIZE CAN BE RIGOROUSLY CONTROLLED AND HAVE OPTIMU ...

    SBIR Phase I 1985 Department of Transportation
  7. ICING MONITORING EQUIPMENT

    SBC: JONAS, INC.            Topic: N/A

    A SIX MONTH PROGRAM TO DEVELOP A RUGGED NEW DEVICE FOR MONITORING THE ONSET OF ICE FORMATION ON SURFACES OF TRANSPORTATION VEHICLES, ROADS, BRIDGES AND AIRCRAFTS, WILL BE DEVELOPED AND A PROTOTYPE WILL BE LABORATORY TESTED. THE NOVEL GAGE AND ELECTRONIC SYSTEM IS PARTLY BASED ON THE TECHNOLOGY APPLIED TO MEASURE CONDUCTIVITY OF SOLUTIONS. BASED ON EXISTING TECHNOLOGY, AND ALREADY TESTED UNDER HIGH ...

    SBIR Phase II 1985 Department of Transportation
  8. DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS.

    SBC: Pahdalai Coatings Co.            Topic: N/A

    DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS. BUT THERE IS NO INFORMATION AVAILABLEABOUT ITS APPLICATION FOR AIRPORT RUNWAY USE. PANDALAI COATINGS COMPANY PROPOSES TO TAKE UP A STUDY OF POLYMER CONCRETE MATERIALS TO EVALUATE ITS FEASIBILITY AS AN ...

    SBIR Phase I 1985 Department of Transportation
US Flag An Official Website of the United States Government