You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Feasibility of an ultrasonic based instrument for assessing in-situ pipeline coatings

    SBC: Fbs, Inc.            Topic: N/A

    FBS, Inc. proposes to establish the feasibility of an ultrasonically based device for in-situ evaluation of pipeline coatings and for the archiving of coating properties. Based on our experience gained through DOT and EPRI sponsored work on long range ultrasonics, buried pipes, and tar coated pipes we recognize the need for coating characterization not only as an important factor for inspection d ...

    SBIR Phase I 2005 Department of Transportation
  2. Compact Laser Shearography System for Crack Detection

    SBC: Laser Technology Inc.            Topic: N/A

    Laser Technology Inc. has demonstrated for the first time, the detection of non-visible cracks of less than 10 microns soon after casting of high performance concrete test prisms. Fine cracks may be associated with the two leading causes of concrete deterioration, delayed ettringite formation and alkali-silica reaction. Laser Technology is a leading developer, manufacturere and provider of laser ...

    SBIR Phase I 2005 Department of Transportation
  3. HYBRID POLYMERIC GLAZING MATERIALS

    SBC: Rolltrusion Inc.            Topic: N/A

    A NEW PROCESS IS PROPOSED FOR THE APPLICATION OF POLYMERIC MATERIALS FOR AUTOMOTIVE WINDOWS. SEMI-CRYSTALLINE POLYMERIC MATERIALS CAN BE RENDERED CLEAR THROUGH 3-D ORIENTATION VIA SOLID STATE PROCESSING. APPLYING THIS TECHNOLOGY TO A HYBRID POLYMER STRUCTURE CAN RESULT IN CHEMICALLY RESISTANT, MECHANICALLY STRONG, OPTICALLY CLEAR AND ECONOMICALLY VIABLE PLASTIC WINDOWS FOR GROUND TRANSPORTATION.

    SBIR Phase I 1993 Department of Transportation
  4. POWDER SYSTEM

    SBC: Energy & Minerals Research            Topic: N/A

    TWO YEARS AGO IT WAS EXPERIMENTALLY SHOWN THAT CHARGED WATERDROPLETS COULD KNOCK-DOWN SMOKE RAPIDLY. WE NOW PROPOSE TO TO DEVELOP A DEVICE WHICH USES A CHRGED FINELY POWERED SOLIDAEROSOL TO KNOCK-DOWN SMOKE. USING A SOLID INSTEAD OF A LIQUID AEROSOL HAS SIGNIFICANT ADVANTAGES. THE SOLID PART ICLES CAN BE PRE-FORMED IN A READY-TO-USE STATE. PARTICLE SIZE CAN BE RIGOROUSLY CONTROLLED AND HAVE OPTIMU ...

    SBIR Phase I 1985 Department of Transportation
  5. ICING MONITORING EQUIPMENT

    SBC: JONAS, INC.            Topic: N/A

    A SIX MONTH PROGRAM TO DEVELOP A RUGGED NEW DEVICE FOR MONITORING THE ONSET OF ICE FORMATION ON SURFACES OF TRANSPORTATION VEHICLES, ROADS, BRIDGES AND AIRCRAFTS, WILL BE DEVELOPED AND A PROTOTYPE WILL BE LABORATORY TESTED. THE NOVEL GAGE AND ELECTRONIC SYSTEM IS PARTLY BASED ON THE TECHNOLOGY APPLIED TO MEASURE CONDUCTIVITY OF SOLUTIONS. BASED ON EXISTING TECHNOLOGY, AND ALREADY TESTED UNDER HIGH ...

    SBIR Phase II 1985 Department of Transportation
  6. DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS.

    SBC: Pahdalai Coatings Co.            Topic: N/A

    DUE TO THE IMPROVED MECHNICAL PROPERTIES AND DURABILITY OF POLYMER CONCRETE MATERIALS, THERE IS A LOT OF INTEREST IN INTHE HIGHWAY COMMUNITY FOR USE OF THESE MATERIALS FOR PAV PAVEMENT APPLICATIONS. BUT THERE IS NO INFORMATION AVAILABLEABOUT ITS APPLICATION FOR AIRPORT RUNWAY USE. PANDALAI COATINGS COMPANY PROPOSES TO TAKE UP A STUDY OF POLYMER CONCRETE MATERIALS TO EVALUATE ITS FEASIBILITY AS AN ...

    SBIR Phase I 1985 Department of Transportation
US Flag An Official Website of the United States Government