You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Gallium Arsenide (GaAs)- Superlattice Light Emitting Diode Arrays (SLEDS)

    SBC: Chip Design Systems Inc.            Topic: MDA13017

    We propose to monolithically integrate an infrared light emitting diode (IRLED) array on the backside of a GaAs substrate whose frontside contains an array of driver circuits. We will develop smaller GaAs substrate via technology to enable smaller pixel pitch and realize a large-scale GaAs-SLEDS read-in integrated circuit (RIIC). Our team consists of experts in IRLED fabrication, RIIC design, Ga ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  2. Process Optimization of Needled Carbon/ silica carbide (C/SiC) Structural Insulators

    SBC: MATERIALS RESEARCH & DESIGN INC            Topic: MDA13025

    Some missiles employ a throttleable divert and altitude control system (TDACS) to maneuver the kill vehicle to the target. Hot gas valve components in the TDACS must survive long burn times at high pressures and high temperatures. Recently the team of Materials Research & Design (MR&D), Allcomp, and Southern Research Institute (SoRI) has developed a needled C/SiC composite that exhibits strength ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  3. Self-Contained Sub Centimeter Positioning Platform

    SBC: TRUNAV LLC            Topic: 812N

    The goal of this project is to develop, prototype, and experimentally validate a new Differential Global Navigation Satellite System (DGNSS) capable of providing sub-centimeter positioning accuracy for quasi-static scientific, survey, and structural health monitoring application. The main feature of the proposed DGNSS solution is that it leverages publically available GNSS reference data from exis ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  4. Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor

    SBC: PIASECKI AIRCRAFT CORP            Topic: 845RWP

    Piasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  5. Integrated Computational System for Electrochemical Device Design and Simulation

    SBC: ILLINOISROCSTAR LLC            Topic: Z104

    During the Phase I project, major portions of a base, open-source, easily extensible battery modeling system have been developed with a modern, modular architecture and methods. In addition to the new modules and architecture built by Illinois Rocstar, we have identified a number of available tools that fit well with our vision of the final ICED product. Open-source tools from the Oak Ridge Nation ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  6. Handheld Electronics EHM Sensor Probe for Determination of Remaining Useful Life

    SBC: NOKOMIS INC            Topic: A104

    National Aeronautical and Space Administration's (NASA) Aviation Safety Program "seeks capabilities furthering the practice of proactive safety management." One area of particular interest is the prognostication of Remaining Useful Life (RUL) of avionic systems. In response, Nokomis is proposing to develop an Electronic Health Monitoring (EHM) Sensor Unit which would be able provide accurate est ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  7. Advanced Capabilities Medical Suction Device

    SBC: UMPQUA RESEARCH COMPANY            Topic: H1202

    An innovative Microgravity Compatible Medical Suction Device (MCMSD) is proposed for the efficient aspiration and containment of bodily fluids and vomitus in a microgravity environment without the release of infectious agents. A design developed and tested in the Phase I work consisted of a reusable vacuum shell and disposable cartridges. Cartridges were capable of retaining bodily fluid simulan ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  8. Titanium-Water Heat Pipe Radiator for Spacecraft Fission Power

    SBC: ADVANCED COOLING TECHNOLOGIES INC            Topic: H802

    In this SBIR Phase II program Advanced Cooling Technologies, Inc. (ACT) proposes to develop titanium/water heat pipes suitable for Spacecraft Fission Power applications. NASA is currently examining small fission power reactors design, such as the Kilopower, which aims to provide roughly 1 kW of electric power. Kilopower plans to use titanium/water heat pipes to remove the waste heat from the cold ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  9. High-Efficiency, Radiation-Hard, Lightweight IMM Solar Cells

    SBC: MICROLINK DEVICES INC            Topic: S301

    In the proposed Phase II project, MicroLink and its collaborator, Rochester Institute of Technology (RIT), will incorporate quantum dots (QDs) in the GaAs and InGaAs subcells of an InGaP/GaAs/InGaAs triple-junction solar cell to increase the radiation tolerance and thereby improve the end-of-life performance of the solar cell by >5%. The quantum dot solar cell will be grown in an inverted metamorp ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  10. Low-Cost, Manufacturable, 6-Inch Wafer Bonding Process for Next-Generation 5-Junction IMM+Ge Photovoltaic Devices

    SBC: MICROLINK DEVICES INC            Topic: Z101

    To continue the trend towards ever more efficient photovoltaic devices, next-generation multi-junction cells will be based on increasingly complex structures. These structures will require the ability to join two or more independently grown epitaxial structures together via wafer bonding which is a complicated process to include in a high-volume manufacturing environment using conventional wafer ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government