You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Self-Contained Sub Centimeter Positioning Platform
SBC: TRUNAV LLC Topic: 812NThe goal of this project is to develop, prototype, and experimentally validate a new Differential Global Navigation Satellite System (DGNSS) capable of providing sub-centimeter positioning accuracy for quasi-static scientific, survey, and structural health monitoring application. The main feature of the proposed DGNSS solution is that it leverages publically available GNSS reference data from exis ...
SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration -
Whimbrel Unmanned Aircraft System-Borne Atmospheric and Sea Surface Temperature (SST) Sensor
SBC: PIASECKI AIRCRAFT CORP Topic: 845RWPPiasecki Aircraft (PiAC) proposes to continue development and testing efforts of the Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel UAS, a low cost, expendable, air-deployed weather survey unmanned aircraft system. The Whimbrel USA has been developed to support the Tropical Cyclone Boundary Layer mission requirements and contains sensors an ...
SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration -
Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique
SBC: T.E.A.M., INC. Topic: H701Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating potential weak spots at the panel joints. In Pha ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Integrated Computational System for Electrochemical Device Design and Simulation
SBC: ILLINOISROCSTAR LLC Topic: Z104During the Phase I project, major portions of a base, open-source, easily extensible battery modeling system have been developed with a modern, modular architecture and methods. In addition to the new modules and architecture built by Illinois Rocstar, we have identified a number of available tools that fit well with our vision of the final ICED product. Open-source tools from the Oak Ridge Nation ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Handheld Electronics EHM Sensor Probe for Determination of Remaining Useful Life
SBC: NOKOMIS INC Topic: A104National Aeronautical and Space Administration's (NASA) Aviation Safety Program "seeks capabilities furthering the practice of proactive safety management." One area of particular interest is the prognostication of Remaining Useful Life (RUL) of avionic systems. In response, Nokomis is proposing to develop an Electronic Health Monitoring (EHM) Sensor Unit which would be able provide accurate est ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Advanced Capabilities Medical Suction Device
SBC: UMPQUA RESEARCH COMPANY Topic: H1202An innovative Microgravity Compatible Medical Suction Device (MCMSD) is proposed for the efficient aspiration and containment of bodily fluids and vomitus in a microgravity environment without the release of infectious agents. A design developed and tested in the Phase I work consisted of a reusable vacuum shell and disposable cartridges. Cartridges were capable of retaining bodily fluid simulan ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Titanium-Water Heat Pipe Radiator for Spacecraft Fission Power
SBC: ADVANCED COOLING TECHNOLOGIES INC Topic: H802In this SBIR Phase II program Advanced Cooling Technologies, Inc. (ACT) proposes to develop titanium/water heat pipes suitable for Spacecraft Fission Power applications. NASA is currently examining small fission power reactors design, such as the Kilopower, which aims to provide roughly 1 kW of electric power. Kilopower plans to use titanium/water heat pipes to remove the waste heat from the cold ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
High-Efficiency, Radiation-Hard, Lightweight IMM Solar Cells
SBC: MICROLINK DEVICES INC Topic: S301In the proposed Phase II project, MicroLink and its collaborator, Rochester Institute of Technology (RIT), will incorporate quantum dots (QDs) in the GaAs and InGaAs subcells of an InGaP/GaAs/InGaAs triple-junction solar cell to increase the radiation tolerance and thereby improve the end-of-life performance of the solar cell by >5%. The quantum dot solar cell will be grown in an inverted metamorp ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Low-Cost, Manufacturable, 6-Inch Wafer Bonding Process for Next-Generation 5-Junction IMM+Ge Photovoltaic Devices
SBC: MICROLINK DEVICES INC Topic: Z101To continue the trend towards ever more efficient photovoltaic devices, next-generation multi-junction cells will be based on increasingly complex structures. These structures will require the ability to join two or more independently grown epitaxial structures together via wafer bonding which is a complicated process to include in a high-volume manufacturing environment using conventional wafer ...
SBIR Phase II 2015 National Aeronautics and Space Administration -
Ultraprecision Pointing Accuracy for SmallSat/CubeSat Attitude Control Systems
SBC: QORTEK INC Topic: S305The Phase I program concluded with the successful demonstration of a piezo enhanced pointing system targeted to the CubeSat class of satellites. The Phase I program results also surpassed the Phase I goals allowing the proposed Phase II program to further push the capabilities and design of the approach. The main objective of the Phase II program is to further quantify the performance of the Att ...
SBIR Phase II 2015 National Aeronautics and Space Administration