You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Additive Manufacturing for RF Materials and Antennas

    SBC: Delux Advanced Manufacturing, LLC            Topic: A18020

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards more integrated platforms that utilize all available space. For radiating systems, this will require exploring innovative design methods, materials and manufacturing approaches to realize cost-effective, customizable and conformal antennas. An attractive solution to this challenge is offered by additive ...

    SBIR Phase II 2019 Department of DefenseArmy
  2. Low-cost Imager for Heavily Degraded Visual Environments

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18040

    This project aims to develop a low-cost millimeter-wave (mmW) imaging system for ground vehicles, to operate in combination with a long-wave infrared (LWIR)camera. Such a system will mitigate the challenges of driving in degraded visual environments (DVE) including night time, fog, dust, or smoke by providing real-time image of the vehicle surrounding independent from the presence of naturally occ ...

    SBIR Phase II 2019 Department of DefenseArmy
  3. Photonically-Enabled Software Defined Radios for Broadband Applications

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A19079

    Software defined radios (SDRs) have redefined many areas of modern electronics, from enabling reconfigurable communications to rapid prototyping of new electronic support concepts. However, current implementations of SDRs are limited by the underlying electronic approaches used to realize them. Herein, we describe a novel photonically-enabled SDR (PESDR) that utilized the inherently broadband natu ...

    SBIR Phase I 2019 Department of DefenseArmy
  4. Passive Wind Speed Measurement through Image Analysis

    SBC: EM PHOTONICS INC            Topic: A18154

    Cross-wind speed is a key factor in computing a ballistic solution, particularly at long ranges. Reading cross-wind is one of the most difficult jobs of a marksman. Current automated cross-wind sensors are too large and expensive for large scale deployments. This effort focuses on developing a passive-optical-imagery-based software application for computing the cross-wind speed. Being software bas ...

    SBIR Phase I 2019 Department of DefenseArmy
  5. Millimeter-wave Modulators for Sparse Imagers

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A18BT017

    In this Phase I SBIR effort we will develop advanced electro-optic (EO) sensing module that are capable of efficiently up-converting mmW signal into optical sidebands for passive millimeter wave imaging applications. Conversion efficiency of the modulators can be significantly enhanced by virtual of thin-film Lithium niobate on insulator (TFLNOI), RF resonator, and optical resonator, in which the ...

    STTR Phase I 2019 Department of DefenseArmy
  6. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: Delux Advanced Manufacturing, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the micron range. The metal electrodes are typically sputter coated onto the substrate, using lithographic ...

    STTR Phase II 2019 Department of DefenseArmy
  7. Printable Materials with Embedded Electronics and Radio Frequency Components

    SBC: Delux Advanced Manufacturing, LLC            Topic: A16006

    To reduce size, weight, power and cost (SWaP-c), military platforms have been evolving towards a more integrated design approach that efficiently utilizes all available space. In fact, to accommodate limited space constraints many commercial off-the-shelf (COTS) systems will need to be replaced by custom designed and fabricated components. For radiofrequency (RF) electronic systems, this will requ ...

    SBIR Phase II 2017 Department of DefenseArmy
  8. Functional Additive Manufacturing for Printable & Networkable Sensors to Detect Energetics and Other Threat Materials

    SBC: Delux Advanced Manufacturing, LLC            Topic: A17AT004

    Chemiresistors are an important class of electronic sensors that detect the presence of analytes/chemicals via a change in the resistance of a sensor element. A typical interdigitated electrode array is deposited onto an insulating substrate with metallic electrodes that have feature sizes in the 5-500 m range. The metal electrodes are typically sputter coated onto the substrate, using lithogra ...

    STTR Phase I 2017 Department of DefenseArmy
  9. Dense Arrays for High-Fidelity, Optically-Sampled Passive Millimeter-wave Imaging

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A13040

    Under the proposed effort, PSI will continue to develop a novel pmmW imaging technology developed under a prior Navy program to realize dense form factor arrays. This technology is based on an optical upconverted distributed aperture technology that can make large effective apertures in low SWaP form factors thereby maximizing achievable resolution. This sensor technology has already reached TRL 6 ...

    SBIR Phase II 2017 Department of DefenseArmy
  10. Locality Scanner for Helicopter Pilotage and Hazard Avoidance

    SBC: PHASE SENSITIVE INNOVATIONS INC            Topic: A15070

    Degraded visual environment (DVI) presents a challenge for helicopter pilotage, particularly in close proximity to potential hazards such as vegetation, poles, wires, buildings, vehicles, personnel, equipment, nearby terrain, other aircraft, or ship superstructures. To safely negotiate these hazards, the aircrew must maintain a continuous awareness of the environment that can include both static a ...

    SBIR Phase II 2017 Department of DefenseArmy
US Flag An Official Website of the United States Government